Power Inductors - Shielded SPECIFICATIONS CTIHLP73VCZF Series Parts are only available ±20% inductance tolerance only *Irms DC current (A) will cause an approximately ΔT of 40°C. **Isat DC current (A) will cause L0 to drop approximately 20%. From .10 µH to 4.7 µH Not shown at actual size. RoHS Compliant ctparts.com Inductance (µH) L Test Freq. (KHz) *Irms Typ. (A) **Isat Typ. (A) DCR Max. Ω) (mΩ CTIHLP73VCZF-R10M CTIHLP73VCZF-R30M CTIHLP73VCZF-R33M CTIHLP73VCZF-R47M CTIHLP73VCZF-R68M CTIHLP73VCZF-R82M 0.10 0.30 0.33 0.47 0.68 0.82 100 100 100 100 100 100 32 20 20 16.5 15 13 45 33 33 27 24 23 1.9 4.1 4.1 5.2 6.0 8.0 CTIHLP73VCZF-1R0M CTIHLP73VCZF-1R5M CTIHLP73VCZF-2R2M CTIHLP73VCZF-3R3M CTIHLP73VCZF-4R7M 1.0 1.5 2.2 3.3 4.7 100 100 100 100 100 12 9.5 8.5 6 5.5 22 18 14 12 9 10.0 13.5 17 32 35 Part Number PHYSICAL DIMENSIONS Size mm inches A B C D Max. Max. Typ. 6.6±0.2 7.3 3.0 2.4 0.26±0.008 0.29 0.12 0.09 B CHARACTERISTICS Description: SMD (shielded) power inductor Applications: High density DC/DC converters. POL converters. High current VRM/VRD for notebooks, Servers, and desktop CPUs. High speed chargers. Operating Temperature: -55°C to +125°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4285A at 100KHz, 0.5V Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. A XXX D C Marking: Inductance Code RECOMMENDED LAND PATTERN Unit: mm 3.5 2.35 6.05 CENTRAL Technologies 04.15.08 Manufacturer of Passive and Discrete Semiconductor Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2008 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice