N Not Intended For New Designs Comlinear CLC200 Fast Settling, Wideband Operational Amplifiers General Description Features ■ ■ ■ ■ ■ -3dB bandwidth of 95MHz 0.1% settling in 18ns 4000V/µs slew rate Low distortion, linear phase 3.6ns rise and fall times Applications ■ ■ ■ ■ ■ ■ Fast, precision A to D, D to A conversion Baseband and video communications Radar, sonar, IF processors Laser drivers, photodiode preamps High-density buffering Graphic CRT composite video drive amp Comlinear CLC200 Fast Settling, Wideband Operational Amplifiers August 1996 Bottom View The CLC200 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions: CLC200AI -25°C to +85°C CLC200A8C -55°C to +125°C CLC200AK -55°C to +125°C CLC200AM -55°C to +125°C 12-pin TO-8 can 12-pin TO-8 can, MIL-STD-883, Level B 12-pin TO-8 can, features burn-in and hermetic testing 12-pin TO-8 can, screened to Comlinear’s M std. for high reliability DESC SMD number: 5962-89910 Package Dimensions Typical Performance © 1996 National Semiconductor Corporation Printed in the U.S.A. http://www.national.com CLC200 Electrical Characteristics (Av = +20,Vcc = +5V, RL = 200Ω, Rf = 2000Ω; unless specified) Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Absolute Maximum Ratings http://www.national.com 2 CLC200 Typical Performance Characteristics (TA = +25°, Av = +20, VCC = ±5V, RL = 200W; unless specified) 3 http://www.national.com http://www.national.com 4 This page intentionally left blank. 5 http://www.national.com Comlinear CLC200 Fast Settling, Wideband Operational Amplifiers Customer Design Applications Support National Semiconductor is committed to design excellence. For sales, literature and technical support, call the National Semiconductor Customer Response Group at 1-800-272-9959 or fax 1-800-737-7018. Life Support Policy National’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of National Semiconductor Corporation. As used herein: 1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. N National Semiconductor Corporation National Semiconductor Europe National Semiconductor Hong Kong Ltd. National Semiconductor Japan Ltd. 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 Fax: (+49) 0-180-530 85 86 E-mail: europe.support.nsc.com Deutsch Tel: (+49) 0-180-530 85 85 English Tel: (+49) 0-180-532 78 32 Francais Tel: (+49) 0-180-532 93 58 Italiano Tel: (+49) 0-180-534 16 80 13th Floor, Straight Block Ocean Centre, 5 Canton Road Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. http://www.national.com 6 Lit #150200-005