FKC03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH 24 PIN DIP AND SMD PACKAGE • UL60950-1, EN60950-1 , & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency Maximum Capacitor Load VDC 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 3.3 5 12 15 ±5 ±12 ±15 mA 500 500 250 200 ±250 ±125 ±100 500 500 250 200 ±250 ±125 ±100 500 500 250 200 ±250 ±125 ±100 mA 10 10 10 15 15 15 20 10 10 15 15 15 20 20 5 10 10 10 10 10 10 % 75 76 80 81 78 80 82 72 74 78 78 74 77 77 74 74 79 78 73 79 77 µF 2200 1000 220 150 ±470 ±100 ±68 2200 1000 220 150 ±470 ±100 ±68 2200 1000 220 150 ±470 ±100 ±68 FKC03-12S33 FKC03-12S05 FKC03-12S12 FKC03-12S15 FKC03-12D05 FKC03-12D12 FKC03-12D15 FKC03-24S33 FKC03-24S05 FKC03-24S12 FKC03-24S15 FKC03-24D05 FKC03-24D12 FKC03-24D15 FKC03-48S33 FKC03-48S05 FKC03-48S12 FKC03-48S15 FKC03-48D05 FKC03-48D12 FKC03-48D15 PART NUMBER STRUCTURE FKC03 - 48 Series Name Input Voltage (VDC) 12: 9~18 24:18~36 48:36~75 S Output Quantity S:Single D: Dual 1 05 Output Voltage (VDC) 33: 3.3 05: 5 12:12 15:15 ± ± ± 05: 5 12: 12 15: 15 M1 SMD Operating Temp. Option Mounting Type Option : Standard type -25~+85 With derating M1: -40~+85 Without derating M2: -40~+85 With derating : DIP type SMD: SMD type ℃ ℃ ℃ www.PDUKE.com 2014/04/30 FKC03 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time Input surge voltage 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up 12Vin(nom) 24Vin(nom) 48Vin(nom) Constant resistive load 100 ms, max. Min. Typ. Max. 9 18 36 12 24 48 18 36 75 350 36 50 100 Input reflected ripple current Input filter Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Over load protection Short circuit protection Conditions Low Line to High Line at Full Load No Load to Full Load Case material Base material Potting material Weight MTBF 1 minute Conditions DIP type Typ. Max. Unit +1.0 +0.2 +0.2 +1.0 +5.0 % % 1600 1600 1600 1000 1 MIL-HDBK-217F Conditions Standard M1 Version M2 Version Min. With derating Without derating With deraitng ℃ Typ. Max. Unit VDC GΩ pF 300 kHz UL60950-1 EN60950-1 IEC60950-1 Nickel-coated copper Non-conductive black plastic Epoxy (UL94 V-0) 18g (0.62oz) 7.289 x 106 hrs 300 330 Typ. -25 -40 -40 -55 Natural convection % % mVp-p -0.02 +0.02 %/ 200 µs 180 % Continuous, automatics recovery 270 Max. Unit +85 +85 +85 100 +125 ℃ ℃ ℃ ℃/W 20 MIL-STD-810F MIL-STD-810F 5% to 95% RH EMC SPECIFICATIONS Parameter 2 mAp-p -1.0 -0.2 -0.2 -1.0 -5.0 Min. Input to Output Input (Output) to Case Input to Output Input (Output) to Case 500VDC Operating ambient temperature(1) EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity VDC 50 25% load step change % of Iout rated ENVIRONMENTAL SPECIFICATIONS Parameter Maximum case temperature Storage temperature range Thermal impedance Thermal shock Vibration Relative humidity Min. Single Dual Dual Asymmetrical load 25%/100% FL 20MHz bandwidth SMD type Isolation resistance Isolation capacitance Switching frequency Safety approvals ms Pi type GENERAL SPECIFICATIONS Parameter Isolation voltage VDC 20 OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation Load regulation Unit Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s www.PDUKE.com Level Class A，Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A 2014/04/30 FKC03 Note: 1. 2. 3. It’s higher efficiency for M1 version. Therefore, it can be operated in a more extensive temperature range than standard and M2 version. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter Power Mate suggests: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE FKC03-48S05 Derating Curve FKC03-48S05-M1 Derating Curve FKC03-48S05 Efficiency vs. Input Voltage FKC03-48S05 Efficiency vs. Output Load MECHANICAL DRAWING DIP type PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11 SMD type NC NC NC PIN CONNECTION PIN SINGLE 2 -Vin 3 -Vin 9 10 11 Others NC NC NC NC DUAL -Vin -Vin PIN 23 22 SINGLE +Vin +Vin DUAL +Vin +Vin Common NC -Vout 16 15 14 -Vout NC +Vout Common NC +Vout DUAL -Vin -Vin PIN 23 22 SINGLE +Vin +Vin DUAL +Vin +Vin Common NC -Vout NC 16 15 14 -Vout NC +Vout Common NC +Vout 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2014/04/30