MICROCIRCUIT DATA SHEET Original Creation Date: 10/17/95 Last Update Date: 05/19/97 Last Major Revision Date: 04/02/97 MNMM54C151-X REV 1A0 8-CHANNEL DIGITAL MULTIPLEXER General Description The MM54C151 multiplexer is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. This data selector/multiplexer contains on-chip binary decoding. Two outputs provide true (output Y) and complement (output W) data. A logical "1" on the strobe input forces W to a logical "1" and Y to a logical "0". All inputs are protected against electrostatic effects. Industry Part Number NS Part Numbers MM54C151 MM54C151J/883 MM54C151W/883 Prime Die MM54C151 Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MNMM54C151-X REV 1A0 Features - Supply voltage range Tenth power TTL compatible High noise immunity Low power 3V to 15V drives 2 LPTTL loads 0.45 Vcc (typ.) 50nW (typ.) Applications - Automotive Data terminals Instrumentation Medical electronics Alarm systems Industrial electronics Remote metering Computers 2 MICROCIRCUIT DATA SHEET MNMM54C151-X REV 1A0 (Absolute Maximum Ratings) (Note 1) Voltage at Any Pin -0.3V to Vcc +0.3V Operating Temperature Range -55 C to +125 C Storage Temperature Range -65 C to +150 C Maximum Vcc Voltage 18V Power Dissipation Dual-In-Line Small Outline Operating Vcc Range 700mW 500mW 3V to 15V Lead Temperature (Soldering, 10 seconds) Note 1: 260 C "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. Except for "Operating Temperature Range" they are not meant to imply that the devices should be operated at these limits. The table of "Electrical Characteristics" provides conditions for actual device operation. 3 MICROCIRCUIT DATA SHEET MNMM54C151-X REV 1A0 Electrical Characteristics DC PARAMETERS: SYMBOL Voh Vol Iih Iil Icc Isource PARAMETER Logical "1" Output Voltage Logical "0" Output Voltage Logical "1" Input Current Logical "0" Input Current Quiescent Device Current Output Source Current CONDITIONS NOTES Output Sink Current UNIT SUBGROUPS V 1, 2, 3 Vcc = 10V, Vih = 8V, Vil = 2V, Iout = -10uA 9 V 1, 2, 3 Vcc = 4.5V, Vih = 3V, Vil = 0.8V, Iout = -360uA 2.4 V 1, 2, 3 Vcc = 5V, Vih = 3.5V, Vil = 1.5V, Iout = 10uA 0.5 V 1, 2, 3 Vcc = 10V, Vih = 8V, Vil = 2V, Iout = 10uA 1 V 1, 2, 3 Vcc = 4.5V, Vih = 3V, Vil = 0.8V, Iout = 360uA 0.4 V 1, 2, 3 Vcc = 15V, Vin = 15V, other inputs at 0V 0.15 uA 1, 3 1 uA 2 -0.15 uA 1, 3 -1 uA 2 10 uA 1, 3 300 uA 2 -1.75 mA 1, 3 -1.2 mA 2 -8 mA 1, 3 -5.6 mA 2 1.75 mA 1, 3 1.2 mA 2 8 mA 1, 3 5.6 mA 2 360 uA 1, 2, 3 Vcc = 15V, Vin = 0V, other inputs at 15V Vcc = 15V, Vih = 15V, Vil = 0V Vcc = 5V, Vih = 5V, Vil = 0V, Vout = 0 Vcc = 5V, Vih = 5V, Vil = 0V, Vout = 5V Vcc = 4.5V, Vih = 3V, Vil = 0.8V, Vout = 0.4V Logical "1" Input Voltage MAX 4.5 Vcc = 10V, Vih = 10V, Vil = 0V, Vout = 10V Vih MIN Vcc = 5V, Vih = 3.5V, Vil = 1.5V, Iout = -10uA Vcc = 10V, Vih = 10V, Vil = 0V, Vout = 0 Isink PINNAME Vcc = 5V 1 3.5 V 1, 2, 3 Vcc = 10V 1 8 V 1, 2, 3 Vcc = 4.5V, (LP to CMOS) 1 3 V 1, 2, 3 Vcc = 4.5V, (CMOS to LP) 1 4 V 1, 2, 3 4 MICROCIRCUIT DATA SHEET MNMM54C151-X REV 1A0 Electrical Characteristics DC PARAMETERS:(Continued) SYMBOL Vil Pd PARAMETER Logical "0" Input Voltage Power Dissipation CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS Vcc = 5V 1 1.5 V 1, 2, 3 Vcc = 10V 1 2 V 1, 2, 3 Vcc = 4.5V, (LP to CMOS) 1 0.8 V 1, 2, 3 Vcc = 4.5V, (CMOS to LP) 1 1 V 1, 2, 3 Vcc = 15V 1 150 uW 1, 3 1 4500 uW 2 AC PARAMETERS: (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF tPHL Propagation Delay Time: Data to Y Vcc = 5V Vcc = 10V tPLH Propagation Delay Time: Data to Y Vcc = 5V Vcc = 10V tPHL Propagation Delay Time: Data to W Vcc = 5V Vcc = 10V 5 3 270 nS 9 3 460 nS 10 3 215 nS 11 2 130 nS 9 2 180 nS 10 2 105 nS 11 3 270 nS 9 3 460 nS 10 3 215 nS 11 2 130 nS 9 2 180 nS 10 2 105 nS 11 3 300 nS 9 3 420 nS 10 3 240 nS 11 2 140 nS 9 2 195 nS 10 2 110 ns 11 MICROCIRCUIT DATA SHEET MNMM54C151-X REV 1A0 Electrical Characteristics AC PARAMETERS:(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Cl = 50pF SYMBOL tPLH PARAMETER Propagation Delay Time: Data to W CONDITIONS NOTES Vcc = 5V Vcc = 10V tPHL Propagation Delay Time: Select To Y Vcc = 5V Vcc = 10V tPLH Propagation Delay Time: Select To Y Vcc = 5V Vcc = 10V tPHL Propagation Delay Time: Strobe To Y Vcc = 5V Vcc = 10V tPLH Propagation Delay Time: Strobe To Y Vcc = 5V Vcc = 10V Note 1: Parameter tested go-no-go only. 6 PINNAME MIN MAX UNIT SUBGROUPS 3 300 nS 9 3 420 nS 10 3 240 nS 11 2 140 nS 9 2 195 nS 10 2 110 nS 11 3 360 nS 9 3 505 nS 10 3 290 nS 11 2 170 nS 9 2 240 nS 10 2 135 nS 11 3 360 nS 9 3 505 nS 10 3 290 nS 11 2 170 nS 9 2 240 nS 10 2 135 nS 11 3 360 nS 9 3 505 nS 10 3 290 nS 11 2 170 nS 9 2 240 nS 10 2 135 nS 11 3 360 nS 9 3 505 nS 10 3 290 nS 11 2 170 nS 9 2 240 nS 10 2 135 nS 11 MICROCIRCUIT DATA SHEET MNMM54C151-X REV 1A0 (Continued) Note 2: Note 3: Guaranteed parameter not tested. Tested at 25 C; guaranteed but not tested at +125 C and -55 C. 7