MVSC Series VCXO RoHS Compliant Hermetically Sealed 3.2 x 2.5 Ceramic SMD Package Two output Frequency options Frequency Stability * Frequency Pull Range Aging (+25°C ±3°C) Per Year Supply Voltage (±10%) Supply Current Pin 1 Control Voltage Linearity Slope Output Type Logic 0 Low Output Logic 1 High Output 27.000MHz & 55.000MHz (See Part Number Guide for Options) ±100ppm min(STD),±150ppm min (Option) ±3ppm max +1.80 VDC +2.50VDC +3.30VDC 10mA max 0.9V ± 0.75V 1.25V ± 1.05V 1.65V ± 1.35V 10% max Positive CMOS 10% Vdd Max 90%Vdd Min Symmetry (50% of waveform) 45% to 55% Rise/Fall Time (10% to 90% of Supply Voltage) Load Capacity Start-up Time Phase Jitter (12KHz—20 MHz) Phase Period Jitter Temperature Operating Range Temperature Storage Range *Inclusive of Temperature, Load and Voltage Environmental & Mechanical Detail Shock MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 5nSec max 15pF 5mSec max 1.0ps max 2.5ps max (See Part Number Guide for Options) -55°C to +125°C Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code YYWW = 4 Digit Date Code (Year / Week) L = Denotes RoHS Compliant Line 2 = SYYWWL Line 3 = XXXXX Internal use only May vary with lots MSL Level 1 per IPC/JEDEC J-STD 20 Black dot to denote Pin 1 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 03/25/11 B Pg 1 of 2 Part Number Guide MVS V C Frequency 3.2 x2.5 Ceramic SMD 4 Pads Symmetry Blank = 40/60% A = 45/55% Output C = CMOS Supply Voltage 3 = +3.3VDC 2 = +2.5VDC 1 = +1.8VDC Frequency Stability 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm 150 = ±150 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Pin 1 Connection V = Voltage Control Pullability B = ±100 ppm C = ±150 ppm Value Added Options Blank = No Added Options T = Tape and Reel Please Consult with MMD Sales Department for any other Parameters or Options Mechanical Details 1.20 [.047] MAX 3.20 [.125] MAX MXX.XXX SYYWWL XXXXX 2.20 [.086] 1.20 [.047] 3 4 2 1 2.50 [.098] MAX 1.00 [.039] 0.65 [.025] 0.90 [.035] 1.70 [.066] 1.20 [.047] DIMENSIONS IN BRACKETS ARE IN INCHES EXTERNAL BYPASS CAPACITOR IS RECOMMENDED PIN CONNECTIONS PIN 1 VOLTAGE CONTROL PIN 2 CASE GROUND PIN 3 OUTPUT PIN 4 SUPPLY VOLTAGE 1.40 [.055] SUGGESTED LAND PATTERN Tape & Reel Dimensions PITCH Tape Width REEL DIA Q1 Q2 Q3 Q4 Q1 Q2 Q3 Q4 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 4.00 [.157] 12.00 [.471] 180 [7.0] 500 Q1 NOTES: UNLE SS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Toleran ces EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Revisions only with customer approval 03/25/11 B Pg 2 of 2