MC74LCX08 Low−Voltage CMOS Quad 2−Input AND Gate With 5 V−Tolerant Inputs The MC74LCX08 is a high performance, quad 2−input AND gate operating from a 2.3 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows MC74LCX08 inputs to be safely driven from 5.0 V devices. Current drive capability is 24 mA at the outputs. http://onsemi.com MARKING DIAGRAMS 14 14 1 Features • • • • • • SOIC−14 D SUFFIX CASE 751A LCX08 AWLYWW 1 Designed for 2.3 V to 3.6 V VCC Operation 5.0 V Tolerant Inputs − Interface Capability With 5.0 V TTL Logic LVTTL Compatible LVCMOS Compatible 14 24 mA Balanced Output Sink and Source Capability 14 Near Zero Static Supply Current (10 A) Substantially Reduces System Power Requirements Latchup Performance Exceeds 500 mA 1 TSSOP−14 DT SUFFIX CASE 948G LCX 08 ALYW 1 • • ESD Performance: • Human Body Model >2000 V Machine Model >200 V Pb−Free Packages are Available* 14 14 1 SOEIAJ−14 M SUFFIX CASE 965 74LCX08 ALYW 1 A L, WL Y W, WW = = = = Assembly Location Wafer Lot Year Work Week ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 2005 May, 2005 − Rev. 6 1 Publication Order Number: MC74LCX08/D MC74LCX08 VCC 14 A2 B2 13 O2 12 A3 11 10 B3 9 A0 O3 B0 8 A1 B1 A2 B2 1 A0 2 3 B0 O0 4 A1 5 B1 6 O1 7 A3 GND B3 1 3 2 O0 4 6 5 O1 13 11 12 O2 10 8 9 Figure 1. Pinout: 14−Lead (Top View) O3 Figure 2. Logic Diagram PIN NAMES TRUTH TABLE Pins Function An, Bn Data Inputs On Outputs Inputs Outputs An Bn On L L L L H L H L L H H H H = High Voltage Level L = Low Voltage Level For ICC reasons, DO NOT FLOAT Inputs MAXIMUM RATINGS Symbol Parameter VCC DC Supply Voltage VI DC Input Voltage VO DC Output Voltage IIK Value Condition Unit −0.5 to +7.0 V −0.5 ≤ VI ≤ +7.0 V −0.5 ≤ VO ≤ VCC + 0.5 Output in HIGH or LOW State (Note 1) V DC Input Diode Current −50 VI < GND mA IOK DC Output Diode Current −50 VO < GND mA +50 VO > VCC mA IO DC Output Source/Sink Current ±50 mA ICC DC Supply Current Per Supply Pin ±100 mA IGND DC Ground Current Per Ground Pin ±100 mA TSTG Storage Temperature Range −65 to +150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. IO absolute maximum rating must be observed. http://onsemi.com 2 MC74LCX08 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Type Max Unit 2.0 1.5 2.5, 3.3 2.5, 3.3 3.6 3.6 V 0 5.5 V 0 VCC V VCC = 3.0 V − 3.6 V VCC = 2.7 V − 3.0 V VCC = 2.3 V − 2.7 V −24 −12 −8 mA VCC = 3.0 V − 3.6 V VCC = 2.7 V − 3.0 V VCC = 2.3 V − 2.7 V +24 +12 +8 mA −40 +85 °C 0 10 ns/V VCC Supply Voltage Operating Data Retention Only VI Input Voltage VO Output Voltage (HIGH or LOW State) (3−State) IOH HIGH Level Output Current IOL LOW Level Output Current TA Operating Free−Air Temperature t/V Input Transition Rise or Fall Rate, VIN from 0.8 V to 2.0 V, VCC = 3.0 V DC ELECTRICAL CHARACTERISTICS TA = −40°C to +85°C Symbol VIH VIL VOH VOL