Bright View Electronics LED TUBE 1200mm / T9 / G13 LED TUBE ■ DESCRIPTION - Solution for energy saving,CO2 reduction and environment protection - BV LED tube is made of high brightness LED with driver build in - Long lifetime(about to 50000Hrs) - Recyclable - Easy installation,direct replacement ■ FEATURES - End cap meets standard G13 specification Meets T9 (9/8 inches diameter) tube size Full range voltage (AC 90- 264V) Low power consumption and high optical intensity High power efficiency.(>0.8) Lead (Pb) free, and RoHS compliant ■ APPLICATIONS - General Lighting Tube Light Source Architectural Lighting Backlighting ■ PART NUMBER LIST P/N BVM-TG40NAD1 BVM-TG40NAC1 BVM-TG40NDC1 ■ DIMENSIONS Date：2009/08/14 Power (110Vac) 20 20 18 CCT Lens Cap base LED quantity Flux 5600K 5600K 5600K Diffused Clear Clear G13 G13 G13 120 120 100 1300 1600 1350 Unit：mm Page：1 of 3 Version-A Bright View Electronics LED TUBE 1200mm / T9 / G13 LED TUBE ■ TYPICAL ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25 ℃ BVM-TG40NAD1 PARAMETER Power dissipation SYMBOL 110VAC / 60Hz 220V / 60Hz UNIT Pd 20(Typ.) 22(Typ.) W Power Factor PF ≧0.7 ≧0.7 - Power Efficiency PE 0.8(Typ.) 0.8(Typ.) - Luminous flux ΦU 1300(Typ.) 1350(Typ.) lm E 270(Typ.) 300(Typ.) lx Luminous Efficacy η 65(Typ.) 61(Typ.) lm/W Color Temperature CCT 5600+/-500 °K Illuminance (@100cm) Input Voltage, Frequency Operating Temperature Range Storage Temperature Range Weight Vi 90~264; 50/60Hz Vac Top -30 ~ +50 ℃ Ts -30 ~ +65 485(Typ.) ℃ g - BVM-TG40NAC1 PARAMETER SYMBOL 110VAC / 60Hz 220V / 60Hz UNIT Power dissipation Pd 20(Typ.) 22(Typ.) W Power Factor PF ≧0.7 ≧0.7 - Power Efficiency PE 0.8(Typ.) 0.8(Typ.) - Luminous flux ΦU 1600(Typ.) 1700(Typ.) lm Illuminance (@100cm) E 330(Typ.) 370(Typ.) lx Luminous Efficacy η 80(Typ.) 77(Typ.) lm/W Color Temperature CCT 5600+/-500 °K Input Voltage, Frequency Operating Temperature Range Storage Temperature Range Weight Vi 90~264; 50/60Hz Vac Top -30 ~ +50 ℃ Ts -30 ~ +65 - 485(Typ.) ℃ g BVM-TG40NDC1 PARAMETER SYMBOL 110VAC / 60Hz 220V / 60Hz UNIT Power dissipation Pd 18(Typ.) 20(Typ.) W Power Factor PF ≧0.7 ≧0.7 - Power Efficiency PE 0.8(Typ.) 0.8(Typ.) - Luminous flux ΦU 1350(Typ.) 1400(Typ.) lm Illuminance (@100cm) E 300(Typ.) 350(Typ.) lx Luminous Efficacy η 75(Typ.) 70(Typ.) lm/W Color Temperature CCT 5600+/-500 °K Vi 90~264; 50/60Hz Vac Top -30 ~ +50 ℃ Ts - -30 ~ +65 485(Typ.) ℃ g Input Voltage, Frequency Operating Temperature Range Storage Temperature Range Weight Date：2009/08/14 Page：2 of 3 Version-A Bright View Electronics LED TUBE 1200mm / T9 / G13 LED TUBE ■ Packaging Each carton has 20 tubes. ■ CAUTIONS 1. Voltage A. Driver the product over the specified voltage rating (264VAC) will damage the product. B. Lower than 90VAC the product will not work normally. C. Use DC source the product may not work normally. 2. Installation A. For your safety please turn off the power before install the product. B. Remove the starter from the luminaires. Starter may cause the tube work abnormally. C. Remover the capacitor from the ballast. D. This tube is not designed for rapid and instant type ballast. Do not apply the lamp in these luminaires. 3. Storage & Handling A. The product should be storage in an environment with the relative humidity less than 90% RH (@30 degree C or less). B. Warranty will be VOID if disassemble the lamp. C. The priduct is not waterproof. Excess moisture may also damage the product. Date：2009/08/14 Page：3 of 3 Version-A