IDT IDT54FCT273CTQB Fast cmos octal d flip-flop with master reset Datasheet

IDT54/74FCT273T/AT/CT
FAST CMOS
OCTAL D FLIP-FLOP
WITH MASTER RESET
Integrated Device Technology, Inc.
FEATURES:
DESCRIPTION:
•
•
•
•
The IDT54/74FCT273T/AT/CT are octal D flip-flops built
using an advanced dual metal CMOS technology. The IDT54/
74FCT273T/AT/CT have eight edge-triggered D-type flipflops with individual D inputs and O outputs. The common
buffered Clock (CP) and Master Reset ( ) inputs load and
reset (clear) all flip-flops simultaneously.
The register is fully edge-triggered. The state of each D
input, one set-up time before the LOW-to-HIGH clock
transition, is transferred to the corresponding flip-flop’s O
output.
All outputs will be forced LOW independently of Clock or
Data inputs by a LOW voltage level on the
input. The
device is useful for applications where the true output only is
required and the Clock and Master Reset are common to all
storage elements.
•
•
•
•
•
Std., A, and C speed grades
Low input and output leakage ≤1µA (max.)
CMOS power levels
True TTL input and output compatibility
– VOH = 3.3V (typ.)
– VOL = 0.3V (typ.)
High drive outputs (-15mA IOH, 48mA IOL)
Meets or exceeds JEDEC standard 18 specifications
Product available in Radiation Tolerant and Radiation
Enhanced versions
Military product compliant to MIL-STD-883, Class B
and DESC listed (dual marked)
Available in DIP, SOIC, QSOP, CERPACK and LCC
packages
MR
MR
FUNCTIONAL BLOCK DIAGRAM
D0
D1
D2
D3
D4
D5
D6
D7
CP
D
Q
D
CP
Q
D
CP
RD
Q
D
CP
RD
Q
D
CP
RD
Q
D
CP
RD
Q
D
CP
RD
Q
D
CP
RD
Q
CP
RD
RD
MR
O0
O1
O2
O3
O4
O5
O6
O7
2568 drw 03
2
3
19
O7
18
D7
17
D6
D1
4
O6
O5
O1
5
O2
6
14
D5
7
13
D4
D2
D3
O4
CP
O1
5
O2
6
P20-1
D20-1
SO20-2
SO20-8
&
E20-1
16
15
D2
7
D3
8
O3
GND
9
12
10
11
3
2
1
20 19
18
D7
17
D6
16
O6
15
O5
14
D5
L20-2
8
9 10 11 12 13
2568 drw 01
DIP/SOIC/QSOP/CERPACK
TOP VIEW
CP
O4
D4
4
VCC
O0
20
D0
D0
D1
INDEX
1
O3
GND
MR
O0
MR
VCC
O7
PIN CONFIGURATIONS
2568 drw 02
LCC
TOP VIEW
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
1995 Integrated Device Technology, Inc.
6.10
APRIL 1995
DSC-4209/3
1
IDT54/74FCT273T/AT/CT FAST CMOS
OCTAL D FLIP-FLOP WITH MASTER RESET
MILITARY AND COMMERCIAL TEMPERATURE RANGES
FUNCTION TABLE(1)
PIN DESCRIPTION
Pin Names
DN
Description
Data Inputs
MR
Master Reset (Active LOW)
CP
Clock Pulse Input (Active Rising Edge)
ON
Data Outputs
2568 tbl 01
ABSOLUTE MAXIMUM RATINGS(1)
Military
–0.5 to +7.0
Unit
V
–0.5 to
VCC +0.5
V
–55 to +125
°C
–65 to +135
°C
–65 to +150
°C
0.5
W
I OUT
–60 to +120
mA
–60 to +120
MR
DN
Outputs
ON
Reset (Clear)
L
X
X
L
Load "1"
H
↑
h
H
Load "0"
H
↑
I
L
NOTE:
2568 tbl 02
1. H = HIGH voltage level steady state
h = HIGH voltage level one set-up time prior to the LOW-to-HIGH clock
transition
L = LOW voltage level steady state
I = LOW voltage level one set-up time prior to the LOW-to-HIGH clock
transition
X = Don’t Care
↑ = LOW-to-HIGH Clock Transition
CAPACITANCE (TA = +25°C, f = 1.0MHz)
Symbol
Rating
Commercial
VTERM(2) Terminal Voltage
–0.5 to +7.0
with Respect to
GND
VTERM(3) Terminal Voltage
–0.5 to
with Respect to
VCC +0.5
GND
TA
Operating
0 to +70
Temperature
TBIAS
Temperature
–55 to +125
Under Bias
TSTG
Storage
–55 to +125
Temperature
PT
Power Dissipation
0.5
DC Output
Current
Operating Mode
Inputs
CP
Symbol
Parameter(1)
CIN
Input
Capacitance
COUT
Output
Capacitance
Conditions
VIN = 0V
Typ.
