1 D Description Body Pin Insulation Washer Gasket Crimp Ring Material Brass Brass Teflon PH Bronze SI Rubber Brass 2 3 4 Finish Nickel Gold Teflon Gold Rubber Nickel D SIDE VIEW PIN H0.311 (7.90) C CRIMP RING Ø0.024 (0.60) Ø0.102 (2.60) 1/4-36UNF-2B THREADS Ø0.035 (0.90) 0.106 (2.70) C 0.276 (7.00) 0.339 (8.60) 0.197 (5.00) Ø0.154 (3.90) Ø0.049 (1.25) 0.577 (14.65) B B RECOMMENDED CABLE STRIPPING DIMENSIONS 0.098 (2.50) 0.039 (1.00) 0.217 (5.50) RG-174 Cable CONSMA007 ASSEMBLY INSTRUCTIONS 1. 2. 3. Solder the pin to the center conductor. Insert the pin, center conductor, and insulator into the body until the top of the pin is even with the body. Wrap the braid around the tail of the body and crimp the ring with a 0.137" hex crimp tool (or one labeled for use with RG-174 cable) A A Title Part No. Dimensions: 1 2 SMA MALE CABLE END CRIMP FOR RG174 CABLE CONSMA007 INCHES (mm) Revision: 1.0 Date: 6/2/2006 3 CONNECTOR CITY 159 ORT LANE MERLIN, OR 97532 PH (541)-471-6256 FAX (541)-471-6251 Sheet 1 of 1 4