SMT inductors SIMID series, SIMID 2220-T Series/Type: B82422T Date: October 2008 %BUB4IFFU © EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS’ prior express consent is prohibited. SMT inductors, SIMID series B82442T SIMID 2220-T Size 2220 (EIA) or 5650 (IEC) Rated inductance 1 NH to 10000 NH Rated current 46 mA to 3510 mA Construction ■ Ferrite drum core ■ Laser-welded winding ■ Flame-retardant molding Features Temperature range up to 150 °C Very high current handling capability High L values Qualified to AEC-Q200 Suitable for lead-free reflow soldering as referenced in JEDEC J-STD 020C ■ RoHS-compatible ■ ■ ■ ■ ■ Applications ■ ■ ■ ■ ■ ■ Filtering of supply voltages, coupling, decoupling DC/DC converters/switch-mode power supplies Automotive electronics Telecommunications Consumer electronics Industrial electronics Terminals ■ Base material CuSn6 ■ Layer composition Ni, Sn (lead-free) ■ Electro-plated Marking ■ Marking on component: Manufacturer, letter "T", L value (in μH), tolerance of L value (coded), date of manufacture (YWWD) ■ Minimum data on reel: Manufacturer, ordering code, L value, quantity, date of packing Delivery mode and packing unit ■ 12-mm blister tape, wound on 330-mm ∅ reel ■ Packing unit: 1500 pcs./reel Please read Cautions and warnings and Important notes at the end of this document. 2 10/08 SMT inductors, SIMID series B82442T SIMID 2220-T Dimensional drawing and layout recommendation 3.5±0.11) A 0.7±0.2 1) B C D B 0.7 min.1) 5+0.3 0.15 max. IND0053-6 5.6+0.3 A B C D 4.5 2.0 4.0 8.0 5+0.3 Marking 1) Soldering area Dimensions in mm IND0918-C-E Taping and packing Reel 12±0.3 2±0.05 _0 12.4 +1.5 <_ 6.0 1.6±0.1 8±0.1 62±1.5 IND0350-S Direction of unreeling IND0564-H-E Dimensions in mm Please read Cautions and warnings and Important notes at the end of this document. 13±0.2 _2 330 +0 1.5+0.1 <_ 7.2 Component 18.4 max. 5.5±0.1 4±0.1 1.75±0.1 Blister tape 3 10/08 SMT inductors, SIMID series B82442T SIMID 2220-T Technical data and measuring conditions Rated inductance LR Measured with impedance analyzer Agilent 4294A at frequency fL, 0.1 V, 20 °C Q factor Qmin Measured with impedance analyzer Agilent 4294A at frequency fQ, 20 °C Rated temperature TR 85 °C Rated current IR Maximum permissible DC with temperature increase of ≤ 60 K at rated temperature Saturation current Isat Maximum permissible DC with inductance decrease ΔL/L0 ≤ 10%, 20 °C Self-resonance frequency fres,min Measured with network analyzer Agilent 8753D, 20 °C DC resistance Rmax Measured at 20 °C Solderability (lead-free) Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s Wetting of soldering area ≥ 90% (based on IEC 60068-2-58) Resistance to soldering heat 260 °C, 40 s (as referenced in JEDEC J-STD 020C) Climatic category 55/150/56 (to IEC 60068-1) Storage conditions Mounted: –55 °C … +150 °C Packaged: –25 °C … +40 °C, ≤ 75% RH Weight Approx. 0.4 g Please read Cautions and warnings and Important notes at the end of this document. 