SURFACE MOUNT GLASS PASSIVATED ZENER DIODE Zener Voltage MZ1.0GM3V9-100 THRU MZ100-5 3.9 to 100 Volts Standy State Power 1.0 Watt GLASS MELE FEATURES • • Silicon Planar Power Zener Diodes For use in stabilizing and clipping circuits with higher Power rating The Zener voltages are graded according to the International E24 standard. Smaller voltage tolerances anc other Zener voltages are available upon request. • .102(2.6) .094(2.4) 0.028(0.60) 0.018(0.46) .205(5.2) .189(4.8) MECHNICAL DATA • • Case: MELF Glass Case Weight: approx.0.25g Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Symbol Value Unit Power Dissipation at Tamb=75℃ Ptot 1.0(1) W Junction Temperature Tj 150 ℃ Storage Temperature Range Ts -55 to ~+150 ℃ Zener Current (see Tamb “Characteristics”) Characteristics at Tamb=25℃ Symbol Min Typ Max Unit RthJA - - 170(1) ℃/W Thermal resistance Junction to Ambient Air Notes 1. . Valid provided that electrodes are kept at ambient temperature. E-mail: [email protected] Web Site: www.cnmic.com SURFACE MOUNT GLASS PASSIVATED ZENER DIODE MZ1.0GM3V9-100 THRU MZ100-5 Zener Voltage 3.9 to 100 Volts Standy State Power 1.0 Watt ELECTRICAL CHARACTERISTIC Ratings at 25℃ ambient temperature unless otherwise specified Dynamic Zener Temp.coeff. of Zener volt resistance Valtage(2) Device at at LZT f=1kHz at IZT Marking Type LZT min.max. Code max αvz(10-4/K) VZ(V) rzj(Ω ) MZ1.0GM3V9 3V9-100 3.7…4.1 -7…+2 4(＜7) MZ1.0GM4V3 4V3-100 4.0…4.6 -7…+3 4(＜7) MZ1.0GM4V7 4V7-100 4.4…5.0 -7…+4 4(＜7) MZ1.0GM5V1 5V1-100 4.8…5.4 -6…+5 2(＜5) MZ1.0GM5V6 5V6-100 5.2…6.0 -3…+5 1(＜2) MZ1.0GM6V2 6V2-100 5.8…6.6 -1…+6 1(＜2) MZ1.0GM6V8 6V8-100 6.4…7.2 0…+7 1(＜2) MZ1.0GM7V5 7V5-100 7.0…7.9 0…+7 1(＜2) MZ1.0GM8V2 8V2-100 7.7…8.7 +3…+8 1(＜2) MZ1.0GM9V1 9V1-50 8.5…9.6 +3…+8 2(＜4) MZ1.0GM10V 10V-50 9.4…10.6 +5…+9 2(＜4) MZ1.0GM11V 11V-50 10.4…11.6 +5…+10 3(＜7) MZ1.0GM12V 12V-50 11.4…12.7 +5…+10 3(＜7) MZ1.0GM13V 13V-50 12.4…14.1 +5…+10 4(＜9) MZ1.0GM15V 15V-50 13.8…15.8 +5…+10 4(＜9) MZ1.0GM 16V 16V-25 15.3…17.1 +5…+11 5(＜10) MZ1.0GM18V 18V-25 16.8…19.1 +7…+11 5(＜11) MZ1.0GM20V 20V-25 18.8…21.2 +7…+11 6(＜12) MZ1.0GM22V 22V-25 20.8…23.3 +7…+11 7(＜13) MZ1.0GM24V 24V-25 22.8…25.6 +7…+12 8(＜14) MZ1.0GM27V 27V-25 25.1…28.9 +7…+12 9(＜15) MZ1.0GM30V 30V-25 28…32 +7…+12 10(＜20) MZ1.0GM33V 33V-25 31…35 +7…+12 11(＜20) MZ1.0GM36V 36V-10 34…38 +7…+12 25(＜60) MZ1.0GM39V 39V-10 37…41 +8…+12 30(＜60) MZ1.0GM43V 43V-10 40…46 +8…+13 35(＜80) MZ1.0GM47V 47V-10 44…50 +8…+13 40(＜80) MZ1.0GM51V 51V-10 48…54 +8…+13 45(＜100) MZ1.0GM56V 56V-10 52…60 +8…+13 50(＜100) MZ1.0GM62V 62V-10 58…66 +8…+13 60(＜130) MZ1.0GM68V 68V-10 64…72 +8…+13 65(＜130) MZ1.0GM75V 75V-10 70…79 +8…+13 70(＜160) MZ1.0GM85V 82V-10 77…88 +8…+13 80(＜160) MZ1.0GM91V 91V-5 85…96 +9…+13 120(＜250) MZ1.0GM100V 100V-5 94…106 +9…+13 130(＜250) Notes: (1) Valid provided that electrodes are kept at ambient temperature (2) Tested with pulses tp=5ms E-mail: [email protected] Test current lZT(mA) 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 5 5 Web Site: www.cnmic.com Reverse voltage at IR=0.5μA VR(V) ＞0.7 ＞1.5 ＞2.0 ＞3.0 ＞5.0 ＞6.0 ＞7.0 ＞7.5 ＞8.5 ＞9.0 ＞10 ＞11 ＞12 ＞14 ＞15 ＞17 ＞18 ＞20 ＞22.5 ＞25 ＞27 ＞29 ＞32 ＞35 ＞38 ＞42 ＞47 ＞51 ＞56 ＞61 ＞68 ＞75 Admissible Zener current(1) at Tamb=25℃ Iz(mA) 203 182 165 150 135 128 110 100 89 82 74 66 60 55 49 44 40 36 34 29 27 25 22 20 18 17 15 14 13 11 10 9 8 7.5 7 SURFACE MOUNT GLASS PASSIVATED ZENER DIODE Zener Voltage MZ1.0GM3V9-100 THRU MZ100-5 3.9 to 100 Volts Standy State Power 1.0 Watt RATING AND CHARACTERISTIC CURVES MZ1.0GM3V9-100 THRU MZ1.0GM100-5 Breakdown characteristics Tj=constant( pulsed ) mA 240 3V9 4V7 200 T j=25℃ 5V6 6V8 160 Iz 8V2 120 Test Current Iz 100mA 10V 12V 80 5mA 40 0 0 1 2 3 4 5 6 7 9 8 10 11 12 13 14 15V Vz Breakdown characteristics Tj=constant( pulsed ) mA 60 15V 18V T j=25℃ 22V 50 27V 40 Iz 33V Test Current Iz 25mA 30 39V 47V 20 10mA 10 0 0 5 10 15 20 25 30 35 Vz E-mail: [email protected] Web Site: www.cnmic.com 40 45 50V SURFACE MOUNT GLASS PASSIVATED ZENER DIODE Zener Voltage MZ1.0GM3V9-100 THRU MZ100-5 3.9 to 100 Volts Standy State Power 1.0 Watt RATING AND CHARACTERISTIC CURVES MZ1.0GM3V9-100 THRU MZ1.0GM100-5 Breakdown characteristics Tj=constant( pulsed ) mA 24 TJ =25 ℃ 56V Iz 68V 82V Test Current Iz 10mA 100V 10 5mA 0 0 50 100 150 200V Vz Pulse thermal resistance versus pulse duration Admissible power dissipation versus ambient temperature Vaild provided that electrodes are kept at amblent temperature Vaild provided that electrodes are kept at amblent temperature K/W W 103 1.0 5 4 3 0.8 2 Ptot rthU 102 0.6 0.5 5 4 3 0.2 2 0.4 10 5 4 0.2 3 0.1 0.05 2 0 100 200℃ 1 tp 0.02 0.01 10 -5 V= 10 -3 Tamb E-mail: [email protected] P1 T v=0 10 -4 tp T 10 -2 10 -1 tp Web Site: www.cnmic.com 1 10s SURFACE MOUNT GLASS PASSIVATED ZENER DIODE MZ0.5GE2V0-20 THRU MZ0.5GE75V-1.7 MZ0.5GN SERIES MZ0.5GE2V THRU MZ0.5GE75V RATING AND CHARACTERISTIC CURVES MZ1.0GM3V9-100 THRU MZ1.0GM100-5 Dynamic resistance versus Zener current Dynamic resistance versus Zener current Ω 103 Ω 103 7 5 4 5 3 rzj 4 2 3 5V1 102 rzj 4V3 5 4 18V 3 2 102 7 100V 82V 68V 10 5 56V 5 4 3 12V 2 4 3 1 2 10V 6V2 2 7V5 1 2 3 4 5 7 10 2 43V 100mA 3 4 5 10 0.1 2 3 4 5 Dynamic resistance versus Zener current Ω 100 7 5 4 3 rzj 2 43V 36V 10 30V 7 24V 22V 5 4 18V 3 2 1 1 2 3 4 5 10 2 3 4 5 100mA Iz E-mail: [email protected] 1 2 Iz Iz Web Site: www.cnmic.com 3 4 5 100mA