EC76SMCJxx Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Stand-off Voltage 5.0 to 440V Features EC76SMCJ5.0 thru 440 ■ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ■ Low profile package with built-in strain relief for surface mounted applications ■ Glass passivated junction ■ Low incremental surge resistance, excellent clamping capability ■ 1500W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle): 0.01% ■ Very fast response time ■ High temperature soldering guaranteed: 250℃ /10 seconds at terminals Mechanical Date ■ Case: JEDEC DO-214AB(SMC J-Bend) molded plastic over passivated junction ■ Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 ■ Polarity: For unidirectional types the band denotes the cathode, which is positive with respect to the anode under normal TVS operation ■ Weight: 0.007oz., 0.21g Absolute Maximum Ratings (Ratings at 25℃ambient temperature unless otherwise specified.) Parameter (1,2) Peak pulse power dissipation with a 10/1000 us waveform (see Fig. 1) (1) Peak pulse current with a 10/1000 us waveform (2) Peak forward surge current 8.3ms single half sine-wave uni-directional only (4) Typical thermal resistance, junction to ambient Typical thermal resistance, junction to lead Operating junction and storage temperature range Symbol PPPM IPPM IFSM RθJA RθJL TJ,TSTG Value Minimum 1500 See Next Table 200 75 15 -55 to +150 Unit W A A ℃/W ℃/W ℃ Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above T A=25℃ per Fig. 2. 2. Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal 3. Mounted on minimum recommended pad layout E-CMOS Corp. (www.ecmos.com.tw) Page 1 of 6 5EC04N Rev.F001 EC76SMCJxx Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Stand-off Voltage 5.0 to 440V Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. V F=3.5V at IF=100A (uni-directional only) Device type Device marking code Breakdown voltage V (BR) (Volts)(1) Min. Max. Test current at IT (mA) Stand-off voltage VWM (Volts) Maximum reverse leakage at VWM ID (uA) (3) Maximum peak pulse surge current IPPM (A) (2) Maximum clamping voltage at IPPM VC (Volts) UNI BI EC76SMCJ5.0 GDD BDD 6.40 7.82 10 5.0 1000 156.3 EC76SMCJ5.0A GDE BDE 6.40 7.07 10 5.0 1000 163.0 9.2 EC76SMCJ6.0 GDF BDF 6.67 8.15 10 6.0 1000 131.6 11.4 EC76SMCJ6.0A GDG BDG 6.67 7.37 10 6.0 1000 145.6 10.3 EC76SMCJ6.5 GDH BDH 7.22 8.82 10 6.5 500 122.0 12.3 EC76SMCJ6.5A GDK BDK 7.22 7.98 10 6.5 500 133.9 11.2 EC76SMCJ7.0 GDL BDL 7.78 9.51 10 7.0 200 112.8 13.3 EC76SMCJ7.0A GDL BDM 7.78 8.60 10 7.0 200 125.0 12.0 EC76SMCJ7.5 GDN BDN 8.33 10.2 1.0 7.5 100 104.9 14.3 EC76SMCJ7.5A GDP BDP 8.33 9.21 1.0 7.5 100 116.3 12.9 EC76SMCJ8.0 GDQ BDQ 8.89 10.9 1.0 8.0 50 100.0 15.0 EC76SMCJ8.0A GDR BDR 8.89 9.83 1.0 8.0 50 110.3 13.6 EC76SMCJ8.5 GDS BDS 9.44 11.5 1.0 8.5 20 94.3 15.9 EC76SMCJ8.5A GDT BDT 9.44 10.4 1.0 8.5 20 104.2 14.4 EC76SMCJ9.0 GDU BDU 10.0 12.2 1.0 9.0 10.0 88.8 16.9 9.6 EC76SMCJ9.0A GDV BDV 10.0 11.1 1.0 9.0 10.0 97.4 15.4 EC76SMCJ10 GDW BDW 11.1 13.6 1.0 10 5.0 79.8 18.8 EC76SMCJ10A GDX BDX 11.1 12.3 1.0 10 5.0 88.2 17.0 EC76SMCJ11 GDY BDY 12.2 