M3T-SSOP36B-450 Direct Dummy IC for 36-pin 0.8mm-pitch SSOP Dimensions Function This accessory tool connects the probe of an emulation pod and the target, or an MCU and the target. Its dimensions are the same as those of the MCU for the 36-pin 0.8mm-pitch SSOP (36P2R-A) package. It consists of parts (1) to (2) shown in the diagram below. Attaching Procedure This converter can be used during debugging and board-mounted evaluation in common. When debugging (1) Mount a socket on the foot pattern on the target. (2) On top of it, mount the M3T-SSOP36B-450 and a socket frame in that order. (3) Then connect the probe of the emulation pod, etc. to the connector provided at the top of the M3T-SSOP36B-450. During board-mounted evaluation Mount an MCU and a socket frame on a socket on the target in that order. ① denotes pin numbers on the M3T-SSOP36B-450. 1 denotes pin numbers of the top of a connector. Symbol Term Dimensions [mm] A Fitting height 4.2 b Pin width 0.3 D Package length 8.4 E Package width 15.0 e Interval in row of pins 0.8 HD Overall length 12.4 Foot Pattern Reference Dimensions See Appendix D "Reference Dimensional Drawings for SSOP Package Foot Pattern Made by Matsushita Electric Works, Ltd." [Ordering Information] See Appendix H "Ordering Information". * : Position of No. 1 pin *All brand names and product names are trademarks or registered trademarks of their respective companies.