DATA SHEET FG1601FCT~FG1607FCT SEMICONDUCTOR FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 16.0 Amperes FEATURES • Fast switching ITO-220AB Unit:inch(mm) .138(3.50) • Low leakage • Low forward voltage drop • High current capability • High surge capability • High reliability • High temperature soldering : 260 O C / 10 seconds at terminals • Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANICAL DATA Case: ITO-220AB molded plastic Epoxy : Device has UL flammability classi ficat ion 9 4V-O Lead: MIL- STD-202E method 208C guaranteed Mounting position: Any Weigh t: 2 .24 grams Polarity : A s m arki ng MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS (At TA = 25 °C unless otherwise noted) RATINGS SYMBOL FG FG FG FG FG FG FG 1601FCT 1602FCT 1603FCT 1604FCT 1605FCT 1606FCT 1607FCT UNITS Maximum Recurrent Peak Reverse V oltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectif ied Current at TC = 75 °C Peak Forward Surge Current 8.3 ms single half sine- wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 3 ) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Volts IO 16.0 Amps IFSM 125 Amps R θJC 3 °C / w CJ 50 TJ, TSTG -55 to +150 pF °C ELECTRICAL CHARACTERISTICS (At TA = 25 °C unless otherwise noted) CHARACTERISTICS MaximumI nstantaneous Forward Vol tage at 8.0A DC SYMBOL FG FG FG FG FG UNITS Volts 10 uAmps 150 uAmps IR Maximum Full Load Reverse Current Average, Full Cycle at TC = 100 °C Maximum Reverse Recovery Time (Note 1) FG 1.3 VF Maxi mum DC Reverse Cur rent at Rated DC Blocking Vol tage TA = 25 °C FG 1601FCT 1602FCT 1603FCT 1604FCT 1605FCT 1606FCT 1607FCT trr 150 250 500 nSec NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts 3.Thermal Resistance Junction to Case. 4. Suffix “R” for Reverse Polarity. http://www.yeashin.com 1 REV.02 20150105 RATINGS AND CHARACTERISTIC CURVES FG1601FCT~FG1607FCT FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1000 12 8 4 0 0 150 75 o CASE TEMPERATURE. ( C) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 Tj=125 0C 10 1 Tj=25 0C TJ=125 0C 250 0.1 8.3ms Single Half Sine Wave JEDEC Method 200 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 150 100 80 FIG.5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 50 40 0 1 20 10 5 2 100 50 NUMBER OF CYCLES AT 60Hz 300 FIG.4- TYPICAL JUNCTION CAPACITANCE Tj=25 0C f=1.0MHz Vsig=50mVp-p 250 20 INSTANTANEOUS FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 300 CAPACITANCE.(pF) FIG.2- TYPICAL REVERSE CHARACTERISTICS PER LEG 16 INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD CURRENT. (A) 20 200 150 100 10 8 2 1 0.4 50 0 0.1 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.2 0.5 1 5 10 50 100 0.1 0.8 500 1000 REVERSE VOLTAGE. (V) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE. (V) FIG.6- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A (+) 50Vdc (approx) (-) (-) DUT PULSE GENERATOR (NOTE 2) NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) -1.0A NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms http://www.yeashin.com 0 -0.25A 1cm 2 SET TIME BASE FOR 5/ 10ns/ cm REV.02 20150105 亞 昕 科 技 股 份 有 限 公 司 YEASHIN TO/ITO220 包装规范 Packing 包装 Dimension 尺寸 TECHNOLOGY CO., LTD. Qty 数 Picture 图示 量 50 PCS Bag/Tube 袋/管装 527mm*33mm*7mm Inner box 内盒 555mm*140mm*55mm 2000 PCS Carton 外箱 575mm*285mm *155mm 8000 PCS http：//www.yeashin.com