IPT0808-xxF IP Semiconductor Co., Ltd. High current density due to double mesa technology; SIPOS and Glass Passivation. IPT0808-xx series are suitable for general purpose AC Switching. They can be used as an ON/OFF function In application such as static relays, heating regulation, Induction motor stating circuits… or for phase Control operation light dimmers, motor speed Controllers. IPT0808-xx series is 3 Quadrants triacs, This is specially recommended for use on inductive Loads. TO-220F MAIN FEATURES Symbol Value Unit IT(RMS) 8 A VDRM / VRRM 800 V VTM ≤ 1.55 V ABSOLUTE MAXIMUM RATINGS Parameter Storage Junction Temperature Range Operating Junction Temperature Range Symbol Value Unit Tstg Tj -40 to +150 -40 to +125 ℃ Repetitive Peak Off-state Voltage Repetitive Peak Reverse Voltage Tj = 25℃ VDRM VRRM 800 800 V Non Repetitive Peak Off-state Voltage Non Repetitive Peak Reverse Voltage Tj = 25℃ VDSM VRSM 900 900 V RMS on–state current (Full sine wave) Tc =95℃ IT(RMS) 8 A ITSM 80 84 A I²t 36 A²s dI / dt 50 A/us IGM 4 A PG(AV) 1 W Non repetitive surge peak on–state Current (full cycle, Tj = 25℃) I²t Value for fusing f = 60Hz t = 16.7ms f = 50 Hz t = 20ms tp = 10ms Critical Rate of rise of on-state current IG = 2xIGT, tr ≤ 100ns, f = 120Hz, Tj = 125 ℃ Peak gate current tp = 20us, Tj = 125 ℃ Average gate power dissipation Tj = 125 ℃ 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 1 IPT0808-xxF ELECTRICAL CHARACTERISTICS(Tj = 25 ℃ unless otherwise specified) IPT0808-xxF Symbol Test Condition Quadrant IGT VD = 12V RL = 33Ω VGT VGD VD=VDRM, RL=3.3KΩ, Tj = 125 ℃ Unit dV/dt 10 35 50 I – II – III MAX 1.3 V I – II – III MIN 0.2 V IG = 1.2 IGT 25 50 70 30 60 80 mA MAX mA IT = 500mA MAX 15 35 50 mA VD = 67% VDRM gate open Tj = 125 ℃ MIN 40 500 1000 V/us 5.4 - - 2.8 - - - 4.5 7.0 (dV/dt) c=0.1V/us Tj = 125 ℃ (dI/dt)c BE MAX II IH CE I – II – III I – III IL SE (dV/dt) c=10V/us Tj = 125 ℃ MIN Without snubber Tj = 125 ℃ A/ms STATIC CHARACTERISTICS Symbol Test Conditions Value(MAX) Unit VTM ITM = 17A, t p = 380uS Tj = 125 ℃ 1.55 V IDRM VD = VDRM Tj = 125 ℃ 5 uA IRRM VR = VRRM Tj = 125 ℃ 1 mA THERMAL RESISTANCES Symbol Parameter Value Unit Rth (j – c) Junction to case (AC) 1.6 ℃/W 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 2 IPT0808-xxF PACKAGE MECHANICAL DATA TO-220F Dimensions Ref Millimeters Min Typ Inches Max Min 4.7 0.169 0.83 0.029 Typ Max A 4.30 B 0.74 C 0.5 0.75 0.020 0.030 C2 2.4 2.7 0.094 0.106 C3 2.5 2.9 0.098 0.114 D 8.6 9.2 0.338 0.362 E 9.7 10.3 0.382 0.406 F 6.2 6.6 0.136 0.143 G 5 5.2 0.197 0.205 H 28.0 29.8 11.0 11.7 L1 L2 0.8 3.63 1.14 0.185 0.031 0.033 0.143 1.7 0.044 0.067 L3 3.2 0.126 V1 40º 40º 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 3 IPT0808-xxF IPT0808-xxF 4F, Cheong won B/D, 269 Hyoje-dong, Jongno-gu, Seoul, 110-480 Korea TEL : +82-70 - 7574 - 2839, Fax : +82-2-6280-6382, [email protected] 4