Inductors B82559*A013 Helically wound power inductors HPI 13 Rated inductance 0.5 to 3.9 µH Rated current 10 to 25 A Construction ■ ■ ■ ■ Ferrite core Magnetically shielded Winding: enamel copper flat wire Self-leaded construction under body termination Features ■ ■ ■ ■ Very high rated current Extremely low DC resistance Very low profile and smallest possible footprint Suitable for pick and place processes Applications ■ Energy storage chokes for – DC/DC converters – VRM modules – POL converters Terminals ■ Pure tin (Pb-free) Marking EPCOS. ordering code, inductance, date of manufacture (coded) Delivery mode and packing unit Blister tape 24 mm, reel 330 mm dia. 4.95 mm height = 750 pcs./reel 5.95 mm height = 550 pcs./reel Recommended PCB layout Marking 4.4 12.8 11 max. 10.4 ref. 13.1 max. 2.1 ref. Dimensional drawing 10.4 FIN0255-D h FIN0254-V 1 09/04 B82559*A013 Inductors Helically wound power inductors HPI 13 General technical data and measuring conditions Rated inductance LR Measured with Wayne-Kerr 3260A/3265B, measuring voltage 100 mV Inductance tolerance ±10% Saturation current Isat Current that will result in approx. 20% drop in inductance value. Temperature response needs to be verified in specific applications. Test results on request. DC resistance Measured at 20 °C ambient temperature Solderability 235 °C, 5 s, wetting >90% Operating temperature −40 ... +130 °C Weight 2.2 g (height = 4.95 mm), 2.6 g (height = 5.95 mm) Characteristics and ordering codes LR Isat Rmax Height h Ordering code µH 0.50 0.95 1.1 1.4 2.2 2.4 3.0 3.9 A 30 25 20 22 15 16.5 13 12 mΩ 1.1 1.4 2.2 1.8 4.2 3.2 5.1 6.0 mm 4.95 5.95 4.95 5.95 4.95 5.95 4.95 5.95 B82559A0501A013 B82559A0951A013 B82559A0112A013 B82559A0142A013 B82559A0222A013 B82559A0242A013 B82559A0302A013 B82559A0392A013 Published by EPCOS AG Corporate Communications, P.O. Box 80 17 09, 81617 Munich, GERMANY ++49 89 636 09, FAX (0 89) 636-2 26 89 EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 2 09/04