Characteristic HIGH Level Input Voltage (Note 2) LOW Level Input Voltage (Note 2) HIGH Level Output Voltage LOW Level Output Voltage Condition Min 2.3 V ≤ VCC ≤ 2.7 V 1.7 2.7 V ≤ VCC ≤ 3.6 V 2.0 Max V 2.3 V ≤ VCC ≤ 2.7 V 0.7 2.7 V ≤ VCC ≤ 3.6 V 0.8 2.3 V ≤ VCC ≤ 3.6 V; IOH = −100 A VCC − 0.2 VCC = 2.3 V; IOH = −8 mA 1.8 VCC = 2.7 V; IOH = −12 mA 2.2 VCC = 3.0 V; IOH = −18 mA 2.4 VCC = 3.0 V; IOH = −24 mA 2.2 Unit V V 2.3 V ≤ VCC ≤ 3.6 V; IOL = 100 A 0.2 VCC = 2.3 V; IOL = 8 mA 0.6 VCC = 2.7 V; IOL = 12 mA 0.4 VCC = 3.0 V; IOL = 16 mA 0.4 VCC = 3.0 V; IOL = 24 mA 0.55 V II Input Leakage Current 2.3 V ≤ VCC ≤ 3.6 V; 0 V ≤ VI ≤ 5.5 V ±5 A ICC Quiescent Supply Current 2.3 ≤ VCC ≤ 3.6 V; VI = GND or VCC 10 A 2.3 ≤ VCC ≤ 3.6 V; 3.6 ≤ VI or VO ≤ 5.5 V ±10 2.3 ≤ VCC ≤ 3.6 V; VIH = VCC − 0.6 V 500 ICC Increase in ICC per Input 2. These values of VI are used to test DC electrical characteristics only. http://onsemi.com 3 A MC74LCX08 AC CHARACTERISTICS tR = tF = 2.5 ns; RL = 500 Limits TA = −40°C to +85°C Symbol VCC = 3.3 V ± 0.3 V VCC = 2.7 V VCC = 2.5 V ± 0.2 V CL = 50 pF CL = 50 pF CL = 30 pF Parameter Waveform Min Max Min Max Min Max Unit tPLH Propagation Delay Time 1 1.5 5.5 1.5 6.2 1.5 6.6 ns tPHL Input to Output 1.5 5.5 1.5 6.2 1.5 6.6 tOSHL Output−to−Output Skew 1.0 tOSLH (Note 3) 1.0 ns 3. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH−to−LOW (tOSHL) or LOW−to−HIGH (tOSLH); parameter guaranteed by design. DYNAMIC SWITCHING CHARACTERISTICS TA = +25°C Symbol VOLP VOLV Characteristic Condition Min Typ Max Unit Dynamic LOW Peak Voltage VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V 0.8 V (Note 4) VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V 0.6 V Dynamic LOW Valley Voltage VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V −0.8 V (Note 4) VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V −0.6 V 4. Number of outputs defined as “n”. Measured with “n−1” outputs switching from HIGH−to−LOW or LOW−to−HIGH. The remaining output is measured in the LOW state. CAPACITIVE CHARACTERISTICS Symbol Condition Typical Unit CIN Input Capacitance Parameter VCC = 3.3 V, VI = 0 V or VCC 7 pF COUT Output Capacitance VCC = 3.3 V, VI = 0 V or VCC 8 pF CPD Power Dissipation Capacitance 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF ORDERING INFORMATION Package Shipping† MC74LCX08D SOIC−14 55 Units / Rail MC74LCX08DG SOIC−14 (Pb−Free) 55 Units / Rail MC74LCX08DR2 SOIC−14 2500 Tape & Reel MC74LCX08DR2G SOIC−14 (Pb−Free) 2500 Tape & Reel MC74LCX08DT TSSOP−14* 96 Units / Rail MC74LCX08DTG TSSOP−14* 96 Units / Rail MC74LCX08DTR2 TSSOP−14* 2500 Tape & Reel MC74LCX08DTR2G TSSOP−14* 2500 Tape & Reel MC74LCX08M SOEIAJ−14 50 Units / Rail MC74LCX08MEL SOEIAJ−14 2000 Tape & Reel MC74LCX08MELG SOEIAJ−14 (Pb−Free) 2000 Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. http://onsemi.com 4 MC74LCX08 Vcc Vmi An, Bn Vmi 0V tPHL tPLH VOH Vmo On Vmo VOL WAVEFORM 1 − PROPAGATION DELAYS tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Vcc Symbol 3.3 V + 0.3 V 2.7 V 2.5 V + 0.2 V Vmi 1.5 V 1.5 V Vcc/2 Vmo 1.5 V 1.5 V Vcc/2 Figure 3. AC Waveforms VCC PULSE GENERATOR DUT RT CL = CL = RL = RT = CL RL 50 pF at VCC = 3.3 + 0.3 V or equivalent (includes jig and probe capacitance) 30 pF at VCC = 2.5 + 0.2 V or equivalent (includes jig and probe capacitance) R1 = 500 or equivalent ZOUT of pulse generator (typically 50 ) Figure 4. Test Circuit http://onsemi.com 5 MC74LCX08 PACKAGE DIMENSIONS SOIC−14 D SUFFIX CASE 751A−03 ISSUE G −A− 14 8 −B− P 7 PL 0.25 (0.010) M B M 7 1 G F R X 45 C −T− D 14 PL 0.25 (0.010) SEATING PLANE M T B A S DIM A B C D F G J K M P R J M K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. S MILLIMETERS MIN MAX 8.55 8.75 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0 7 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0 7 0.228 0.244 0.010 0.019 TSSOP−14 DT SUFFIX CASE 948G−01 ISSUE A 14X K REF 0.10 (0.004) 0.15 (0.006) T U M T U V S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE −W−. S S N 2X 14 L/2 0.25 (0.010) 8 M B −U− L PIN 1 IDENT. F 7 1 0.15 (0.006) T U N S DETAIL E K A −V− ÉÉÉ ÇÇÇ ÇÇÇ ÉÉÉ K1 J J1 SECTION N−N −W− C 0.10 (0.004) −T− SEATING PLANE D G H DETAIL E http://onsemi.com 6 DIM A B C D F G H J J1 K K1 L M MILLIMETERS INCHES MIN MAX MIN MAX 4.90 5.10 0.193 0.200 4.30 4.50 0.169 0.177 −−− 1.20 −−− 0.047 0.05 0.15 0.002 0.006 0.50 0.75 0.020 0.030 0.65 BSC 0.026 BSC 0.50 0.60 0.020 0.024 0.09 0.20 0.004 0.008 0.09 0.16 0.004 0.006 0.19 0.30 0.007 0.012 0.19 0.25 0.007 0.010 6.40 BSC 0.252 BSC 0 8 0 8 MC74LCX08 PACKAGE DIMENSIONS SOEIAJ−14 M SUFFIX CASE 965−01 ISSUE O 14 LE 8 Q1 E HE L 7 1 M DETAIL P Z D VIEW P A e c DIM A A1 b c D E e HE L LE M Q1 Z A1 b 0.13 (0.005) M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS AND ARE MEASURED AT THE PARTING LINE. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 5. THE LEAD WIDTH DIMENSION (b) DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE LEAD WIDTH DIMENSION AT MAXIMUM MATERIAL CONDITION. DAMBAR CANNOT BE LOCATED ON THE LOWER RADIUS OR THE FOOT. MINIMUM SPACE BETWEEN PROTRUSIONS AND ADJACENT LEAD TO BE 0.46 ( 0.018). 0.10 (0.004) http://onsemi.com 7 MILLIMETERS MIN MAX −−− 2.05 0.05 0.20 0.35 0.50 0.18 0.27 9.90 10.50 5.10 5.45 1.27 BSC 7.40 8.20 0.50 0.85 1.10 1.50 10 0 0.70 0.90 −−− 1.42 INCHES MIN MAX −−− 0.081 0.002 0.008 0.014 0.020 0.007 0.011 0.390 0.413 0.201 0.215 0.050 BSC 0.291 0.323 0.020 0.033 0.043 0.059 10 0 0.028 0.035 −−− 0.056 MC74LCX08 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 8 For additional information, please contact your local Sales Representative. MC74LCX08/D