6
VOUT = 0V
8
Max. Unit
10
pF
12
NOTE:
1. This parameter is measured at characterization but not tested.
pF
2568 lnk 04
2568 lnk 03
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions
above those indicated in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions for
extended periods may affect reliability. No terminal voltage may exceed
VCC by +0.5V unless otherwise noted.
2. Input and VCC terminals only.
3. Outputs and I/O terminals only.
6.10
2
IDT54/74FCT273T/AT/CT FAST CMOS
OCTAL D FLIP-FLOP WITH MASTER RESET
MILITARY AND COMMERCIAL TEMPERATURE RANGES
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Following Conditions Apply Unless Otherwise Specified:
Commercial: TA = 0°C to +70°C, VCC = 5.0V ± 5%; Military: TA = –55°C to +125°C, VCC = 5.0V ± 10%
Parameter
Input HIGH Level
Test Conditions(1)
Guaranteed Logic HIGH Level
VIL
Input LOW Level
II H
Input HIGH Current (4)
II L
Input LOW Current (4)
Symbol
VIH
Current (4)
Min.
2.0
Typ.(2)
—
Max.
—
Guaranteed Logic LOW Level
—
—
0.8
V
VCC = Max.
VI = 2.7V
—
—
±1
µA
VCC = Max.
VI = 0.5V
—
—
±1
µA
—
—
±1
µA
II
Input HIGH
VIK
Clamp Diode Voltage
VCC = Min., IN = –18mA
IOS
Short Circuit Current
VCC = Max.(3) , VO = GND
VOH
Output HIGH Voltage
VCC = Min.
VIN = VIH or VIL
VOL
Output LOW Voltage
VH
Input Hysteresis
ICC
Quiescent Power Supply Current
VCC = Max., VI = VCC (Max.)
IOH = –6mA MIL.
IOH = –8mA COM'L.
IOH = –12mA MIL.
IOH = –15mA COM'L.
IOL = 32mA MIL.
IOL = 48mA COM'L.
VCC = Min.
VIN = VIH or VIL
—
VCC = Max.
VIN = GND or VCC
—
–0.7
–1.2
V
–60
–120
–225
mA
2.4
3.3
—
V
2.0
3.0
—
V
—
0.3
0.5
V
—
200
—
mV
—
0.01
1
mA
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Not more than one output should be shorted at one time. Duration of the short circuit test should not exceed one second.
4. The test parameter for this parameter is ±5µA at TA = -55°C.
6.10
Unit
V
2568 tbl 05
3
IDT54/74FCT273T/AT/CT FAST CMOS
OCTAL D FLIP-FLOP WITH MASTER RESET
MILITARY AND COMMERCIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS
Symbol
∆ICC
ICCD
IC
Parameter
Quiescent Power Supply Current
TTL Inputs HIGH
Dynamic Power Supply
Current(4)
Total Power Supply Current (6)
Test Conditions(1)
VCC = Max.
VIN = 3.4V(3)
VCC = Max.
Outputs Open
MR = VCC
One Input Toggling
50% Duty Cycle
VCC = Max.
Outputs Open
fCP= 10MHz
50% Duty Cycle
MR = VCC
One Bit Toggling
at fi = 5MHz
50% Duty Cycle
VCC = Max.
Outputs Open
fCP= 10MHz
50% Duty Cycle
MR = VCC
Eight Bits Toggling
at fi = 2.5MHz
50% Duty Cycle
Min.
Typ.(2)
Max.
Unit
—
0.5
2.0
mA
VIN = VCC
VIN = GND
—
0.15
0.25
mA/
MHz
VIN = VCC
VIN = GND
—
1.5
3.5
mA
VIN = 3.4V
VIN = GND
—
2.0
5.5
VIN = VCC
VIN = GND
—
3.8
7.3 5)
VIN = 3.4V
VIN = GND
—
6.0
16.3 (5)
NOTES:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V); all other inputs at VCC or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the ICC formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fiNi)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fi = Input Frequency
Ni = Number of Inputs at fi
All currents are in milliamps and all frequencies are in megahertz.
6.10
2568 tbl 06
4
IDT54/74FCT273T/AT/CT FAST CMOS
OCTAL D FLIP-FLOP WITH MASTER RESET
MILITARY AND COMMERCIAL TEMPERATURE RANGES
SWITCHING CHARACTERISTICS OVER OPERATING RANGE
IDT54/74FCT273T
Com'l.
