APD160 SCHOTTKY BARRIER RECTIFIER Product Summary VRRM (V) Features IO (A) VF (MAX) (V) IR (MAX) (mA) @ +25°C @ +25°C 0.68 0.5 • Low Forward Voltage: 0.68V @ +25°C • Very Small Conduction Losses • High Surge Capability • Surge Overload Rating to 35A Peak +125°C Operating Junction Temperature Description • 1A Total • Guard-Ring for Stress Protection The APD160 is a low voltage dual Schottky rectifier suited for switch • Pb-free Package is Available mode power supplies and other power converters. This device is • R-1 and DO-41 60 1 intended for use in medium voltage operation, and particularly, in high frequency circuits where low switching losses and low noise are required. • The APD160 is available in standard DO-214AC, DO-41 and R-1 Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Available in “Green” Packages: DO-214AC, R-1 and DO-41 Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) packages. Mechanical Data Applications • Case: DO-214AC, DO-41, R-1 • • Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Low Voltage High Frequency Inverters • DC-DC Converters • Free Wheeling • Moisture Sensitivity: Level 1 per J-STD-020 • Polarity Protection • Terminals: Finish - Matte Tin Annealed over Copper Leadframe. Solderable per MIL-STD-202, Method 208 • DO-41 Notes: Weight DO-41 – 0.33Grams (Approximately) DO-214AC – 0.062Grams (Approximately) R-1 – 0.2Grams (Approximately) R-1 DO-214AC 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. Pin Assignments (Top View) Cathode (Top View) Anode DO-41 / R-1 APD160 Document number: DS36972 Rev. 3 - 2 Cathode Anode DO-214AC 1 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Ordering Information (Note 4) Note 4:. Diodes IC's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Products with "G1" suffix are available in green packages. Pb Green Pb Package Temperature Range DO-41 -65 to +125°C APD160VD-E1 D160VD 1000/Bulk DO-41 -65 to +125°C APD160VD-G1 160VDG 1000/Bulk DO-41 -65 to +125°C APD160VDTR-E1 D160VD 2500/Ammo DO-41 -65 to +125°C APD160VDTR-G1 160VDG 2500/Ammo R-1 -65 to +125°C APD160VH-E1 D160VH 1000/Bulk R-1 -65 to +125°C APD160VH-G1 160VHG 1000/Bulk R-1 -65 to +125°C APD160VHTR-E1 D160VH 2500/Ammo R-1 -65 to +125°C APD160VHTR-G1 160VHG 2500/Ammo DO-214AC -65 to +125°C APD160VRTR-G1 160VRG 7500/Tape & Reel Green Pb Part Number Marking ID Packing Green Pb Green Green Marking Information (1) DO-214AC (Top View) YWWA XXXXXX APD160 Document number: DS36972 Rev. 3 - 2 First Line: Logo and Date Code Y: Year WW: Work Week of Molding A: Assembly House Code Second Line: Marking ID (See Ordering Information) 2 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Marking Information (Cont.) (2) DO-41 (Top View) YWWA XXXXXX First Line: Logo and Date Code Y: Year WW: Work Week of Molding A: Assembly House Code Second Line: Marking ID (See Ordering Information) (3) R-1 (Top View) XXXXXX APD160 Document number: DS36972 Rev. 3 - 2 First Line: Marking ID (See Ordering Information) 3 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Maximum Ratings (TA = +25oC, unless otherwise noted.) (Note 5) Characteristic Symbol Rating Unit VRRM 60 V Maximum DC Blocking Voltage VDC 60 V Maximum RMS Voltage VRMS 42 V Average Rectified Forward Current 0.375” (9.5mm) Lead Length IF(AV) 1.0 A Non-repetitive Peak Forward Surge Current 8.3ms Single Half Sine-wave on Rated Load IFSM 35 A TJ -65 to +125 °C TSTG -65 to +150 °C Maximum Repetitive Peak Reverse Voltage Operating Junction Temperature Range (Note 6) Storage Temperature Range Notes: 5. Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability. 6. The heat generated must be less than the thermal conductivity from Junction to Ambient: dPD/dTJ < 1/θJA. Thermal Characteristics (TA = +25oC, unless otherwise noted.) Characteristic Typical Thermal Resistance (Note 7) Note 7: Symbol Rating Unit DO-41 80 R-1 80 DO-214AC 100 RθJA °C/W Device mounted on heat sink, with minimum recommended pad layout per http://www.diodes.com Electrical Characteristics (TA = +25oC, unless otherwise noted.) Characteristic Symbol Min Typ Max Unit Test Condition Forward Voltage @ IF = 1.0A VF – 0.68 – V – – 0.5 – Reverse Current @ Rated VR (Note 8) IR – Note 8: TA = +25°C mA 10 – TA = +100°C Short duration pulse test used to minimize self-heating effect, Pulse Test: 300μs pulse width, 1.0% duty cycle. APD160 Document number: DS36972 Rev. 3 - 2 4 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Instantaneous Forward Current (A) IF(AV), Average Rectified Forward Current (A) 2.0 Note 7 1.5 1.0 0.5 10 1 0.1 0 +25 C 0 +125 C 0.01 0.0 0 20 40 60 80 100 120 140 0.0 160 0.2 o 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 TA, Ambient Temperaure ( C) Instantaneous Forward Voltage (V) Figure 1. Forward Current Derating Curve Figure 2. Typical Instantaneous Forward Characteristics 40 Instantaneous Reverse Current (μA) Peak Forward Surge Current (A) 10000 30 20 10 1 10 1000 100 10 1 0 +25 C 0 +125 C 0.1 100 0 Number of Cycle at 60Hz 10 20 30 40 50 60 70 80 90 100 Percent of Instantaneous Reverse Voltage ( %) Figure 3. Maximum Non-Repetitive Surge Current Figure 4. Typical Reverse Characteristics Junction Capacitance (pF) 400 91 10 1 10 40 60 Reverse Voltage (V) Figure 5. Typical Junction Capacitance APD160 Document number: DS36972 Rev. 3 - 2 5 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Package Outline Dimensions (All dimensions in mm(inch).) (1) Package Type: DO-41 25. 400(1.000) MIN 0. 700(0. 028) 0. 900(0. 035) DIA. Cathode line by marking 4. 200(0. 165) 5. 200(0. 205) 2. 000(0. 080) 2. 700(0. 107) DIA. 25. 400(1.000) MIN APD160 Document number: DS36972 Rev. 3 - 2 6 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Package Outline Dimensions (Cont. All dimensions in mm(inch).) (2) Package Type: R-1 APD160 Document number: DS36972 Rev. 3 - 2 7 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Package Outline Dimensions (Cont. All dimensions in mm(inch).) Package Type: DO-214AC APD160 Document number: DS36972 Rev. 3 - 2 2.400(0.094) 2.830(0.111) 1.250(0.049) 1.650(0.065) (3) 8 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 Suggested Pad Layout (1) Package Type: DO-214AC G Y X1 X Dimensions Value APD160 Document number: DS36972 Rev. 3 - 2 Y X1 G X (mm)/(inch) (mm)/(inch) (mm)/(inch) (mm)/(inch) 2.100/0.083 2.000/0.079 1.600/0.063 5.600/0.220 9 of 10 www.diodes.com July 2014 © Diodes Incorporated APD160 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com APD160 Document number: DS36972 Rev. 3 - 2 10 of 10 www.diodes.com July 2014 © Diodes Incorporated