CVHD-950 Model 9×14 mm SMD, 3.3V, CMOS 50 MHz HCMOS 3.3V 80 MHz HCMOS 3.3V K STE CRY -950 D H CV Hz 50 M K STE CRY -950 D H CV Hz 80 M z /H Bc z /H Bc 6d -16 1d -16 100 MHz HCMOS 3.3V 130 MHz HCMOS 3.3V K STE CRY -950 D CVH Hz M 130 K STE CRY -950 D H CV MH z 100 4d -16 z /H Bc z /H Bc 8d -16 Model CVHD-950 is a 50 MHz to 130 MHz CMOS Voltage Controlled Crystal Oscillator. High Q crystal and 3rd overtone technology provides Ultra-Low Phase Noise and Low-Jitter performance with a CMOS output. Features include -165 dBc/Hz phase noise floor with 3.3Vdc input voltage, -40°C to +85°C operating temperature, and 9×14 mm SMT package. The oscillator has no sub-harmonics. Applications include High Definition TV, Avionics Low Phase Signal Sources, and Test and Measurement. CRYSTEK CORPORATION Rev: P Date: 08-Jan-2014 Page 1 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CVHD-950 Model 9×14 mm SMD, 3.3V, CMOS Frequency Range: Temperature Range: (Option M) (Option X) Storage: Input Voltage: Input Current: Output: Symmetry: Rise/Fall Time: Logic: 50 MHz to 130 MHz 0°C to +70°C (standard) -20°C to +70°C -40°C to +85°C -45°C to 90°C 3.3V ±0.3V 15mA Typical, 25mA Max CMOS 45/55% Max @ 50%Vdd 3nsec Max @ 20% to 80% Vdd “0” = 10% Vdd Max “1” = 90% Vdd Min 15pF ±24mA Max Load: Output Current: Input: Modulation Bandwidth: >10kHz @ -3dB Impedance: 51 kΩ Control Voltage: 1.65V ±1.65V Tuning Sensitivity: +25ppm/V Typical Frequency Pulling: ±20ppm APR Min Typical Phase Noise: 1kHz -135 dBc/Hz 10kHz -155 dBc/Hz 100kHz -164 dBc/Hz 1MHz -165 dBc/Hz Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J MIL-STD-883, Method 1011, Condition A MIL-STD-883, Method 1004 (Inclusive of frequency stability, calibration, and aging.) Linearity: Phase Jitter (12kHz~80MHz): Phase Noise Floor: Sub-harmonics: Aging: ±10% Max 0.13psec Typical @100MHz -165dBc/Hz Typical, -160dBc/Hz Max None <3ppm 1st year, <1ppm thereafter Part Number Example: CVHD-950X-100.000 = 3.3V, 45/55, -40°C to +85°C (±20ppmAPR), 100 MHz 0.360 (9.14) RECOMMENDED REFLOW SOLDERING PROFILE 0.560 (14.2) CRYSTEK Part Number Frequency Date Code Ramp-Up 3°C/Sec Max. TEMPERATURE 0.560 (14.2) 0.210 (5.3) 260°C Critical Temperature Zone Ramp-Down 6°C/Sec. 217°C 200°C 150°C SUGGESTED PAD LAYOUT Preheat 180 Secs. Max. 8 Minutes Max. 0.050 (1.27) 0.040 (1.01) 0.090 (2.28) 1 260°C for 10 Secs. Max. 2 4 3 90 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. 0.280 (7.11) 0.070 (1.77) 0.200 (5.08) CRYSTEK CORPORATION 0.200 (5.08) Pad 1 2 3 4 Connection Volt Cntrl. GND OUT Vdd Rev: P Date: 08-Jan-2014 Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Crystek: CVHD-950-60.000 CVHD-950-54.000 CVHD-950-50.000 CVHD-950-80.000 CVHD-950-100.000 CVHD-950-76.800 CVHD-950-67.5 CVHD-950-70.000