OAE, OAP, OAP3 Series C A L I B E R Lead-Free RoHS Compliant ECL and PECL Oscillator PART NUMBERING GUIDE Electronics Inc. Environmental/Mechanical Specifications on page F5 OAE 100 27 AA C - 30.000MHz Package OAE = 14 Pin Dip / ±5.2Vdc / ECL OAP = 14 Pin Dip / +5.0Vdc / PECL OAP3 = 14 Pin Dip / +3.3Vdc / PECL Pin One Connection Blank = No Connect C = Complimentary Output Inclusive Stability 100= +/-100ppm, 50= +/-50ppm, 25= +/-25ppm, 10= +/-10ppm @ 25°C / +/-20ppm @ 0-70°C Pin Configurationy See Table Below ECL = AA, AB, AC, AB PECL = A, B, C, E Operating Temperature Range Blank = 0°C to 70°C 27 = -20°C to 70°C (50ppm and 100ppm Only) 48 = -40°C to 85°C (50ppm and 100ppm Only) ELECTRICAL SPECIFICATIONS Revision: 1994-B Frequency Range 20.000MHz to 250.000MHz Operating Temperature Range Storage Temperature Range Supply Voltage 0°C to 70°C / -20°C to 70°C / -40°C to 85°C -55°C to 125°C ECL = ±5.2Vdc ±5% PECL = +5.0Vdc ±5% / +3.3Vdc ±5% 140mA Maximum Input Current Frequency Tolerance / Stability Inclusive of Operating Temperature Range, Supply Voltage and Load ±100ppm, ±50ppm, ±25ppm, ±10ppm/±20ppm (0° C to 70°C) Output Voltage Logic High (Voh) ECL Output -1.0Vdc Minimum / -0.7Vdc Maximum PECL Output 4.0Vdc Minimum / 4.5Vdc Maximum ECL Output -1.95Vdc Minimum / -1.6Vdc Maximum PECL Output 3.0Vdc Minimum / 3.42Vdc Maximum Rise Time / Fall Time 20% to 80% of Waveform 2nSeconds Maximum Duty Cycle @1.4Vdc w/TTL Load 50 ±10% (Standard), 50±5% (Optional) Load Drive Capability ECL Output / AA, AB, AM / AC PECL Output 50 Ohms into -2.0Vdc / 50 Ohms into +3.0Vdc 50 Ohms into +3.0Vdc Output Voltage Logic Low (Vol) Aging (@ 25°C) ±5ppm / year Maximum Start Up Time 20mSeconds Maximum ECL PIN CONFIGURATIONS AA AB AM Pin 1 Ground/ Case No Connect or Comp. Output No Connect or Comp. Output Pin 7 -5.2V -5.2V Case Ground Pin 8 ECL Output ECL Output ECL Output Pin 14 Ground Case Ground -5.2Vdc A C D E Pin 1 No Connect No Connect PECL Comp. Out PECL Comp. Out Pin 7 Vee (Case Ground) Vee Vee Vee (Case Ground) Pin 8 PECL Output PECL Output PECL Output PECL Output Vcc Vcc (Case Ground) Vcc Vcc Pin 14 MECHANICAL DIMENSIONS Marking Guide 7.620 13.2 0.9 ±.203 MAX MAX 20.8 MAX 15.240 14 1 ±0.203 8 7 0.457 MAX Insulated Standoffs (Glass) All Dimensions in mm. TEL 949-366-8700 CALIBER PART NUMBER FREQUENCY DATE CODE ±0.1 (X4) 5.08 14 Pin Full Size PECL 5.08 MIN FAX 949-366-8707 Marking Guide Line 1: Caliber Line 2: Complete Part Number Line 3: Frequency in MHz Line 4: Date Code (Year/Week) WEB http://www.caliberelectronics.com