POWER AVD85 Series 85 Watts Data Sheet Total Power: 85 Watts Input Voltage:36 - 75V # of Outputs: Single SPECIAL FEATURES 2:1 Wide input range Optimised for high density, small space applications Low ripple and noise Fixed switching frequency High efficiency High capacitive load capability Pre-bias start-up capability Basic insulation system Through hole or SMT termination Openframe structure with baseplate option Output over current protection Two year warranty Electrical Specifications Input Input range 36 - 75 Vdc Efficiency 91.5% @ 3.3 V; 93.5% @5 V; 92.5% @ 12 V Output Output voltage 3.3 V, 25 A, 91.5% efficiency 5 V, 17 A, 91% efficiency 12 V, 7 A, 92% efficiency Output voltage adjust 80% -110% of Vout Nom SAFETY Voltage tolerance +/-1.5% UL, cUL: UL60950 TUV/CE: IEC/EN60950 Line regulation 0.2% Load regulation Single output: 0.5% Noise/ripple 3.3 Vo: 120 mV Over voltage protection Over temperature protection Auto-restart Switching frequency 250 KHz Temperature coefficient ±0.02 /°C Isolation I/O isolation 1500 Vdc min. AVD85 Series Data Sheet Environmental Specifications Operating ambient temperature range -40 °C to +85 °C Storage temperature -55 °C to +125 °C Humidity 5% to 95% (non-condensing) MTBF 2 Million hours RoHS Compliant Pin Assignments Pin # Function 1 +V in 2 Enable 3 -V in 4 -V out 5 - Sense 6 Trim 7 +Sense 8 +V out Ordering Information Model number Input voltage Output voltage Power AVD85-48S3V3-6L 36 - 75 Vin 3.3 V @ 25 A 82.5 W AVD85-48S3V3TL 36 - 75 Vin 3.3 V @ 25 A 82.5 W AVD85-48S3V3B-6L 36 - 75 Vin 3.3 V @ 25 A 82.5 W AVD85-48S05-6L 36 - 75 Vin 5 V @ 17 A 85 W AVD85-48S05B-6L 36 - 75 Vin 5 V @ 17 A 85 W AVD85-48S05TL 36 - 75 Vin 5 V @ 17 A 85 W AVD85-48S12TL 36 - 75 Vin 12 V @ 7 A 84 W AVD85-48S12-6L 36 - 75 Vin 12 V @ 7 A 84 W AVD85-48S12B-6L 36 - 75 Vin 12 V @ 7 A 84 W Notes: Standard version is negative enable -6 = 3.8 mm pin length B = Baseplate version T = Surface mount, reel tape package L = RoHS 6 compliance P = Positive enable AVD85 Series Data Sheet Mechanical Drawings AVD85 5 6 7 1 8 28.00[1.102] 7.62[0.300] 6 7 1 8 SIDE VIEW 6-Ø1.8±0.1 12.7[0.50] 2-Ø2.3±0.1 L 2-Ø1.5±0.1 LOAD BOARD 0.3[0.12]MIN 2-Ø2.3±0.1 L 10.0[0.393] 5 2 28.00[1.102] SIDE VIEW 6-Ø1.8±0.1 4 3 0.3[0.12]MIN 2 22.90[0.902] 4 3 33[1.299] 15.24 [0.600] 22.90[0.902] 15.24 [0.600] 33[1.299] BOTTOM VIEW 15.24[0.600] 7.62[0.300] BOTTOM VIEW 15.24[0.600] AVD85/120-B LOAD BOARD 6-Ø1.0±0.1 6-Ø1.0±0.1 2-Ø1.5±0.1 TL (Surface Mount) 15.24 [0.600] 22.90[0.902] 33[1.299] 4 3 5 2 6 7 1 8 UNIT: mm[inch] TOLERANCE: X.Xmm±0.5mm[X.XX in.±0.02in.] X.XXmm±0.25mm[X.XXX in.±0.01in.] 28.00[1.102] Notes: 2-Ø2.0±0.1 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Label and logo appearance may vary from what is shown on mechanical drawings. 0.3[0.12]MIN 10.0[0.393] SIDE VIEW 6-Ø1.5±0.1 BOTTOM VIEW: pin on upside 15.24[0.600] 7.62[0.300] BOTTOM VIEW LOAD BOARD WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] AVD85 Series-DS 14Oct2016