GBPC15005W THRU GBPC1510W SINGLE PHASE 15.0 AMP GLASS PASSIVATED BRIDGE RECTIFIER Features GBPC-W · Glass passivated die construction · Low forward voltage drop · High current capability Mechanical Data · · · · MIL-STD-202, Method 208 Polarity: As Marked on Case Mounting Position: Any Marking: Type Number Lead Free: For RoHS / Lead Free Version 1.130(28.7) 1.114(28.3) .335(8.5) .295(7.5) .751(19.1) .673(17.1) · Case: GBPC-W, molded plastic · Terminals: Plated Leads Solderable per .043(1.10) .038(0.97) 1.08(27.5) min. · Plastic material-UL flammability 94V-0 .722(18.5) .705(17.9) 1.130(28.7) 1.114(28.3) · High surge current capability 8 No. 9) r o (4. e f * Hol w 193 m e a di scr dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ ambient temperature unless otherwise specified. Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. GBPC GBPC GBPC GBPC GBPC GBPC UNITS 15005W 1501W 1502W 1504W 1506W 1508W 1510W SYMBOL GBPC TYPE NUMBER Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V RRM VRWM RMS Reverse Voltage VRMS 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V VDC IO 15.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 300 A Forward Voltage per element @IF=7.5A VFM 1.1 V Peak Reverse Current At Rated DC Blocking Voltage @TA =25 ℃ @TA =125 ℃ IR 5.0 500 uA Typical Junction Capacitance per leg (Note 2) CJ 300 pF Typical Thermal Resistance per leg RθJL 2.2 ℃/W -55to+150 ℃ Average Rectified Output Current (Note 1)@TA =55℃ Operating and Storage Temperature Range TJ,TSTG 2 Note:1. Mounted on glass epoxy PC board with 1.3mm solder pad. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. version:01 1 of 2 www.dyelec.com IF, INSTANTANEOUS FORWARD CURRENT (A) Fig. 1 Output Current Derating Curve 20 15 10 5 0 100 50 TA, AMBIENT TEMPERATURE ( °C) Fig. 2 Typical Forward Characteristics (per leg) 20 2 0.2 0.02 0.4 TA= 25°C Pulse Width = 300µs 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 4 Typical Junction Capacitance Fig. 3 Maximum Peak Forward Surge Current (per leg) 400 350 300 250 200 150 100 50 0 TA = 25°C Single Half Sine-Wave Pulse Width = 8.3ms (JEDEC Method) 1 10 NUMBER OF CYCLES AT 60 Hz 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES IFSM, PEAK FORWARD SURGE CURRENT (A) I(AV), AVERAGE FORWARD RECTIFIED CURRENT (A) GBPC15005W THRU GBPC1510W 100 10 T A=25°C 1 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE version:01 2 of 2 www.dyelec.com