AD ADP150AUJZ-3.0-R7 Redykit for the adp150 ldo Datasheet

Evaluation Board User Guide
UG-289
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
RedyKit for the ADP150 LDO
FEATURES
TYPICAL APPLICATION CIRCUITS
ADP150 ultralow noise voltage regulator
All-voltage options included for evaluation
Surface-mount ADP150 parts that can be easily soldered
Additional parts for prototyping
VIN
2
GND
3
EN
VOUT 5
VOUT = 1.8V
COUT
1µF
ON
ADP150UJZ-REDYKIT CONTENTS
NC 4
NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
1 ADP150UJ-3.3-EVALZ evaluation board, VOUT = 3.3 V
1 ADP150UJ-1.8-EVALZ evaluation board, VOUT = 1.8 V
5 additional ADP150 voltage options in a labeled bag
09908-002
OFF
Figure 1. ADP150UJZ-RedyKit
GENERAL DESCRIPTION
The ADP150UJZ-RedyKit RedyKit™ allows simplified
prototyping and evaluation and is available for every standard
fixed output voltage option in the ADP150 product family. The
RedyKit allows the user to evaluate all voltage options with one
easy-to-order kit.
All surface-mount ADP150 parts are sorted and stored in the kit
with the Analog Devices, Inc., part number and fixed output
voltage clearly printed on each zip-top bag (see Figure 2).
The ADP150UJZ-RedyKit comes with fixed 1.8 V and 3.3 V
evaluation boards. The kit also contains additional parts for
prototyping. The kit, which contains individually packaged parts
and the two evaluation boards, is packaged in an ESD foam pad
inside a treated cardboard box that measures 8.7" (L) × 7.9" (W)
× 1.75" (H), that is, 22 cm (L) × 20 cm (W) × 4.5 cm (H).
For additional information, also see the ADP150 evaluation
board user guide, UG-054.
The kit can be used in the engineering lab to evaluate required
voltage options. When other voltage options need to be
evaluated, a different part from the kit can be easily soldered
onto one of the evaluation boards supplied with the kit.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
1
Rev. 0 | Page 1 of 8
UG-289
Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
RedyKit Packages...............................................................................3
ADP150UJZ-RedyKit Contents...................................................... 1
Evaluation Board Schematic and Artwork.....................................4
General Description ......................................................................... 1
Ordering Information .......................................................................5
Typical Application Circuits............................................................ 1
RedyKit Bill of Materials (BOM) ................................................5
Revision History ............................................................................... 2
REVISION HISTORY
6/11—Revision 0: Initial Version
Rev. 0 | Page 2 of 8
Evaluation Board User Guide
UG-289
09908-102
REDYKIT PACKAGES
Figure 2. ADP150UJZ-RedyKit Package
Rev. 0 | Page 3 of 8
UG-289
Evaluation Board User Guide
EVALUATION BOARD SCHEMATIC AND ARTWORK
VIN
1
VIN
2
GND
3
EN
VOUT
VOUT 5
U1
C1
C2
J1
NC = NO CONNECT. DO NOT
CONNECT TO THIS PIN.
09908-003
NC 4
Figure 3. ADP150UJZ-RedyKit Evaluation Board Schematic
GND
GND
ADP150 - _____________ - EVALZ
VIN
VOUT
U1
C2C1
C3C4
J1
GND
09908-004
GND
EN
Figure 4. ADP150UJZ-RedyKit Evaluation Board Layout
Rev. 0 | Page 4 of 8
Evaluation Board User Guide
UG-289
ORDERING INFORMATION
REDYKIT BILL OF MATERIALS (BOM)
Table 1. ADP150UJZ-RedyKit BOM
Qty.
1
1
3
3
3
3
3
Model
ADP150UJ-3.3-EVALZ
ADP150UJ-1.8-EVALZ
ADP150AUJZ-1.8-R7
ADP150AUJZ-2.5-R7
ADP150AUJZ-2.8-R7
ADP150AUJZ-3.0-R7
ADP150AUJZ-3.3-R7
Output Voltage (VOUT)
3.3 V
1.8 V
1.8 V
2.5 V
2.8 V
3.0 V
3.3 V
Rev. 0 | Page 5 of 8
Maximum Current
150 mA
150 mA
150 mA
150 mA
150 mA
150 mA
150 mA
Description
Evaluation board
Evaluation board
5-lead TSOT
5-lead TSOT
5-lead TSOT
5-lead TSOT
5-lead TSOT
UG-289
Evaluation Board User Guide
NOTES
Rev. 0 | Page 6 of 8
Evaluation Board User Guide
UG-289
NOTES
Rev. 0 | Page 7 of 8
UG-289
Evaluation Board User Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2011 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG09908-0-6/11(0)
Rev. 0 | Page 8 of 8
Similar pages