API_newlayouts_single:APIcatalog_newlayouts 8/27/10 10:56 AM Page 127 a Tr s MB er NU m or f ns SH Common Mode Choke/IsolationTransformer ER CE AN ) CT (µH DU L IN A E PIC AG TY AK T LE EN RR UM CU M S AXI RM M D S) TE P M RA (A CE AN ) ST S SI HM RE M (O DC MU XI MA CE AN ) CT (µH DU % IN 25 L2 ± or L1 * CM6296R CM6296 DA SERIES -253 -503 -104 -154 -204 -304 -454 -654 -105 -155 -255 SERIES CM6296 FERRITE CORE 25 0.014 10.0 50 0.014 10.0 100 0.016 9.5 150 0.016 9.5 200 0.016 8.5 300 0.020 7.5 450 0.024 6.5 650 0.030 5.5 1000 0.050 3.5 1500 0.090 2.5 2500 0.162 2.2 0.7 0.8 1.4 1.8 2.2 3.3 4.6 6.2 9.3 14.5 21.8 *Complete part # must include series # PLUS the dash # For surface finish information, refer to www.delevanfinishes.com Actual Size Physical Parameters Inches A 1.058 ± 0.010 B 0.870 ± 0.010 C 0.210 Typ. D 0.200 Typ. E 0.430 Max. Millimeters 26.87 ± 0.25 22.10 ± 0.25 5.33 Typ. 5.08 Typ. 10.74 Max. Mechanical Configuration Flat top surface mount case with excellent coplanarity of terminals Operating Temperature –55°C to +125°C Configuration Two inductors per unit; internal terminals: #1 (start)-#2 (finish) & #4 (start) -#3 (finish) Electrical Configuration 1) Inductance and DCR in table is for either L1 or L2 2) Leakage Inductance tested at L1 with L2 shorted or at L2 with L1 shorted. 3) Windings balanced within 2% 4) Inductance tested @ 1.0kHz Marking DELEVAN; part number, inductance with units. A white dot indicates the location of pin 1. Example: CM6296R-155 DELEVAN CM6296R-155 1500 uH Packaging Bulk only Weight (Grams) 9.0 (Ref.) Rated RMS Current Per Winding Based Upon 20°C temperature rise from 25°C ambient Maximum Power Dissipation at 25°C 2.5 Watts Dielectric Withstanding Voltage 500 V RMS, 60Hz 270 Quaker Rd., East Aurora NY 14052 • Phone 716-652-3600 • Fax 716-652-4814 • E-mail: [email protected] • www.delevan.com 4/2010