Symbol
Parameter
tPLH
Propagation Delay
CP to ON
tPHL
tPHL
tSU
tH
tW
tW
tREM
Propagation Delay
MR to ON
Set-up Time HIGH or LOW
DN to CP
Hold Time HIGH or LOW DN
to CP
CP Pulse Width HIGH or
LOW
MR Pulse Width LOW
Recovery Time MR
to CP
Condition(1)
CL = 50pF
(2)
Min.
Mil.
(2)
Max. Min.
IDT54/74FCT273AT
Com'l.
(2)
Max. Min.
Mil.
(2)
IDT54/74FCT273CT
Com'l.
(2)
Max. Min.
Max. Min.
Mil.
Max. Min.
(2)
Max.
Unit
2.0 13.0
2.0 15.0
2.0
7.2
2.0
8.3
2.0
5.8
2.0
6.5
ns
2.0 13.0
2.0 15.0
2.0
7.2
2.0
8.3
2.0
6.1
2.0
6.8
ns
3.0
—
3.5
—
2.0
—
2.0
—
2.0
—
2.0
—
ns
2.0
—
2.0
—
1.5
—
1.5
—
1.5
—
1.5
—
ns
7.0
—
7.0
—
6.0
—
6.0
—
6.0
—
6.0
—
ns
7.0
—
7.0
—
6.0
—
6.0
—
6.0
—
6.0
—
ns
4.0
—
5.0
—
2.0
—
2.5
—
2.0
—
2.5
—
ns
RL = 500Ω
NOTES:
1. See test circuit and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
2568 tbl 07
6.10
5
IDT54/74FCT273T/AT/CT FAST CMOS
OCTAL D FLIP-FLOP WITH MASTER RESET
MILITARY AND COMMERCIAL TEMPERATURE RANGES
TEST CIRCUITS AND WAVEFORMS
TEST CIRCUITS FOR ALL OUTPUTS
SWITCH POSITION
V CC
7.0V
500Ω
Pulse
Generator
Switch
Open Drain
Disable Low
Closed
Enable Low
V OUT
VIN
Test
Open
All Other Tests
D.U.T.
50pF
RT
2568 lnk 08
DEFINITIONS:
CL= Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse
Generator.
500Ω
CL
2568 drw 04
SET-UP, HOLD AND RELEASE TIMES
DATA
INPUT
TIMING
INPUT
ASYNCHRONOUS CONTROL
PRESET
CLEAR
ETC.
SYNCHRONOUS CONTROL
PRESET
CLEAR
CLOCK ENABLE
ETC.
tH
tSU
tREM
tSU
PULSE WIDTH
3V
1.5V
0V
3V
1.5V
0V
LOW-HIGH-LOW
PULSE
1.5V
tW
3V
1.5V
0V
HIGH-LOW-HIGH
PULSE
1.5V
2568 drw 06
3V
1.5V
0V
tH
2568 drw 05
PROPAGATION DELAY
ENABLE AND DISABLE TIMES
ENABLE
SAME PHASE
INPUT TRANSITION
tPLH
tPHL
OUTPUT
tPLH
OPPOSITE PHASE
INPUT TRANSITION
tPHL
3V
1.5V
0V
VOH
1.5V
VOL
DISABLE
3V
CONTROL
INPUT
1.5V
OUTPUT
NORMALLY
LOW
3V
1.5V
0V
SWITCH
CLOSED
3.5V
1.5V
tPZH
OUTPUT
NORMALLY
HIGH
2568 drw 07
SWITCH
OPEN
0V
tPLZ
tPZL
3.5V
0.3V
VOL
tPHZ
0.3V
VOH
1.5V
0V
0V
2568 drw 08
NOTES:
1. Diagram shown for input Control Enable-LOW and input Control DisableHIGH
2. Pulse Generator for All Pulses: Rate ≤ 1.0MHz; tF ≤ 2.5ns; tR ≤ 2.5ns
6.10
6
IDT54/74FCT273T/AT/CT FAST CMOS
OCTAL D FLIP-FLOP WITH MASTER RESET
MILITARY AND COMMERCIAL TEMPERATURE RANGES
ORDERING INFORMATION
IDTXX
Temp. Range
FCT
X
Family
XXXX
X
X
Device Type
Package
Process
Blank
B
Commercial
MIL-STD-883, Class B
P
D
SO
L
E
Q
Plastic DIP
CERDIP
Small Outline IC
Leadless Chip Carrier
CERPACK
Quarter-size Small Outline Package
273T
273AT
273CT
Octal D Flip-Flop w/Clear
Blank
High Drive
54
74
–55°C to +125°C
0°C to +70°C
2568 drw 09
6.10
7
Similar pages