SMT Power Inductor HMU1356L Type Features RoHS compliant. Low profile, SMD type. High current. Magnetic shielded. High energy storage and low DCR. Provided with embossed carrier tape packing. Ideal for power source circuits, DC-DC converter, DC-AC inverters inductor applications. In addition to the standard versions shown here, customized inductors are available to meet your exact requirements. Mechanical Dimension : RECOMMENDED PAD PATTERNS B H C D H 8.4 3.8 10.0 3.0 F A E G ¡Ó 13.5 Electrical Characteristics : 25OC , 100KHz, 1V L1 (uH) 1. 2. 3. 4. UNIT : mm/inch A = 12.60 0.4 / 0.496 0.016 B = 12.70 0.3 / 0.500 0.012 C = 5.60 / 0.220 Max. D = 8.95 / 0.352 E = 2.50 / 0.098 F = 9.50 / 0.374 G = 4.30 / 0.169 H = 1.90 / 0.075 (m DCR ) MAX I sat 2 (Adc) I rms 3 (Adc) HMU1356L-0R6 0.6 1.5 23.0 19.5 HMU1356L-1R5 1.5 2.2 14.0 18.0 HMU1356L-2R5 2.5 3.4 10.0 15.5 HMU1356L-4R0 4.0 5.4 8.3 12.5 HMU1356L-6R0 6.0 8.0 6.7 9.9 HMU1356L-8R2 8.2 11.4 5.8 8.2 HMU1356L-100 10.0 13.5 5.0 7.6 Tolerance of inductance is 20%. Isat is the DC current which cause the inductance drop approximately 20% of is nominal inductance without current. Irms is the DC current which cause the surface temperature of the part increase less than 45OC. Operating temperature : -20OC to 105OC ( including self-temperature rise ). DELTA ELECTRONICS, INC. (TAOYUAN PLANT CPBG) 252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C. TEL: 886-3-3591968; FAX: 886-3-3591991 http://www.deltaww.com 136