4 10/08 SMT inductors, SIMID series B82442T SIMID 2220-T Characteristics and ordering codes fL; fQ IR Isat Rmax fres,min MHz mA mA Ω MHz 15 7.96 3510 7330 0.025 111 B82442T1102M050 1.5 15 7.96 3020 5480 0.033 60 B82442T1152M050 2.2 15 7.96 2710 4820 0.038 46 B82442T1222M050 3.3 15 7.96 2460 4010 0.046 36 B82442T1332M050 4.7 15 7.96 1950 3450 0.073 30 B82442T1472M050 15 7.96 1680 2770 0.106 23 B82442T1682M050 15 2.52 1510 2280 0.132 19 B82442T1103K050 15 15 2.52 1260 1870 0.190 16 B82442T1153K050 22 15 2.52 1040 1590 0.238 13 B82442T1223K050 33 15 2.52 840 1380 0.360 11 B82442T1333K050 47 15 2.52 700 1120 0.519 8.0 B82442T1473K050 68 15 2.52 570 900 0.781 7.0 B82442T1683K050 100 20 0.796 510 760 0.99 6.1 B82442T1104K050 150 20 0.796 410 610 1.50 4.6 B82442T1154K050 220 20 0.796 330 500 2.21 3.9 B82442T1224K050 330 20 0.796 280 430 3.29 3.4 B82442T1334K050 470 20 0.796 240 350 4.73 2.6 B82442T1474K050 680 20 0.796 210 300 5.87 2.3 B82442T1684K050 1000 20 0.252 150 246 9.5 1.8 B82442T1105K050 1500 20 0.252 130 200 14.9 1.5 B82442T1155K050 2200 20 0.252 100 168 22.5 1.2 B82442T1225K050 3300 20 0.252 85 138 32.8 1.0 B82442T1335K050 4700 20 0.252 73 119 48.6 0.8 B82442T1475K050 6800 20 0.252 65 102 60.3 0.6 B82442T1685K050 10000 20 0.0796 46 81 0.5 B82442T1106K050 Tolerance LR Qmin μH 1.0 ±20% ^ M 6.8 10 ±10% ^ K 112 Closer tolerances and intermediate values on request. Higher currents possible at temperatures <TR on request. Sample kit available. Ordering code: B82442X002 For more information refer to chapter “Sample kits”. Please read Cautions and warnings and Important notes at the end of this document. 5 10/08 Ordering code SMT inductors, SIMID series B82442T SIMID 2220-T Impedance |Z| versus frequency f measured with impedance analyzer Agilent 4294A/E4991A, typical values at 20 °C IND0686-L 10 6 Ω Inductance L versus DC load current IDC measured with LCR meter Agilent 4285A, typical values at 20 °C IND0882-K 10 5 µH B82442T B82442T | Z | 10 5 L 10000 µH 10 4 10 4 1000 µH 10 3 10 3 100 µH 10 2 10 2 10000 µH 1000 µH 100 µH 10 µH 1 µH 10 1 10 0 10 10 5 10 6 10 7 10 10 8 Hz 10 9 f IND0685-F 50 I op IR 10000 µH 1000 µH 100 µH 40 10 0.2 10 6 _1 10 0 A 10 1 I DC IND0602-K 0.6 0.4 10 5 10 1.0 20 0 4 10 _2 0.8 10 µH 1 µH 30 10 1.2 B82442T Q _1 Current derating Iop/IR versus ambient temperature TA (rated temperature TR = 85 °C) Q factor versus frequency f measured with impedance analyzer Agilent 4294A/E4991A, typical values at 20 °C 60 1 µH 10 0 _1 10 4 10 µH 10 1 10 7 0 Hz 10 8 f 6 0 10/08 20 40 60 80 100 120 ˚C 150 TA Cautions and warnings ■ Please note the recommendations in our Inductors data book (latest edition) and in the data sheets. – Particular attention should be paid to the derating curves given there. – The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing. ■ If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation. ■ The following points must be observed if the components are potted in customer applications: – Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically. – It is necessary to check whether the potting material used attacks or destroys the wire insulation, plastics or glue. – The effect of the potting material can change the high-frequency behaviour of the components. ■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core. ■ Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer. Please read Cautions and warnings and Important notes at the end of this document. 7 10/08 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 8 03/09