Tippette Tippette FULL SIZED ROCKER SWITCHES The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. The Tippette Series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes international agency certifications and ratings to 26 amps for select circuits. Product Highlights: Ratings Up to 26 Amps 250 VAC Illuminated or Non-Illuminated Multiple Termination, Mounting and Rocker Options Typical Applications: General Purpose Applications Commercial Food Equipment Recreational Vehicles Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | Tippette Actuator Styles & Special Circuits - General Specifications Electrical Contact Rating Life Contacts Terminals 15 amps, 125 VAC 10 amps, 250 VAC 3/4 HP 125-250 VAC 15 amps, 12-30 VDC 25,000 cycles circuit dependent 50,000 cycles circuit dependent consult factory for applicable circuits. Fine silver, silver cad-oxide Brass or copper/silver plate 1/4” (6.3mm) Quick Connect terminations standard. Solder lug - Brass Tin Plated Wire Lead 16 gauge standard 105°C 600VAC Screw Terminals - Brass Agency Certifications Select circuits and constructions with VDE/IEC approvals are available. Consult factory Physical Lighted Incandescent - rated 10,000 hours Neon - rated 25,000 hours Bracket - Actuator WBL/MBL optional external gasket panel seal Phenolic (150°C) Nylon 66 (105°C) Seals Base Rocker/Bracket Mechanical Endurance 100,000 cycles minimum Mounting 1.190 [30.22] MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .040 min. - .250 max. .680 [17.27] .830 [21.08] 55˚ - 4 places 1.450 [36.83] *Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com TIG/TIH/TII & LTIL/LTIG-Series Rocker & Paddle Switches - Ordering Schemes | 3 TIGA51 6M 2 Actuator Style 1 Base Part Number BL MBL 3 Actuator Color 1 BASE PART NUMBER: SERIES/POLES / CIRCUITRY 8,11 / RATING 7 / TERMINATION 10 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 6-28VDC Single Pole in Double Pole base 2 Double Pole solder .250 screw wire solder .250 screw lug tab term. leads lug tab term. TIGA50 TIGA51 TIGA54 TIGA55 On-None-Off TIGK50 TIGK51 TIGK54 TIGA5A TIGA5B TIGA5E TIGA5F (On)-None-Off TIGK5A TIGK5B TIGK5E TIGA5L TIGA5M TIGA5S TIGA5T On-None-(Off) TIGK5L TIGK5M TIGK5S TIGB50 TIGB51 TIGB54 TIGB55 On-None-On TIGL50 TIGL51 TIGL54 TIGB5A TIGB5B TIGB5E TIGB5F On-None-(On) TIGL5A TIGL5B TIGL5E TIGC50 TIGC51 TIGC54 TIGC55 On-Off-On TIGM50 TIGM51 TIGM54 TIGC5A TIGC5B TIGC5E TIGC5F On-Off-(On) TIGM5A TIGM5B TIGM5E TIGC5L TIGC5M TIGC5S TIGC5T (On)-Off-(On) TIGM5L TIGM5M TIGM5S Three Pole Four Pole solder .250 screw wire solder .250 screw lug tab term. leads lug tab term. TIHK50 TIHK51 TIHK54 TIHK55 On-None-Off TIIK50 TIIK51 TIIK54 TIHK5A TIHK5B TIHK5E TIHK5F (On)-None-Off TIIK5A TIIK5B TIIK5E TIHK5L TIHK5M TIHK5S TIHK5T On-None-(Off) TIIK5L TIIK5M TIIK5S TIHL50 TIHL51 TIHL54 TIHL55 On-None-On TIIL50 TIIL51 TIIL54 TIHL5A