2 3 2 2 3 1 1 4 1 3 S 4 Anti-Parallel Parallel APT2X30D40J APT2X31D40J 7 22 OT 4 APT2X30D40J APT2X31D40J 400V 400V 30A 30A DUAL DIE ISOTOP® PACKAGE ULTRAFAST SOFT RECOVERY DUAL RECTIFIER DIODES PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Anti-Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular SOT-227 Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers MAXIMUM RATINGS Symbol VR Density • Low Leakage Current All Ratings: TC = 25°C unless otherwise specified. Characteristic / Test Conditions APT2X30/2X31D40J UNIT 400 Volts Maximum D.C. Reverse Voltage VRRM Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 105°C, Duty Cycle = 0.5) 30 RMS Forward Current 70 IF(RMS) IFSM TJ,TSTG TL Amps 320 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) -55 to 150 Operating and StorageTemperature Range °C 300 Lead Temperature: 0.063" from Case for 10 Sec. STATIC ELECTRICAL CHARACTERISTICS Characteristic / Test Conditions MIN TYP IRM 1.5 IF = 60A Maximum Forward Voltage Maximum Reverse Leakage Current UNIT 1.5 IF = 30A VF MAX Volts IF = 30A, TJ = 150°C 1.3 VR = VR Rated 250 VR = VR Rated, TJ = 125°C 500 µA CT Junction Capacitance, VR = 200V 52 pF LS Series Inductance (Lead to Lead 5mm from Base) 10 nH USA APT Website - http://www.advancedpower.com 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord 053-4003 Rev D Symbol APT2X30/2X31D40J DYNAMIC CHARACTERISTICS Symbol Characteristic MIN TYP MAX 65 trr1 Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C 45 trr2 Reverse Recovery Time TJ = 25°C 45 trr3 IF = 30A, diF /dt = -240A/µs, VR = 240V TJ = 100°C 70 tfr1 Forward Recovery Time TJ = 25°C 150 tfr2 IF = 30A, diF /dt = 240A/µs, VR = 240V TJ = 100°C 150 IRRM1 Reverse Recovery Current TJ = 25°C 6 10 IRRM2 IF = 30A, diF /dt = -240A/µs, VR = 240V TJ = 100°C 10 18 Qrr1 Recovery Charge TJ = 25°C 135 Qrr2 IF = 30A, diF /dt = -240A/µs, VR = 240V TJ = 100°C 350 Vfr1 Forward Recovery Voltage TJ = 25°C 3.2 Vfr2 IF = 30A, diF /dt = 240A/µs, VR = 240V TJ = 100°C 3.2 Rate of Fall of Recovery Current TJ = 25°C 500 IF = 30A, diF /dt = -240A/µs, VR = 240V (See Figure 10) TJ = 100°C 500 diM/dt UNIT ns Amps nC Volts A/µs THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC Junction-to-Case Thermal Resistance RθJA Junction-to-Ambient Thermal Resistance VIsolation WT Torque RMS Voltage (50-60 Hz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) MIN TYP MAX UNIT 0.90 °C/W 20 2500 Volts 1.03 oz 29.2 gm Package Weight 13.6 lb•in 1.5 N•m Maximum Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine) 1.0 D=0.5 0.2 0.1 0.1 0.05 0.05 0.02 0.01 0.01 SINGLE PULSE Note: PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.5 0.005 t1 053-4003 Rev D t2 Duty Factor D = t1/t2 Peak TJ = PDM x ZθJC + TC 0.001 10-5 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 10 APT2X30/2X31D40J 1600 Qrr, REVERSE RECOVERY CHARGE (nano-COULOMBS) 80 60 TJ = 150°C TJ = 25°C 40 TJ = 100°C TJ = -55°C 20 0 0 0.4 0.8 1.2 1.6 2.0 VF, ANODE-TO-CATHODE VOLTAGE (VOLTS) Figure 2, Forward Voltage Drop vs Forward Current 1200 60A 800 30A 400 15A 0 10 50 100 500 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 3, Reverse Recovery Charge vs Current Slew Rate 50 2.0 TJ = 100°C VR = 240V 60A 40 Kf, DYNAMIC PARAMETERS (NORMALIZED) IRRM, REVERSE RECOVERY CURRENT (AMPERES) TJ = 100°C VR = 240V 30 15A 30A 20 10 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 4, Reverse Recovery Current vs Current Slew Rate 1.6 Qrr trr 1.2 trr 0.8 IRRM Qrr 0.4 0.0 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 5, Dynamic Parameters vs Junction Temperature 100 -50 80 tfr, FORWARD RECOVERY TIME (nano-SECONDS) trr, REVERSE RECOVERY TIME (nano-SECONDS) 90 16 800 TJ = 100°C VR = 240V IF = 30A TJ = 100°C VR = 240V 60A 30A 15A 70 60 50 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 6, Reverse Recovery Time vs Current Slew Rate 12 600 Vfr 8 400 4 200 tfr Vfr, FORWARD RECOVERY VOLTAGE (VOLTS) IF, FORWARD CURRENT (AMPERES) 100 0 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 7, Forward Recovery Voltage/Time vs Current Slew Rate 500 100 50 10 0.01 0.05 0.1 Figure 8, Junction Capacitance vs Reverse Voltage 0.5 1 5 VR, REVERSE VOLTAGE (VOLTS) 10 50 100 200 053-4003 Rev D CJ, JUNCTION CAPACITANCE (pico-FARADS) 1000 APT2X30/2X31D40J Vr D.U.T. trr/Qrr Waveform 30µH PEARSON 411 CURRENT TRANSFORMER +15v diF /dt Adjust 0v -15v Figure 9, Diode Reverse Recovery Test Circuit and Waveforms 1 IF - Forward Conduction Current 2 diF /dt - Current Slew Rate, Rate of Forward Current Change Through Zero Crossing. 3 IRRM - Peak Reverse Recovery Current. 4 trr - Reverse Recovery Time Measured from Point of IF 1 4 6 Zero 5 3 Current Falling Through Zero to a Tangent Line { 6 diM/dt} Extrapolated Through Zero Defined by 0.75 and 0.50 IRRM. 0.5 IRRM 0.75 IRRM 2 5 Qrr - Area Under the Curve Defined by IRRM and trr. 6 diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr. Qrr = 1/2 (trr . IRRM) Figure 10, Diode Reverse Recovery Waveform and Definitions APT Reserves the right to change, without notice, the specifications and information contained herein. SOT-227 Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 1.95 (.077) 2.14 (.084) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) Anti-parallel Parallel APT2X30D40J APT2X31D40J Anode 2 Cathode 1 Cathode 2 Anode 2 053-4003 Rev D 38.0 (1.496) 38.2 (1.504) Dimensions in Millimeters and (Inches) ISOTOP® is a Registered Trademark of SGS Thomson. Cathode 2 Anode 1 Cathode 1 Anode 1