POWER NTS500-M Series 500 Watts Medical Data Sheet Total Power: 200 - 500 Watts Input Voltage: 85 - 264 Vac 120 - 300 Vdc # of Outputs: Single SPECIAL FEATURES Active power factor correction IEC EN61000-3-2 compliance Remote sense Power fail and remote inhibit Single wire current sharing Built-in EMI filter Low output ripple 5 V standby 12 V fan output Overvoltage protection Overload protection Thermal overload protection DC power good Built in OR-ing diode/FET Optional fan cover (-CF suffix) Optional end fan cover (-CEF suffix) PMBus compliant RoHS compliant Digital I2C interface Two year warranty POE isolation on NTS508-M SAFETY TUV: cULus: CB: CE: 60601-1 60601-1 Certificate & report Mark (LVD) Electrical Specifications Input Input range 85 - 264 Vac (wide range) Frequency 47 - 63 Hz Inrush current 50 A max., cold start @ 25 °C Efficiency 85% typical at full load, nominal line EMI filter FCC Class B conducted and radiated; CISPR22 Class B conducted and radiated; EN55022 Class B conducted and radiated; VDE0878PT3 Class B conducted and radiated. Safety ground leakage current < 0.3 mA @ 50/60 Hz, 264 Vac input Output Maximum power 200 W for convection; 500 W with 30 CFM forced air Adjustment range ± 5% Standby output 5 V @ 1 A convection, 2 A forced air, regulated, ± 5% Fan output 12 V @ 1 A, -5 %, +7%, 0.5 A for -CF version Hold-up time 20 ms @ 500 W load, 115 VAC nominal line at factory voltage setting Overload protection Short circuit protection on all outputs. Case overload protected @ 115 - 130% above peak rating Overvoltage protection 20 - 35% above nominal output NTS500-M Series Data Sheet Logic Control Power failure TTL logic signal goes high 100 - 500 msec after main output. It goes low at least 4 msec before loss of regulation Remote on/off Requires an external contact closure to inhibit outputs DC OK TTL logic goes high after the output is in regulation. It goes low when there is loss of regulation. Remote sense Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected. Environmental Specifications Operating temperature 0° to 50 °C ambient derate each output as 2.5% per degree from 50° to 70 °C. Storage temperature -40 °C to +85 °C Electromagnetic susceptibility Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity Operating; non-condensing 10% to 90% RH Vibration Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 2 G peak 8 Hz to 500 Hz, operational Ordering Information Maximum Load Maximum Load Minimum Load with Convection with 30CFM Cooling Forced Air Peak Load1 Regulation2 Ripple P/P (PARD)3 41.7 A 47 A ± 2% 120 mV 8.3 A 20.8 A 23.4 A ± 2% 240 mV 4.2 A 10.4 A 11.7 A ± 2% 480 mV Model Number Output Voltage NTS503-M 12 V 0A 16.6 A NTS505-M 24 V 0A NTS508-M 48 V 0A 1. 2. 3. 4. 5. Peak current lasting < 30 seconds with a maximum 10% duty cycle. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 12 V fan output cannot be used above 50 °C with convection cooling. -CF suffix added to the model number indicates cover with top fan. -CEF suffix added to the model number indicates cover with end mounted fan cover and AC inlet 6. This product is a Component Power Supply and is only for inclusion by professional installers within other equipment and must not be operated as a standalone product. EMC compliance to appropriate standards must be verified at the system level. This product is for sale to OEMs and System Integrators, including through Distribution Channels. It is not intended for sale to End Users. NTS500-M Series Data Sheet Pin Assignments Pin Assignments Connector Connector CN1 SK7 1 5 6 10 PIN 1 Line PIN 3 Neutral PIN 5 Ground PIN 1 V1 SWP PIN 2 P1 PIN 1 5 V_I C PIN 2 Ground PIN 3 A2 PIN 4 A0 - Remote Sense PIN 5 SVCC2_OR PIN 3 + Remote Sense PIN 6 I2C_SDA PIN 4 5VSB (standby) PIN 7 I2C_SLC PIN 5 5VSB return PIN 8 A1 PIN 6 +12V PIN 9 N/C PIN 7 Common PIN 10 +12 V_RTN_CTRL PIN 8 Inhibit Notes: PIN 9 DC power good (DC OK) 1. Specifications subject to change without notice. PIN 10 Power Fail (POK) SK8 Adjustment Potentiometers PIN 1 +12 V Fan PIN 2 Common CN403 1 6 5 10 2 +V1 Output adjust Mating Connectors SK4,5,6 Molex 19141-0058 SK7 Control Molex 90142-0010 signals PINS: 90119-2110 Amp: 87977-3 PINS: 87309-8 *Landwin: 2580S1003 PINS: 2583T011R SK8 JST PHR-2 Pins: SPH-002T-PO.5S CN403 JST PHDR-10VS 2. All dimensions in inches (mm), tolerance is ± 0.2”. Pins: JST SPHD-002T-P0.5 L/P 3. Specifications are at factory settings *Landwin 2050 S1000 4. Mounting maximum insertion depth is 0.12”. 5. Warranty: 2 year 6. Weight: NTS50X-M - 1.66 lbs/0.75 kg NTS50X-M-CF - 2.00 lbs/0.9 kg NTS50X-M-CEF - 2.26 lbs/1.03 kg Pins: 2053T011P * Where available Artesyn Connector Kit #70-841-024 includes all of the above (Molex for SK7) NTS500-M Series Data Sheet Mechanical Drawing NTS500-M Series Data Sheet Mechanical Drawing - CEF option b a a b AIR FLOW DIRECTION 1.61" (40.9) 1.255" (31.9) 0.862" (21.9) 0.862" (21.9) 4.0" (101.6) 9.15" (232.3) a b b a 5.85" (148.6) 2.40" (61) 6.244" (158.6) a b a b a b 2.9" (73.6) 4.7" (119.6) 0.752" (19.1) 6.437" (63.5) a b 5.5" (139.7) #6-32 (8 places) M3 (8 places) WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. . www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] NTS500-M DS 21Mar2016