BOT OPI1000LA Optically coupled isolators surface mount low profile Datasheet

OPI 1000L Series
These
components
are RoHS
compliant
Optically Coupled Isolators
Surface Mount Low Profile
Pb
ATEX & IECEx
CERTIFIED
The OPI 1000L A through E are a series of Optically Coupled Isolators each consisting of a Infrared emitter
coupled to a silicon photo transistor. The series is designed for applications requiring high voltage isolation
between input & output.
•
Surface Mount configuration in Tape & Reel
High Current Transfer ratio– 40% min @ 1mA If
•
Low Profile
10KV isolation
CERTIFICATE ATEX BAS01ATEX1278U/1
CERTIFICATE IECEx BAS 06.0021U
Designed and manufactured to:IEC 60079-0: 2000 Edition 3.1
IEC 60079-11 :1999 Edition 4
IEC 60097-26 :2004 Edition 1
Conditions of use apply:- See Schedule of limitations on certificate.
Designed and manufactured to:- EN50020 1994
EN50014 1997
EN50284 1999
Conditions of use apply:- EN50020 1994 clauses
6.4.9 and 8.8
MECHANICAL DATA
2.0
14
+0.2
0
+0.2
6
0
2.0
1.0
1.0 Min Wall
2.55/2.50
5.1+0.1-0.0
7.0 max
0.5+/-0.1
1.0
1.27
2.5
2.54
K
An
C
E
0.5 Square
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR, LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
1/4
14.10.06 ISS K
OPI 1000L
ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted)
INPUT DIODE
FORWARD DC CURRENT
REVERSE DC VOLTAGE
POWER DISSIPATION
100mA
5 Volts
OUTPUT TRANSISTOR
COLLECTOR-EMITTER VOLTAGE
COLLECTOR CURRENT
POWER DISSIPATION
35 Volts
15 mA
OPERATING TEMP
-25OC TO +100OC
STORAGE TEMP
-25OC TO +100OC
+ 10KV DC (i)
INPUT-TO-OUTPUT ISOLATION VOLTAGE
i)
ii)
iii)
Measured with the input leads and output leads shorted together for one min.
Thermal resistance 375 K/W
Thermal resistance 450 K/W
Whilst the devices are capable of operating continually at the noted elevated temperatures users
should be aware of the possibility of a reduction in CTR over long periods at high temperatures
& currents.
RECOMMENDED FOOTPRINT
18.70
12.20
3.68
1.32
0.5
2.64
This
component
is RoHS
compliant
Pb
15.64
PAD CENTRES
Packing
Waffle Trays - 100 per tray 290mm x 200mm.
Tape & Reel - 400 Devices per 13” Diam Reel with 7” HuB 32mm Wide tape.
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR, LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
2/4
14.10.06 ISS K
OPI 1000L
ADVISED SOLDERING CONDITIONS
These
components
are RoHS
compliant
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR, LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
Pb
3/4
14.10.06 ISS K
OPTO ELECTRONIC DATA (TA = 25OC)
PARAMETER
These
components
are RoHS
compliant
OPI 1000L
Pb
SYMBOL
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Forward Voltage
VF
-
-
1.3
V
If = 20mA
Reverse Voltage
VR
5.0
-
-
V
Ir = 100uA
BVceo
35
-
-
V
Ic = 10 uA
Iceo
OPI1000lE
OPI1000lA
to D
-
10
nA
Vce = 30 V
-
100
nA
Vce = 10 V
5.0
-
-
V
Ic = 100uA
INPUT DIODE
OUTPUT TRANSISTOR
Collector-Emitter Breakdown
Voltage
Collector-Emitter Leakage Current
Emitter-Collector Breakdown
BVeco
COUPLED PAIR
DC Current Transfer Ratio
IC/IF
OPI 1000L A
-
25
-
-
%
If = 10 mA Vce
=5V
OPI 1000L B
-
50
-
-
%
If = 10 mA Vce
=5V
OPI 1000L C
-
100
-
-
%
If = 10 mA Vce
=5V
OPI 1000L E
-
40
-
-
%
If = 1mA
Vce = 5 V
VISO
10
-
-
KV
-
VCE(SAT)
-
-
0.4
V
If = 10 mA,
Ic=1.6mA
Turn-on time
t on
-
8
-
uS
Ic=2mA
Turn-off time
t off
-
8
-
uS
Vcc = 5V
RL = 100ohm
Isolation Voltage
Collector-emitter saturation voltage
BEDFORD OPTO TECHNOLOGY LTD
1,BIGGAR BUSINESS PARK, BIGGAR, LANARKSHIRE, ML12 6FX
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: [email protected]
4/4
14.10.06 ISS K
Similar pages