14.9 1.0 11 5.0 74.6 20.1 EC76SMCJ11A GDZ BDZ 12.2 13.5 1.0 11 5.0 82.4 18.2 EC76SMCJ12 GED BED 13.3 16.3 1.0 12 5.0 68.2 22.0 EC76SMCJ12A GEE BEE 13.3 14.7 1.0 12 5.0 75.4 19.9 EC76SMCJ13 GEF BEF 14.4 17.6 1.0 13 1.0 63.0 23.8 EC76SMCJ13A GEG BEG 14.4 15.9 1.0 13 1.0 69.8 21.5 EC76SMCJ14 GEH BEH 15.6 19.1 1.0 14 1.0 58.1 25.8 EC76SMCJ14A GEK BEK 15.6 17.2 1.0 14 1.0 64.7 23.2 EC76SMCJ15 GEL BEL 16.7 20.4 1.0 15 1.0 55.8 26.9 EC76SMCJ15A GEM BEM 16.7 18.5 1.0 15 1.0 61.5 24.4 EC76SMCJ16 GEN BEN 17.8 21.8 1.0 16 1.0 52.1 28.8 EC76SMCJ16A GEP BEP 17.8 19.7 1.0 16 1.0 57.7 26.0 EC76SMCJ17 GEQ BEQ 18.9 23.1 1.0 17 1.0 49.2 30.5 EC76SMCJ17A GER BER 18.9 20.9 1.0 17 1.0 54.3 27.6 EC76SMCJ18 GES BES 20.0 24.4 1.0 18 1.0 46.6 32.2 EC76SMCJ18A GET BET 20.0 22.1 1.0 18 1.0 51.4 29.2 EC76SMCJ20 GEU BEU 22.2 27.1 1.0 20 1.0 41.9 35.8 EC76SMCJ20A GEV BEV 22.2 24.5 1.0 20 1.0 46.3 32.4 EC76SMCJ22 GEW BEW 24.4 29.8 1.0 22 1.0 38.1 39.4 EC76SMCJ22A GEX BEX 24.4 26.9 1.0 22 1.0 42.3 35.5 EC76SMCJ24 GEY BEY 26.7 32.6 1.0 24 1.0 34.9 43.0 EC76SMCJ24A GEZ BEZ 26.7 29.5 1.0 24 1.0 38.6 38.9 EC76SMCJ26 GFD BFD 28.9 35.3 1.0 26 1.0 32.2 46.6 EC76SMCJ26A GFE BFE 28.9 31.9 1.0 26 1.0 35.6 42.1 E-CMOS Corp. (www.ecmos.com.tw) Page 2 of 6 5EC04N Rev.F001 Surface Mount Transient Voltage Suppressors EC76SMCJxx Peak Pulse Power 1500W Stand-off Voltage 5.0 to 440V Device type Device marking code UNI Breakdown voltage V (BR) (Volts)(1) BI Min. Max. Test current at IT (mA) Stand-off voltage VWM (Volts) Maximum reverse leakage at VWM ID (uA) (3) Maximum peak pulse surge current IPPM (A) (2) Maximum clamping voltage at IPPM VC (Volts) EC76SMCJ28 GFF BFF 31.1 38.0 1.0 28 1.0 30.0 50.0 EC76SMCJ28A GFG BFG 31.1 34.4 1.0 28 1.0 33.0 45.4 EC76SMCJ30 GFH BFH 33.3 40.7 1.0 30 1.0 28.0 53.5 EC76SMCJ33 GFL BFL 36.7 44.9 1.0 33 1.0 25.4 59.0 EC76SMCJ33A GFM BFM 36.7 40.6 1.0 33 1.0 28.1 53.3 EC76SMCJ36 GFN BFN 40.0 48.9 1.0 36 1.0 23.3 64.3 EC76SMCJ36A GFP BFP 40.0 44.2 1.0 36 1.0 25.8 58.1 EC76SMCJ40 BFQ BFQ 44.4 54.3 1.0 40 1.0 21.0 71.4 EC76SMCJ40A GFR BFR 44.4 49.1 1.0 40 1.0 23.3 64.5 EC76SMCJ43 GFS BFS 47.8 58.4 1.0 43 1.0 19.6 76.7 EC76SMCJ43A GFT BFT 47.8 52.8 1.0 43 1.0 21.6 69.4 EC76SMCJ45 GFU BFU 50.0 61.1 1.0 45 1.0 18.7 80.3 EC76SMCJ45A GFV BFV 50.0 55.3 1.0 45 1.0 20.6 72.7 EC76SMCJ48 GFW BFW 53.3 65.1 1.0 48 1.0 17.5 85.5 EC76SMCJ48A GFX BFX 53.3 58.9 1.0 48 1.0 19.4 77.4 EC76SMCJ51 GFY BFY 56.7 69.3 1.0 51 1.0 16.5 91.1 EC76SMCJ51A GFZ BFZ 56.7 62.7 1.0 51 1.0 18.2 82.4 EC76SMCJ54 GGD BGD 60.0 73.3 1.0 54 1.0 15.6 96.3 GGEE BGE 60.0 66.3 1.0 54 1.0 17.2 87.1 103 EC76SMCJ54A EC76SMCJ58 GGF BGF 64.4 78.7 1.0 58 1.0 14.6 EC76SMCJ58A GGG BGG 64.4 71.2 1.0 58 1.0 16.0 93 EC76SMCJ60 GGH BGH 66.7 81.5 1.0 60 1.0 14.0 107 EC76SMCJ60A GGK BGK 66.7 73.7 1.0 60 1.0 15.5 96 EC76SMCJ64 GGL BGL 71.1 86.9 1.0 64 1.0 13.2 114 EC76SMCJ64A GGM BGM 71.1 78.6 1.0 64 1.0 14.6 103 EC76SMCJ70 GGN BGN 77.8 95.1 1.0 70 1.0 12 125 EC76SMCJ70A GGP BGP 77.8 86.0 1.0 70 1.0 13.3 113 EC76SMCJ75 GGQ BGQ 83.3 102 1.0 75 1.0 11.2 134 EC76SMCJ75A GGR BGR 83.3 92.1 1.0 75 1.0 