M54HC4002 M74HC4002 DUAL 4 INPUT NOR GATE . . . . . . . . HIGH SPEED tPD = 10 ns (TYP.) AT VCC = 5 V LOW POWER DISSIPATION ICC = 1 µA (MAX.) AT TA = 25° C HIGH NOISE IMMUNITY VNIH = VNIL = 28 % VCC (MIN.) OUTPUT DRIVE CAPABILITY 10 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE |IOH| = IOL = 4 mA (MIN.) BALANCED PROPAGATION DELAYS tPLH = tPHL WIDE OPERATING VOLTAGE RANGE VCC (OPR) = 2 V TO 6 V PIN AND FUNCTION COMPATIBLE WITH 4002B B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) ORDER CODES : M54HC4002F1R M74HC4002M1R M74HC4002B1R M74HC4002C1R DESCRIPTION The M54/74HC4002 is a high speed CMOS DUAL 4-INPUT NOR GATE fabricated in silicon gate C2MOS technology. PIN CONNECTIONS (top view) It has the same high speed performance of LSTTL combined with true CMOS low power consumption. The internal circuit is composed of 3 stages including buffer output, which ensures high noise immunity and stable output. All inputs are equipped with protection circuits against static discharge and transient excess voltage. INPUT AND OUTPUT EQUIVALENT CIRCUIT NC = No Internal Connection October 1992 1/9 M54/M74HC4002 TRUTH TABLE nA L H X X X nB L X H X X IEC LOGIC SYMBOL nC L X X H X nD L X X X H nY H L L L L PIN DESCRIPTION PIN No 1, 13 2, 9 3, 10 4, 11 5, 12 6, 8 7 14 SYMBOL 1Y to 2Y 1A to 2A 1B to 2B 1C to 2C 1D to 4D NC GND VCC NAME AND FUNCTION Data Outputs Data Inputs Data Inputs Data Inputs Data Inputs Not Connected Ground (0V) Positive Supply Voltage SCHEMATIC CIRCUIT (Per Gate) ABSOLUTE MAXIMUM RATING Symbol Parameter VCC Supply Voltage VI VO DC Input Voltage DC Output Voltage IIK IOK IO ICC or IGND Value Unit -0.5 to +7 V -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 V V DC Input Diode Current ± 20 mA DC Output Diode Current DC Output Source Sink Current Per Output Pin ± 20 ± 25 mA mA DC VCC or Ground Current ± 50 mA 500 (*) -65 to +150 mW o C PD Tstg Power Dissipation Storage Temperature TL Lead Temperature (10 sec) 300 o C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition isnotimplied. (*) 500 mW: ≅ 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC 2/9 M54/ M74HC4002 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Value Unit V V VCC VI Supply Voltage Input Voltage 2 to 6 0 to VCC VO Output Voltage 0 to VCC Top tr, tf Operating Temperature: M54HC Series M74HC Series Input Rise and Fall Time V o -55 to +125 -40 to +85 0 to 1000 VCC = 2 V VCC = 4.5 V 0 to 500 VCC = 6 V 0 to 400 C C ns o DC SPECIFICATIONS Test Conditions Symbol VIH V IL V OH VOL Parameter High Level Input Voltage Low Level Input Voltage High Level Output Voltage Low Level Output Voltage VCC (V) 2.0 Min. 1.5 4.5 3.15 6.0 2.0 4.2 6.0 2.0 ICC Quiescent Supply Current Max. -40 to 85 oC -55 to 125 oC 74HC 54HC Min. 1.5 Max. 3.15 Min. 1.5 4.2 4.2 0.5 0.5 1.35 1.35 1.35 1.8 2.0 1.9 1.9 4.5 4.4 4.4 6.0 4.5 5.9 4.18 6.0 4.31 5.9 4.13 5.9 4.10 6.0 IO=-5.2 mA 5.68 5.8 5.63 5.60 6.0 6.0 V 1.8 1.9 4.4 2.0 4.5 V 0.5 1.8 Unit Max. 3.15 VI = IO=-20 µA VIH or V IL IO=-4.0 mA 4.5 4.5 6.0 Input Leakage Current Typ. 4.5 6.0 II Value TA = 25 oC 54HC and 74HC V 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.1 0.0 0.1 0.1 0.1 0.17 0.18 0.26 0.26 0.33 0.33 0.40 0.40 VI = VCC or GND ±0.1 ±1 ±1 µA VI = VCC or GND 1 10 20 µA VI = IO= 20 µA VIH or V IL IO= 4.0 mA IO= 5.2 mA V 3/9 M54/M74HC4002 AC ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = tf = 6 ns) Test Conditions Symbol Parameter tTLH tTHL Output Transition Time tPLH tPHL Propagation Delay Time Value o VCC (V) TA = 25 C 54HC and 74HC Min. Typ. Max. -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 2.0 30 75 95 110 4.5 6.0 8 7 15 13 19 16 22 19 2.0 48 100 125 150 4.5 12 20 25 30 6.0 10 17 21 26 10 10 10 CIN Input Capacitance 5 CPD (*) Power Dissipation Capacitance 20 Unit ns ns pF pF (*) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD •VCC •fIN + ICC/4 (per Gate) SWITCHING CHARACTERISTICS TEST CIRCUIT TEST CIRCUIT ICC (Opr.) INPUT WAVEFORM IS THE SAME AS THAT IN CASE OF SWITCHING CHARACTERISTICS TEST. 4/9 M54/ M74HC4002 Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 5/9 M54/M74HC4002 Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 6/9 M54/ M74HC4002 SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 7/9 M54/M74HC4002 PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 8/9 M54/ M74HC4002 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 9/9