IPT Series Bayonet Lock Connectors IPT 02 Y Rear Box Mount Square Flange Receptacle with Printed Circuit Board Terminations IPT 02 Y 18-11 S Z XX MIL-C-26482 Series l Type Mod Code Options See Table II 02 - Front Box Mount Square Flange Receptacle Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Connector Class Y - PCB Tails No Accessory Threads Contact Gender P - Pin S - Socket C 1.8 0.7 Shell Size and Insert Arrangements A L APPLICATION NOTES 1. Rear box mount square flange receptacle with PCB tails and no accessory threads. Printed circuit board terminations. Contact factory for custom tail lengths. 2. Connector Class “Y” – – Receptacle with PCB tails. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-64 www.glenair.com IPT Series Bayonet Lock Connectors IPT 02 Y Rear Box Mount Square Flange Receptacle with Printed Circuit Board Terminations TABLE I: DIMENSIONS Shell size 8 A +0 -0.2 C ±0.1 F Max. G ±0.4 H ±0.1 L Max. M ±0.12 6.2 1.6 11.40 20.6 15.10 19.5 3.04 10 6.2 1.6 14.55 23.8 18.25 19.5 3.04 12 6.2 1.6 17.75 26.2 20.60 19.5 3.04 14 6.2 1.6 20.90 28.6 23.00 19.5 3.04 16 6.2 1.6 24.10 31.0 24.60 19.5 3.04 18 6.2 1.6 27.25 33.3 27.00 19.5 3.04 20 7.5 2.4 30.45 36.5 29.35 24.5 3.04 22 7.5 2.4 33.60 39.7 31.75 24.5 3.04 24 7.5 2.4 36.80 42.9 34.90 25.5 3.73 TABLE I: DIMENSIONS (Continued from Above) Shell Size Y Y1 Y2 YS YL YM YK D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 D ±0.4 E ±0.2 8 8.0 3.6 7.4 3.2 7.8 4.8 5.8 3.2 10.9 6.0 12.4 7.2 8.9 7.1 10 8.0 3.6 7.4 3.2 7.8 4.8 5.8 3.2 10.9 6.0 12.4 7.2 8.9 7.1 12 8.0 3.6 7.4 3.2 7.8 4.8 5.8 3.2 10.9 6.0 12.4 7.2 8.9 7.1 14 8.0 3.6 7.4 3.2 7.8 4.8 5.8 3.2 10.9 6.0 12.4 7.2 8.9 7.1 16 8.0 3.6 7.4 3.2 7.8 4.8 5.8 3.2 10.9 6.0 12.4 7.2 8.9 7.1 18 8.0 3.6 7.4 3.2 7.8 4.8 5.8 3.2 10.9 6.0 12.4 7.2 8.9 7.1 20 7.8 3.6 7.6 3.2 - - 7.5 3.2 9.3 6.0 - - 8.1 7.1 22 7.8 3.6 7.6 3.2 - - 7.5 3.2 9.3 6.0 - - 8.1 7.1 24 6.7 3.6 6.5 3.2 - - 6.4 3.2 8.2 6.0 - - 8.1 7.1 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance © 2008 Glenair, Inc. -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good Very Good NO Very Good Very Good Good Very Good Very Good Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-65 www.glenair.com