12.4 121 EC76SMCJ78 GGS BGS 86.7 106 1.0 78 1.0 10.8 139 EC76SMCJ78A GGT BGT 86.7 95.8 1.0 78 1.0 11.9 126 EC76SMCJ85 GGU BGU 94.4 115 1.0 85 1.0 9.9 151 EC76SMCJ85A GGV BGV 94.4 104 1.0 85 1.0 10.9 137 EC76SMCJ90 GGW BGW 100 122 1.0 90 1.0 9.4 160 EC76SMCJ90A GGX BGX 100 111 1.0 90 1.0 10.3 146 EC76SMCJ100 GGY BGY 111 136 1.0 100 1.0 8.4 179 EC76SMCJ100A GGZ BGZ 111 123 1.0 100 1.0 9.3 162 EC76SMCJ110 GHD BHD 122 149 1.0 110 1.0 7.7 196 EC76SMCJ110A GHE BHE 122 135 1.0 110 1.0 8.5 177 EC76SMCJ120 GHF BHF 133 163 1.0 120 1.0 7.0 214 EC76SMCJ120A GHG BHG 133 147 1.0 120 1.0 7.8 193 EC76SMCJ130 GHH BHH 144 176 1.0 130 1.0 6.5 231 EC76SMCJ130A GHK BHK 144 159 1.0 130 1.0 7.2 209 EC76SMCJ150 GHL BHL 167 204 1.0 150 1.0 5.6 268 EC76SMCJ150A GHM BHM 167 185 1.0 150 1.0 6.2 243 EC76SMCJ160 GHN BHN 178 218 1.0 160 1.0 5.2 287 EC76SMCJ160A GHP BHP 178 197 1.0 160 1.0 5.8 259 E-CMOS Corp. (www.ecmos.com.tw) Page 3 of 6 5EC04N Rev.F001 EC76SMCJxx Surface Mount Transient Voltage Suppressors Peak Pulse Power 1500W Stand-off Voltage 5.0 to 440V Device marking code Breakdown voltage V (BR) (Volts)(1) Stand-off voltage VWM (Volts) Maximum reverse leakage at VWM ID (uA) (3) Maximum peak pulse surge current IPPM (A) (2) Maximum clamping voltage at IPPM VC (Volts) UNI BI Min. Max. Test current at IT (mA) EC76SMCJ170 GHQ BHQ 189 231 1.0 170 1.0 4.9 304 EC76SMCJ170A GHR BHR 189 209 1.0 170 1.0 5.5 275 EC76SMCJ180A GHT BHT 201 222 1.0 180 1.0 5.0 292 EC76SMCJ200A GHV BHV 224 247 1.0 200 1.0 4.6 324 EC76SMCJ220A GHX BHX 246 272 1.0 220 1.0 4.2 356 EC76SMCJ250A GHZ BHZ 279 309 1.0 250 1.0 3.7 405 EC76SMCJ300A GJE BJE 335 371 1.0 300 1.0 3.1 486 EC76SMCJ350A GJG BJG 391 432 1.0 350 1.0 2.6 567 EC76SMCJ400A GJK BJK 447 494 1.0 400 1.0 2.3 648 EC76SMCJ440A GJM BJM 492 543 1.0 440 1.0 2.1 713 Device type Notes: 1. V(BR) measured after IT applied for 300us square wave pulse or equivalent 2. Surge current waveform per Fig. 3 and derate per Fig. 2 3. For bi-directional types having VWM of 10 Volts and less, the ID limit is doubled 4. All terms and symbols are consistent with ANSI/IEEE C62.35 5. For parts without A, the VBR is +10% E-CMOS Corp. (www.ecmos.com.tw) Page 4 of 6 5EC04N Rev.F001 Surface Mount Transient Voltage Suppressors EC76SMCJxx Peak Pulse Power 1500W Stand-off Voltage 5.0 to 440V Typical Performance Curves Fig.1 Peak Pulse Power Rating Curve Fig.3 Pulse Waveform Fig.2 Pulse Derating Curve Fig.4 Typical Junction Capacitance Uni-Directional Fig.5 Typical Transient Thermal Impedance Fig.6 Maximum Non-Repetitive Forward Surge Current Uni-Directional Use Only E-CMOS Corp. (www.ecmos.com.tw) Page 5 of 6 5EC04N Rev.F001 Surface Mount Transient Voltage Suppressors EC76SMCJxx Peak Pulse Power 1500W Stand-off Voltage 5.0 to 440V Order Information EC76SMCJ xx C A Stand off Voltage 5% Voltage Tolerance Bi-directional Device EC76SMCJXX Package Net Weight Carrier Quantity HSF Status DO-214AB(SMC) 0.21g Tape & Reel 3000pcs/reel RoHS compliant Product Dimension Package Information Marking E-CMOS Corp. (www.ecmos.com.tw) Page 6 of 6 5EC04N Rev.F001