PRODUCT DATASHEET Ronda series last update 22/1/2018 DETAILS Product Number FN15972_RONDA-ZT45-C Family Ronda Type Assembly Color clear Diameter 69,9 mm Height 14,6 mm Style round Optic Material PMMA Holder Material Fastening socket Status production ready ROHS Compliant Yes Date Updated 22/01/2018 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V6 Gen6 Asymmetric degAsymmetric 90 % 0.870 LEDiL: F15253_HEKLA-SOCKET-A Vesta TW 9mm (12W) Asymmetric degAsymmetric 86 % 0.580 LEDiL: C16142_HEKLA-SOCKET-K VERO10 sim: AsymmetricAsymmetric 88 % 0.560 - Vesta DTW 15mm (33W) Asymmetric degAsymmetric 80 % 0.370 Bender Wirth: 491 Typ L8 CLL03x/CLU03x Asymmetric degAsymmetric 82 % 0.370 LEDiL: F15859_HEKLA-SOCKET-I CLL02x/CLU02x (LES10) Asymmetric degAsymmetric 88 % 0.570 LEDiL: F15255_HEKLA-SOCKET-C CLU700/701 Asymmetric degAsymmetric 90 % 0.840 LEDiL: F15255_HEKLA-SOCKET-C CLC020 Series (Dim-To-Warm) Asymmetric degAsymmetric 85 % 0.590 LEDiL: C16142_HEKLA-SOCKET-K CXA/B 15xx Asymmetric degAsymmetric 90 % 0.630 LEDiL: F15256_HEKLA-SOCKET-D CXA/B 13xx Asymmetric degAsymmetric 90 % 0.800 LEDiL: F15956_HEKLA-SOCKET-J LUXEON CoB 1202s Asymmetric degAsymmetric 91 % 0.790 LEDiL: F15848_HEKLA-SOCKET-G COB T-Type sim: AsymmetricAsymmetric sim: 84 % sim: 0.760 LEDiL: F15848_HEKLA-SOCKET-G LC020C Asymmetric degAsymmetric 90 % 0.640 LEDiL: F15848_HEKLA-SOCKET-G LC010C Asymmetric degAsymmetric 89 % 0.710 LEDiL: F15848_HEKLA-SOCKET-G COB D Series LES 9.8 mm Asymmetric degAsymmetric 89 % 0.560 LEDiL: F15255_HEKLA-SOCKET-C COB D Series LES 14.5 mm Asymmetric degAsymmetric 82 % 0.350 LEDiL: F15859_HEKLA-SOCKET-I MJT COB LES 9.8 Asymmetric degAsymmetric 87 % 0.540 LEDiL: F15255_HEKLA-SOCKET-C MJT COB LES 6 Asymmetric degAsymmetric 88 % 0.800 LEDiL: F15255_HEKLA-SOCKET-C SLE G6 LES10 sim: AsymmetricAsymmetric sim: 93 % sim: 0.610 LEDiL: F15255_HEKLA-SOCKET-C February 5th 2018 3:13 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H OPTIC/HOLDER ASSEMBLY 4 4 1. Place pin on the side of the lens into relative hole on the holder. 2.Press the lens under clips on the holder, ensuring both clips are fixed. Ronda optics Pin Holder hole F15635_RONDA-HLD-C 3 3 M3 screw+washer Hekla socket, see compatibility www.ledil.com Clips Led, see compatibility www.ledil.com Oval beam direction 2 Holder C can be turned 90 ->fixing screw can be at beam direction or 90 angle to it 20.46 2 3.42 54.95 (with socket) Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 16.61 1 Leads out AWG20 recommended Max. 28.2 (F156156_Ronda WAS) H G 53.9 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE RONDA-C_Datasheet SIZE 1 PART NUMBER A3 SCALE 1:1 WEIGHT SHEET B A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.