Freescale Semiconductor Technical Data Document Number: MPC8641DECS01AD Rev. 0, 12/2008 MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series This document describes part-number-specific changes to recommended operating conditions and revised electrical specifications, as applicable, from those described in the general MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications (Document No. MPC8641DEC). Specifications provided in this document supersede those in the MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications, Rev. 1 or later, for the part numbers listed in Table A only. Specifications not addressed herein are unchanged. Because this document is frequently updated, refer to the website listed on the back page of this document or contact your Freescale sales office for the latest version. Note that headings and table numbers in this document are not consecutively numbered. They are intended to correspond to the heading or table affected in the general hardware specification. © Freescale Semiconductor, Inc., 2008. All rights reserved. Freescale Part Numbers Affected: MC8641DTHX1333JC MC8641DTHX1250HC MC8641DTHX1000NC MC8641DTHX1000GC MC8641THX1333JC MC8641THX1250HC MC8641THX1000NC MC8641THX1000GC MC8641DTVU1333JC MC8641DTVU1250HC MC8641DTVU1000NC MC8641DTVU1000GC MC8641TVU1333JC MC8641TVU1250HC MC8641TVU1000NC MC8641TVU1000GC General Parameters Part numbers addressed in this document are listed in Table A. Table A. Part Numbers Addressed by This Data Sheet Operating Conditions Freescale Part Number CPU Frequency (MHz) VDD_Coren Tj (°C) MC8641DTHX1333JC 1333 1.05 V ± 50 mV –40 to 105 MC8641DTHX1250HC 1250 1.05 V ± 50 mV MC8641DTHX1000NC 1000 0.95 V ± 50 mV MC8641DTHX1000GC 1000 1.05 V ± 50 mV MC8641THX1333JC 1333 1.05 V ± 50 mV MC8641THX1250HC 1250 1.05 V ± 50 mV MC8641THX1000NC 1000 0.95 V ± 50 mV MC8641THX1000GC 1000 1.05 V ± 50 mV MC8641DTVU1333JC 1333 1.05 V ± 50 mV MC8641DTVU1250HC 1250 1.05 V ± 50 mV MC8641DTVU1000NC 1000 0.95 V ± 50 mV MC8641DTVU1000GC 1000 1.05 V ± 50 mV MC8641TVU1333JC 1333 1.05 V ± 50 mV MC8641TVU1250HC 1250 1.05 V ± 50 mV MC8641TVU1000NC 1000 0.95 V ± 50 mV MC8641TVU1000GC 1000 1.05 V ± 50 mV 2 Significant Differences from Hardware Specification Modified JTAG AC timing; extended junction temperature range. General Parameters This section summarizes changes to the general parameters of the MPC8641 described in the MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications. • Modified JTAG AC timing — tJTDVKH (min) = 15 ns • Extended junction temperature range — TJ = –40 to 105 °C MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series, Rev. 0 2 Freescale Semiconductor General Parameters 2.1 Overall DC Electrical Characteristics 2.1.2 Recommended Operating Conditions Table 2 provides the recommended operating conditions for the MPC8641 part numbers described herein. Table 2. Recommended Operating Conditions Characteristic Symbol Recommended Value Unit Notes TJ –40 to 105 °C — Junction temperature range 11.2 JTAG AC Electrical Specifications Table 44 provides the JTAG AC timing specifications for the MPC8641 part numbers described herein. Table 44. JTAG AC Timing Specifications (Independent of SYSCLK) 1 Parameter Symbol 2 Min Max tJTDVKH tJTIVKH 15 0 — — Unit Notes ns Input setup times: Boundary-scan data TMS, TDI 4 Notes: 1. All outputs are measured from the midpoint voltage of the falling/rising edge of tTCLK to the midpoint of the signal in question. The output timings are measured at the pins. All output timings assume a purely resistive 50-Ω load (see Figure 32). Time-of-flight delays must be added for trace lengths, vias, and connectors in the system. 2.The symbols used for timing specifications herein follow the pattern of t(first two letters of functional block)(signal)(state) (reference)(state) for inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tJTDVKH symbolizes JTAG device timing (JT) with respect to the time data input signals (D) reaching the valid state (V) relative to the tJTG clock reference (K) going to the high (H) state or setup time. Also, tJTDXKH symbolizes JTAG timing (JT) with respect to the time data input signals (D) went invalid (X) relative to the tJTG clock reference (K) going to the high (H) state. Note that, in general, the clock reference symbol representation is based on three letters representing the clock of a particular functional. For rise and fall times, the latter convention is used with the appropriate letter: R (rise) or F (fall). 4. Non-JTAG signal input timing with respect to tTCLK. MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series, Rev. 0 Freescale Semiconductor 3 Ordering Information 21 Ordering Information 21.1 Part Numbers Fully Addressed by This Document Table 74 provides the ordering information for the MPC8641 parts described in this document. Table 74. Part Numbering Nomenclature MC nnnn x w xx nnnn x x Product Code Part Identifier Core Count Temp Package 1 Core Processor Frequency 2 (MHz) DDR speed (MHz) Product Revision Level MC 8641 HX = High-lead HCTE FC-CBGA Blank = Single Core Revision C = 2.1 T = –40 System Version Register 1000, 1250, 1333 J = 533 MHz to 105 °C Value for Rev C: H = 500 MHz VU = RoHS lead-free 0x8090_0021 - MPC8641 D = Dual HCTE FC-CBGA G = 400 MHz 0x8090_0121 - MPC8641D Core N = 500 MHz4 Notes: 1. See Section 16, “Package,” for more information on available package types. 2. Processor core frequencies supported by parts addressed by this specification only. Not all parts described in this specification support all core frequencies. Additionally, parts addressed by part number specifications may support other maximum core frequencies. 3. The P prefix in a Freescale part number designates a “Pilot Production Prototype” as defined by Freescale SOP 3-13. These parts have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written authorization from the customer must be on file in the applicable sales office acknowledging the qualification status and the fact that product changes may still occur while shipping pilot production prototypes. 4. Part Number MC8641xwxx1000NX is our low VDD_Coren device. VDD_Coren = 0.95 V and VDD_PLAT = 1.05 V. Document Revision History Table B provides a revision history for this hardware specification addendum. Table B. Document Revision History Rev. Number Date 0 12/2008 Substantive Change(s) Initial release. MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series, Rev. 0 4 Freescale Semiconductor Ordering Information THIS PAGE INTENTIONALLY LEFT BLANK MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series, Rev. 0 Freescale Semiconductor 5 Ordering Information THIS PAGE INTENTIONALLY LEFT BLANK MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series, Rev. 0 6 Freescale Semiconductor Ordering Information THIS PAGE INTENTIONALLY LEFT BLANK MPC8641 and MPC8641D Integrated Host Processor Hardware Specifications Addendum for the MC8641xTxxnnnnxC Series, Rev. 0 Freescale Semiconductor 7 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 [email protected] under its patent rights nor the rights of others. Freescale Semiconductor products are Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 [email protected] claims, costs, damages, and expenses, and reasonable attorney fees arising out of, For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800 441-2447 or +1-303-675-2140 Fax: +1-303-675-2150 LDCForFreescaleSemiconductor @hibbertgroup.com Document Number: MPC8641DECS01AD Rev. 0 12/2008 not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale are trademarks or registered trademarks of Freescale Semiconductor, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. © Freescale Semiconductor, Inc., 2008. All rights reserved.