TIHL5B TIHL5E TIHL5F On-None-(On) TIIL5A TIIL5B TIIL5E TIHM50 TIHM51 TIHM54 TIHM55 On-Off-On TIIM50 TIIM51 TIIM54 TIHM5A TIHM5B TIHM5E TIHM5F On-Off-(On) TIIM5A TIIM5B TIIM5E TIHM5L TIHM5M TIHM5S TIHM5T (On)-Off-(On) TIIM5L TIIM5M TIIM5S VDE APPROVED 10A 250VAC, 15A 125VAC, 12(6)A 250VAC T85 Single Pole in Double Pole base 2 Double Pole solder .250 wire solder .250 wire lug tab lead lug tab lead TIGA90 TIGA91 TIGA95 On-None-Off TIGK90 TIGK91 TIGK95 TIGB90 TIGB91 TIGB95 On-None-On TIGL90 TIGL91 TIGL95 TIGC90 TIGC91 TIGC95 On-Off-On TIGM90 TIGM91 TIGM95 4 Bracket 3 ACTUATOR COLOR 9 BL Black WH White wire leads TIGK55 TIGK5F TIGK5T TIGL55 TIGL5F TIGM55 TIGM5F TIGM5T wire leads TIIK55 TIIK5F TIIK5T TIIL55 TIIL5F TIIM55 TIIM5F TIIM5T Additional ratings up to 20A 125-277VAC, 1 1/2HP 125 VAC, 2HP 250VAC are available. Consult factory for specifics. 2 ACTUATOR STYLE 1S Angular/Smooth Face Gloss 12 1C Angular/Cross Serrations Gloss 12 1F Flatted/Smooth Face Gloss 12 1L Angular/Longline Serrations Gloss 1,12 2L Long Smooth/Narrow 14 LTILA51 1 Base Part Number 6M 6S 7S 7N 7P 6M 2 Actuator Style Curved/Smooth Face Matte 3 Curved/Smooth Face Gloss 3 Rounded Paddle/Smooth Face Gloss 1 Witch’s Hat/Narrow 14 Witch’s Hat/Wide 14 BL 3 Actuator Color RC 4 Lens Color 1 BASE PART NUMBER: SERIES / POLES / ILLUMINATION / CIRCUITRY 12 / RATING 10 / TERMINATION 14 10A 250VAC, 15A 125VAC, 3/4 HP 125-250VAC, 15A 15-28VDC illuminated Single Pole in Double Pole base illuminated Double Pole solder .250 screw wire solder .250 screw wire lug tab term. leads lug tab term leads LTILA50 LTILA51 LTILA54 LTILA55 On-None-Off LTIGK50 LTIGK51 LTIGK54 LTIGK55 LTILA5A LTILA5B LTILA5E LTILA5F (On)-None-Off LTIGK5A LTIGK5B LTIGK5E LTIGK5F LTILA5L LTILA5M LTILA5S LTILA5T On-None-(Off) LTIGK5L LTIGK5M LTIGK5S LTIGK5T LTILB50 LTILB51 LTILB54 LTILB55 On-None-On LTIGL50 LTIGL51 LTIGL54 LTIGL55 LTILB5A LTILB5B LTILB5E LTILB5F On-None-(On) LTIGL5A LTIGL5B LTIGL5E LTIGL5F LTILC50 LTILC51 LTILC54 LTILC55 On-Off-On LTIGM50 LTIGM51 LTIGM54 LTIGM55 LTILC5A LTILC5B LTILC5E LTILC5F On-Off-(On) LTIGM5A LTIGM5B LTIGM5E LTIGM5F LTILC5L LTILC5M LTILC5S LTILC5T (On)-Off-(On) LTIGM5L LTIGM5M LTIGM5S LTIGM5T Additional ratings up to 12A 250VAC, 17A 125 VAC, 3/4 HP 125 VAC, 1HP 250VAC are available. Consult factory for specifics. Three pole switch is also available: Substitute H for fourth digit of part number. ex. LTIHK51 Notes: 1 NBL, FN, & FW brackets only. Double pole circuits provided with 3 pole base. 2 LTIL-Series with NBL, FN, & FW brackets only. 3 NBL, WBL, & MBL brackets only. With 6M actuator, bracket will also be matte finish. 4 1S, 1C, 1L & 7S with NBL bracket only available with LTIL-Series. 5 6M, 6S actuators only. 6 Not available with 6M and 6S actuators. 7 Not recommended with neon lamps. 8 Consists of WBL bracket, neoprene seal, dummy rivets at open holes. Consult factory for agency approval status. 