Discontinuation Notice 31.12.2012 30.06.2012 AZ832P ! AZ830P Discontinuation date: Date of last order: Recommended replacement: on tin ue d POLARIZED DIP RELAY BISTABLE (LATCHING) FEATURES • • • • • • • • • High sensitivity, 90 mW pickup Low profile DIP package Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Epoxy sealed DC coils to 48 VDC High switching capacity, 60 W, 125 VA Fits standard 16 pin IC socket UL file E43203; CSA file LR 36664 GENERAL DATA CONTACTS Life Expectancy Mechanical Electrical Minimum operations 1 x 108 1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC 2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC Arrangement DPDT (2 Form C) Bifurcated crossbar contacts Ratings Resistive load: Set Time (typical) 3 ms at nominal coil voltage Max. switched power: 60 W or 125 VA Max. switched current: 2 A Max. switched voltage: 150 VDC or 300 VAC Reset Time (typical) 3.5 ms at nominal coil voltage Capacitance Contact to contact: 1.0 pF Contact set to contact: 1.0 pF Contact to coil: 2.0 pF Bounce (typical) At 10 mA contact current 1.5 ms at operate N.O. side 2.5 ms at operate N.C. side Dielectric Strength (at sea level) 1500 Vrms contact to coil 1000 Vrms between contact sets 1000 Vrms across contacts Meets FCC Part 68.302 lightning surge Meets FCC Part 68.304 V dielectric Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Ambient Temperature Operating At nominal coil voltage Standard: -40°C (-40°F) to 85°C (185°F) Sensitive: -40°C (-40°F) to 95°C (203°F) Both: -40°C (-40°F) to 105°C (221°F) Rated Load UL Material Resistance 2 A at 30 VDC 1 A at 120 VAC Silver alloy, gold clad. Silver palladium, gold clad available upon request (not recommended for current greater than 1 Amp). < 50 milliohms initially COIL (Polarized) Power Standard coil: 176 mW Sensitive coil: 90 mW 1.2 W at 20°C (68°F) ambient sc At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature Standard: 38°C (68°F) at nominal coil voltage Sensitive: 21°C (38°F) at nominal coil voltage Storage Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 40 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams Max. 115°C (239°F) NOTES All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Relay has fixed coil polarity. Relay adjustment may be affected if undue pressure is exerted on relay case. 5. For complete isolation between the relay’s magnetic fields, it is recommended that a .197" (5.0 mm) space be provided between adjacent relays. 6. Specifications subject to change without notice. Di 1. 2. 3. 4. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-08 Discontinuation Notice Discontinuation date: Date of last order: Recommended replacement: AZ830P ! RELAY ORDERING DATA 31.12.2012 30.06.2012 AZ832P Maximum Switching Capacity on tin ue d STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 Max. Continuous VDC 7.5 6 9.0 9 Coil Resistance ± 10% 69.4 Set Reset VDC 3.5 AZ830P2–2C–5DE 100 4.2 AZ830P2–2C–6DE 13.5 225 6.3 AZ830P2–2C–9DE 12 18.0 400 8.4 AZ830P2–2C–12DE 24 36.0 1,600 16.8 AZ830P2–2C–24DE 48 72.0 6,400 33.6 AZ830P2–2C–48DE 9.0 8.0 7.0 6.0 5.0 4.0 ORDER NUMBER* 3.0 2.0 .9 .8 .7 .6 .5 .4 SENSITIVE RELAYS .3 5 11.0 139 3.5 AZ830P2–2C–5DSE 6 13.0 200 4.2 AZ830P2–2C–6DSE 9 19.5 450 6.3 AZ830P2–2C–9DSE 12 26.0 800 8.4 AZ830P2–2C–12DSE 24 53.0 3,200 16.8 AZ830P2–2C–24DSE 48 106.0 12,800 33.6 AZ830P2–2C–48DSE .2 * Add suffix “A” for silver palladium gold clad contacts. MECHANICAL DATA Coil Temperature Rise .788 (20.0) .390 (9.9) .386 .366 (9.8) (9.3) .138 (3.5) .044 (1.1) .200 (5.07) .100 (2.54) (.024 ± .005) (0.6 ± 0.13) TYP .200 (5.07) .200 (5.07) .012 ± .005 (0.3 ± 0.13) TYP .044 (1.1) REF 0.03 DIA (0.8) (10 HOLES) sc 1 4 2 6 Di – 16 .044 (1.1) REF 8 0.1 (2.54) + + – 15 13 11 9 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-04-08