BAS19 Surface Mount Switching Diode Elektronische Bauelemente RoHS Compliant Product FEATURES · · · · A A suffix of "-C" specifies halogen & lead-free L Fast Switching Speed 3 Surface Mount Package Ideally Suited for Automatic Insertion B S Top View 1 For General Purpose Switching Applications High Conductance V 2 G 3 3 1 CATHODE ANODE C 1 H D 2 J K MAXIMUM RATINGS Rating Symbol Value Unit Continuous Reverse Voltage VR 120 Vdc Peak Forward Current IF 200 mAdc Peak Forward Surge Current IFM(surge) 500 Symbol Max Unit PD 225 SOT-23 mAdc THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR– 5 Board(1) TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Total Device Dissipation Alumina Substrate,(2) TA = 25°C Derate above 25°C Thermal Resistance, Junction to Ambient Junction and Storage Temperature 1.8 Dim Min Max A 2.800 3.040 B 1.200 1.400 C 0.890 1.110 D 0.370 0.500 G 1.780 2.040 mW H 0.013 0.100 mW/°C J 0.085 0.177 K 0.450 0.600 RqJA 556 °C/W PD 300 mW 2.4 mW/°C RqJA 417 °C/W TJ, Tstg – 55 to +150 °C L 0.890 1.020 S 2.100 2.500 V 0.450 0.600 All Dimension in mm DEVICE MARKING BAS19 = JP ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit — — — 0.1 100 40 µAdc 120 — Vdc — — — — 715 855 1000 1250 OFF CHARACTERISTICS Reverse Voltage Leakage Current (VR = 100 Vdc,TJ = 25OC) (VR = 100 Vdc, TJ = 150°C) (VR = 25 Vdc, TJ = 150°C) Reverse Breakdown Voltage (IBR = 100 µAdc) IR V(BR) Forward Voltage (IF = 1.0 mAdc) (IF = 10 mAdc) (IF = 100 mAdc) (IF = 200 mAdc) VF Diode Capacitance (VR = 0, f = 1.0 MHz) CD Reverse Recovery Time (IF = IR = 30 mAdc, RL = 100 Ω) trr 1.FR–5 = 1.0 X 0.75 X 0.062 in. http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A — mV 5.0 pF 50 ns 2.Alumina = 0.4 X 0.3 X 0.024 in. 99.5% alumina. Any changing of specification will not be informed individual Page 1 of 2 BAS19 Surface Mount Switching Diode Elektronische Bauelemente 820 Ω +10 V 2.0 k tr 0.1 µF IF 100 µH tp IF t trr 10% t 0.1 µF 90% DUT 50 Ω Input Sampling Oscilloscopes 50 Ω Output Pulse Generator IR(REC) = 1.0 mA IR VR Output Pulse (IF = IR = 10 mA; Measured at IR(REC) = 1.0 mA) Input Signal Notes: 1. A 2.0 kΩ variable resistor adjusted for a Forward Current (IF) of 10 mA. Notes: 2. Input pulse is adjusted so IR(peak) is equal to 10 mA. Notes: 3. tp » trr Figure 1. Recovery Time Equivalent Test Circuit 7000 6000 5000 3500 3000 TA = –55°C Reverse Current (nA) Forward Voltage (mV) 2500 2000 1500 TA = 155°C 1000 TA = 25°C 4000 3000 6 5 4 3 TA = 25°C 2 1 0 500 0 0.1 TA = 155°C 0.2 0.5 1 2 5 10 20 Forward Current (mA) Figure 2. Forward Voltage http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A 50 100 200 TA = –55°C 1 2 5 10 20 50 100 200 300 Reverse Voltage (V) Figure 3. Reverse Leakage Any changing of specification will not be informed individual Page 2 of 2