Aries LP300 Programmers and shorting plug Datasheet

Series LP300 Programmers and
Shorting Plugs
FEATURES:
• Shorting plugs mate with any .300 [7.62] center DIP
socket to provide custom programming.
• Stacks on .100 [2.54] centers.
• Converts any socket into a DIP switch.
SPECIFICATIONS:
• Standard plug body material is Black UL94-V/0 4/6
Nylon.
• Pins are 3/4 hard Brass.
• Pin plating is 10 μ [.25μm] min. Gold per MIL-G-45204
over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290.
• Current rating=2 Amps.
• Operating temperature= -67° to 257°F [-55°C to 125°C]
ALL DIMENSIONS:
INCHES [MILLIMETERS]
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
ORDERING INFORMATION
All tolerances ± .005 [.13]
unless otherwise specified
Specify Part No. LP300
for LO-PRO®file plug
with Gold plating
LP300
(LO-PRO®file plug)
Bristol, PA USA
TEL: (215) 781-9956
FAX: (215) 781-9845
16003
REV. D
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
http://www.arieselec.com • [email protected]
Similar pages