MODZ Series / 2” Square, 5 pin OCXO ¾ Oven Controlled Oscillator ¾ Ultra High Stability ¾ SC Crystal ¾ -40°C to 85° Available ¾ Sinewave Output PART NUMBERING GUIDE: MOD Z 12 S 010 B z Output Type Z = Sinewave Operating Temperature A = 0ºC to 50ºC B = -10ºC to 60ºC C = -20ºC to 70ºC D = -30ºC to 70ºC E = -30ºC to 80ºC F = -40ºC to 85ºC Supply Voltage 12 = 12 Volt Crystal Cut S = SC Cut Frequency Frequency Stability 001 = ±1ppb 005 = ±5ppb 010 = ±10ppb 050 = ±50ppb ELECTRICAL SPECIFICATIONS: Frequency Range 1.0MHz to150.0MHz Frequency Stability ±1ppb to ±50ppb Operating Temperature -40°C to 85°C max* * All stabilities not available, please consult MMD for availablity. Storage Temperature -40°C to 95°C Output Sinewave ±3 dBm 50Ω Supply Voltage 12.0V Supply Current 120mA typ. / 450mA max Warm-up Time 30min. @ 25°C Input Impedance 100K Ohms typical Crystal SC Cut Phase Noise @ 10MHZ SC 10 Hz Offset -113dBc 100 Hz Offset -135dBc 1000 Hz Offset -140dBc 10K Hz Offset -155dBc 100K Hz Offset -155dBc Voltage Control 0 to VCC ±0.75ppm typ Aging (after 30 days) ±0.1ppm/yr. MECHANICAL DETAILS: Pin Connections Pin 1 = Vc Pin 2 = +5Vdc Pin 3 = Output Pin 4 = Ground Pin 5 = Supply Voltage MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomponents.com [email protected] Specifications subject to change without notice Revision: 02/23/07 C