9 Not recommended with blue or green lenses. 10 All ratings are appropriate for usage in low voltage applications. 11 Custom colors and additional bracket styles are available, consult factory. 12 ( ) - momentary 13 All double throw circuits supplied with two lenses. To specify two different lens colors, specify second color, after first color. (ex. LTIGM51-6S-BL-RC/GN-WBL-12V) 14 .187 tab and PC terminations are also available. Consult factory for catalog number callout. RD Red 4 BRACKET STYLE 9 A Screw Mount 5 B Screw Mount 5,12 C Screw Mount 5 H Screw Mount 5 NBL Nylon Black WBL Water shedding Black 4 MBL Marine Style Black 4,6 FN Metal Snap-In 5 FN BLK Black Metal Snap-In 5 FN SS Stainless Steel Snap-In 5 FW Wide Stainless Steel Snap-In 5 Notes: 1 NBL, FN, & FW brackets only. 2 For single pole switch in a single pole base, specify TIL with single pole circuitry/rating/termination. 3 NBL, WBL, & MBL brackets only. With 6M actuator, brackets also will be matte finish. 4 6M & 6S actuators only 5 Not available with 6M & 6S actuators. 6 Consists of WBL bracket, neoprene seal, and dummy rivets at open holes. Consult factory for agency approval status. 7 All ratings are appropriate for usage in low voltage applications. 8 For additional special circuits, see catalog. 9 Custom colors are available, consult factory. 10 .187 tab and PC terminations are also available. Consult factory for catalog number callout. 11 ( ) momentary 12 Not available with WBL or MBL style brackets. 13 Available with bracket A, C or H only. 14 Not available with MBL, WBL or H brackets. Can be supplied as a double rocker to control separate poles of a TIG,TIH or TII switch. Consult factory for details. MBL 5 Bracket 12V 6 Lamp Voltage 2 ACTUATOR STYLE 4 1S Angular/Smooth Face Gloss 1 1C Angular/Cross Serrations Gloss 1 1L Angular/Longline Serrations Gloss 1 6M Curved/Smooth Face Matte 3 6S Curved/Smooth Face Gloss 3 7S Rounded Paddle/Smooth Face Gloss 2 3 ACTUATOR COLOR 11 BL Black WH White RD Red 4 LENS COLOR 13 AM Amber RC Red LU Blue 7 CL Clear GN Green 7 WH White 5 BRACKET STYLE 11 NBL Nylon Black WBL Water shedding Black 5 MBL Marine Style Black 5,8 FN Metal Snap-In 4,6 FN BLK Black Metal Snap-In 4,6 FN SS Stainless Steel Snap-In 4,6 6 LAMP VOLTAGE neon 9 125N 125 volt 250N 250 volt incandescent 6V 6 volt 12V 12 volt 18V 18 volt 24V 24 volt 28V 28 volt Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | Tippette Actuator Styles & Special Circuits - Dimensional Specifications .650[16.51] .075[1.91] DIA .125[3.18] DIA .330[8.38] 1.069[27.15] .392[9.95] .372[9.45] .055[1.40] DIA .437[11.09] .394[10.00] .250[6.35] .187[4.74] .187[4.74] SOLDER LUG .250 TAB (Q.C.) TERMINAL TYPE .820[20.82] #6-32NC-2 THREAD 6.000[152.40] .141[3.58] .370[9.39] .500[12.70] 1.069[27.15] .286[7.26] 1.190[30.22] .490[22.86] .075[1.905] IEC APPROVED CONSTRUCTION (TIG ONLY) 55˚ 4 plcs* .650[16.51] .957[24.30] 1.224[31.08] 1L 1.224[31.08] .650[16.51] .957[24.30] 1.224[31.08] 1C TIL,TIG,TIH,TII .312[7.92] .300[7.62] .650[16.51] .957[24.30] 1.024[26.00] 2L TIG, TII 1.224[31.08] TIL,TIG,TIH,TII .250[6.35] 6S TIG .630[16.00] .430[10.90] .650[16.51] .957[24.30] 1S TIL,TIG,TIH,TII 1.224[31.08] 1F * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. .650[16.51] TIL,TIG,TIH,TII .957[24.30] WIRE LEAD MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. Switch should be mounted at 90˚ for maximum water shedding (45˚ to 90˚ acceptable) .830[21.08] 1.035[26.28] .996[25.30] 1.224[31.08] 7S TIG .880[22.40] () Indicates momentary function. .880[22.4] 7N 7P TIG SPECIAL CIRCUITS FOR TIPPETTE ROCKER SWITCHES Circuit Position 1 Position 2 Progressive Two Circuit GG BOTH CIRCUITS ON ONE CIRCUIT ON GG BOTH CIRCUITS (ON) ONE CIRCUIT ON Single Pole Triple Throw GE ON ON Two Circuit GH CIRCUIT 1 ON BOTH CIRCUITS ON GP CIRCUIT 2 ON CIRCUIT 1 ON Reversing Double Pole Double Throw GO ON OFF GX ON NONE .187[4.75] .187[4.75] .350[8.89] SCREW (ASSEMBLED) .680[17.27] 1.450[36.83] 1.224[31.08] .187 TAB (Q.C.) TIG Position 3 OFF OFF ON CIRCUIT 2 ON OFF ON ON Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com PRINTED CIRCUIT Tippette Mounting Bracket Styles - Dimensional Specifications | 5 Dimensional Specifications: in. [mm] 1.190[30.22] # 6-32NC-2 TAP .680[17.27] .156[3.96] DIA .070[1.77] .830[21.08] .158[4.01] DIA TAPPED HOLE CLEARANCE HOLE TIG TIL 1.940[49.27] (Nylon Snap-in Brackets) Panel Thickness: .030 min. - .250 max. * Angled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. TIH TII 1.940[49.27] .078[1.98] MOUNTING HOLE Standard with C Bracket Standard with A & B Brackets 1.892[48.06] .078[1.98] 1.960[49.78] .078[1.98] .078[1.98] 1.625[41.27] 1.625[41.27] 1.625[41.27] TIL TIG TII A 1.625[41.27] A A 2.093[53.16] A TIH 2.090[53.08] .156[3.96] .156[3.96] 1.625[41.27] 1.625[41.27] B B TIL TII, TIG 1.875[47.62] .437[11.09] 55˚ 4 plcs* 1.450[36.83] 1.940[49.27] 2.062[52.37] .426[10.82] .426[10.82] 1.625[41.27] CX 1.625[41.27] 1.625[41.27] TIG TIH, TII C TIL C 1.950[49.53] 1.700[43.18] 1.350[34.29] GCP GLOSS FINISH .960[24.38] 1.625[41.27] 1.570[39.88] H GMP MATTE FINISH HOLE PLUG FOR TIL, TIG, TIH & TII .430[10.92] TIG NARROW WIDE 1.750[44.45] 1.570[39.87] 1.126[28.60] .900[22.86] FN TIL, TIG, TIH, TII METAL, SNAP-IN MARINE / STD / WATERSHEDDING 1.700[43.18] .960[24.38] FW TIL, TIG, TIH, TII METAL, SNAP-IN MBL, NBL, WBL TIG BLACK NYLON, SNAP-IN Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | Notes Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Sales Representatives, Distributors & Company Profile | 7 Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. CANADA EUROPE USA MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_11_2016