Vishay DSCC05007 Surface mount multilayer ceramic chip capacitors dscc qualified type 05007 Datasheet

DSCC 05007
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 05007
FEATURES
• US defense supply center approved
• Federal stock control number,
CAGE CODE SHV71
• Case size 1206
• Stable BP, BR and BX dielectrics
• Excellent aging characteristics
• Tin/lead termination code “Z” and “U”
• Lead (Pb)-free termination code “M”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Compliant to RoHS Directive 2011/65/EU
• Halogen-free according to IEC 61249-2-21 definition
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
APPLICATIONS
•
•
•
•
•
•
Avionic application
Sonar applications
Satellite systems
Missiles applications
Geographical information systems
Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range:
BP: 0.5 pF to 10 nF
BR: 820 pF to 680 nF
BX: 820 pF to 470 nF
Voltage Range: 16 VDC to 200 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
with zero (0) VDC applied
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
with 100 % rated VDC applied
BR: ± 15 % from - 55 °C to + 125 °C
with zero (0) VDC applied
BR: + 15 %, - 40 % from - 55 °C to + 125 °C
with 100 % rated VDC applied
BX: ± 15 % from - 55 °C to + 125 °C
with zero (0) VDC applied
BX: + 15 %, - 25 % from - 55 °C to + 125 °C
with 100 % rated VDC applied
Revision: 28-Feb-12
Dissipation Factor (DF):
BP:
0.15 % max. at 1.0 VRMS and 1 MHz for values  1000 pF
0.15 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF
BR and BX:
 25 V: 3.5 % max. at 1.0 VRMS and 1 kHz
 50 V: 2.5 % max. at 1.0 VRMS and 1 kHz
Aging Rate:
BP: 0 % maximum per decade
BR, BX: 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
At + 125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
Performed per method 103 of EIA-198-2-E.
Applied test voltages
 200 VDC-rated: 250 % of rated voltage
Document Number: 45049
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
CASE
MINIMUM
MAXIMUM
BP
1206
200
0.5 pF
10 nF
BR
1206
100
820 pF
680 nF
BX
1206
100
820 pF
470 nF
Note
• Detail ratings see selection chart
ORDERING INFORMATION
05007-
BP
101
B
J
X
-
T
DSCC
NUMBER
DIELECTRIC
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C TESTING
OPTION (2)
PACKAGING
Case code
1206
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
1R8 = 1.8 pF
101 = 100 pF
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = 200 V
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C, D < 10 pF (BP)
F, G, J, K, M
 10 pF (BP)
J, K, M (BR, BX)
M = Silver
Palladium
Z = Ni barrier
with tin/lead
plate min. 4 %
lead
U (2) =
hot solder
dipped
(min. 4 % lead)
C = Full group C
L = 2000 h life
test only
M = 1000 h life
test only
H = Low voltage
humidity test only
- = No group C
testing
T = 7" reel/plastic tape
J = 7" reel (low quantity)
R = 11 1/4" reel/plastic tape
B = Bulk
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) “U” termination part number code for DSCC product length, width and thickness dimensions positive tolerances (including bandwidth) above
are allowed to increase by the following amounts: Length 0.025" (0.64 mm), width/thickness 0.015" (0.38 mm)
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
05007-
TERMINATION PAD
(P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0.125 ± 0.008
(3.18 ± 0.20)
0.062 ± 0.008
(1.57 ± 0.20)
0.051
(1.30)
0.010
(0.25)
0.030
(0.76)
Note
• Metric equivalents are given for general information only
Revision: 28-Feb-12
Document Number: 45049
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
05007
CASE CODE
1206
VOLTAGE (VDC)
16
25
50
100
200
10
16
25
VOLTAGE CODE
Y
Z
A
B
C
X
Y
Z
CAP. CODE
CAP.
0R5
0.5 pF
•
•
•
•
•
1R0
1.0 pF
•
•
•
+
•
1R2
1.2 pF
•
•
•
+
•
1R5
1.5 pF
•
•
•
+
•
1R8
1.8 pF
•
•
•
+
•
2R2
2.2 pF
•
•
•
+
•
2R7
2.7 pF
•
•
•
+
•
3R3
3.3 pF
•
•
•
+
•
3R9
3.9 pF
•
•
•
+
•
4R7
4.7 pF
•
•
•
+
•
5R6
5.6 pF
•
•
•
+
•
6R8
6.8 pF
•
•
•
+
•
8R2
8.2 pF
•
•
•
+
•
100
10 pF
•
•
•
+
•
120
12 pF
•
•
•
+
•
150
15 pF
•
•
•
+
•
180
18 pF
•
•
•
+
•
220
22 pF
•
•
•
+
•
270
27 pF
•
•
•
+
•
330
33 pF
•
•
•
+
•
390
39 pF
•
•
•
+
•
470
47 pF
•
•
•
+
•
560
56 pF
•
•
•
+
•
680
68 pF
•
•
•
+
•
820
82 pF
•
•
•
+
•
101
100 pF
•
•
•
+
•
121
120 pF
•
•
•
+
•
151
150 pF
•
•
•
+
•
181
180 pF
•
•
•
+
•
221
220 pF
•
•
•
+
•
271
270 pF
•
•
•
+
•
331
330 pF
•
•
•
+
•
391
390 pF
•
•
•
+
•
471
470 pF
•
•
•
+
•
561
560 pF
•
•
•
+
•
681
680 pF
•
•
•
+
•
821
820 pF
•
•
•
+
•
•
•
•
102
1.0 nF
•
•
•
+
•
•
•
•
122
1.2 nF
•
•
+
•
•
•
•
•
152
1.5 nF
•
•
+
•
•
•
•
•
182
1.8 nF
•
•
+
•
•
•
•
•
222
2.2 nF
•
•
+
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
Note
+ Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing
Revision: 28-Feb-12
BX
50
A
100
B
10
X
16
Y
25
Z
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
Document Number: 45049
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
05007
CASE CODE
1206
VOLTAGE (VDC)
16
25
50
100
200
10
16
25
VOLTAGE CODE
Y
Z
A
B
C
X
Y
Z
CAP. CODE
CAP.
103
10 nF
•
•
•
•
•
•
123
12 nF
•
•
•
153
15 nF
•
•
•
183
18 nF
•
•
•
223
22 nF
•
•
•
273
27 nF
•
•
•
333
33 nF
•
•
•
393
39 nF
•
•
•
473
47 nF
•
•
•
563
56 nF
•
•
•
683
68 nF
•
•
•
823
82 nF
•
•
•
104
100 nF
•
•
•
124
120 nF
•
•
•
154
150 nF
•
•
•
184
180 nF
•
•
•
204
200 nF
•
•
•
224
220 nF
•
•
•
254
250 nF
•
•
•
274
270 nF
•
•
•
334
330 nF
•
•
•
394
390 nF
•
•
•
474
470 nF
•
•
•
564
560 nF
•
•
684
680 nF
•
•
824
820 nF
105
1.0 μF
Note
+ Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing
BX
50
A
100
B
10
X
16
Y
25
Z
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
•
•
•
•
•
+
+
+
•
•
•
DSCC PACKAGING QUANTITIES (1)
CASE CODE
TAPE SIZE
1206
8 mm
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
BULK
PACKAGING CODE
PACKAGING CODE
VIAL PACKAGING CODE
“T”
“J”
“R”
“B”
3000
1000
10 000
100
Note
(1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 28-Feb-12
Document Number: 45049
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Similar pages