Renesas HD74LV1GT00ACME 2â input nand gate / cmos logic level shifter Datasheet

To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
HD74LV1GT00A
2–input NAND Gate / CMOS Logic Level Shifter
REJ03D0115-0900
Rev.9.00
Mar 21, 2008
Description
The HD74LV1GT00A is high-speed CMOS two input NAND gate using silicon gate CMOS process. With CMOS low
power dissipation, it provides high-speed equivalent to LS–TTL series. The internal circuit of three stages construction
with buffer provides wide noise margin and stable output. The input protection circuitry on this device allows over
voltage tolerance on the input, allowing the device to be used as a logic–level translator from 3.0 V CMOS Logic to 5.0
V CMOS Logic or from 1.8 V CMOS logic to 3.0 V CMOS Logic while operating at the high-voltage power supply.
Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the
low power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• TTL compatible input level.
Supply voltage range : 3.0 to 5.5 V
Operating temperature range : –40 to +85°C
• Logic-level translate function
3.0 V CMOS logic → 5.0 V CMOS logic (@VCC = 5.0 V)
1.8 V or 2.5 V CMOS logic → 3.3 V CMOS logic (@VCC = 3.3 V)
• All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V)
All outputs VO (Max.) = 5.5 V (@VCC = 0 V)
• Output current ±6 mA (@VCC = 3.0 V to 3.6 V), ±12 mA (@VCC = 4.5 V to 5.5 V)
• All the logical input has hysteresis voltage for the slow transition.
• Ordering Information
Part Name
Package Type
HD74LV1GT00ACME
CMPAK–5 pin
HD74LV1GT00AVSE
VSON–5 pin
Note:
Package Code
(Previous Code)
PTSP0005ZC-A
(CMPAK-5V)
PUSN0005KA-A
(TNP-5DV)
Please consult the sales office for the above package availability.
REJ03D0115-0900 Rev.9.00, Mar 21, 2008
Page 1 of 6
Package
Abbreviation
Taping Abbreviation
(Quantity)
CM
E (3000 pcs/reel)
VS
E (3000 pcs/reel)
HD74LV1GT00A
Outline and Article Indication
• HD74LV1GT00A
Index band
Marking
T
1
= Control code
CMPAK–5
• HD74LV1GT00A
Marking
T
1
= Control code
VSON–5
Function Table
Inputs
A
L
L
H
H
H : High level
L : Low level
REJ03D0115-0900 Rev.9.00, Mar 21, 2008
Page 2 of 6
B
L
H
L
H
Output Y
H
H
H
L
HD74LV1GT00A
Pin Arrangement
IN B
1
IN A
2
GND
3
5
VCC
4
OUT Y
(Top view)
Absolute Maximum Ratings
Item
Supply voltage range
Symbol
VCC
Ratings
–0.5 to 7.0
Unit
V
Input voltage range *1
VI
V
Output voltage range *1, 2
VO
Input clamp current
Output clamp current
Continuous output current
IIK
IOK
IO
–0.5 to 7.0
–0.5 to VCC + 0.5
–0.5 to 7.0
–20
±50
±25
mA
mA
mA
ICC or IGND
±50
mA
PT
200
mW
Tstg
–65 to 150
°C
Continuous current through
VCC or GND
Maximum power dissipation
*3
at Ta = 25°C (in still air)
Storage temperature
Notes:
V
Test Conditions
Output : H or L
VCC : OFF
VI < 0
VO < 0 or VO > VCC
VO = 0 to VCC
The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two
of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are
observed.
2. This value is limited to 5.5 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Recommended Operating Conditions
Item
Supply voltage range
Input voltage range
Output voltage range
Symbol
VCC
VI
VO
IOL
Output current
IOH
Input transition rise or fall rate
∆t / ∆v
Operating free-air temperature
Ta
Note:
Min
3.0
0
0
—
—
—
Max
5.5
5.5
VCC
6
12
–6
—
0
0
–40
–12
100
20
85
Unused or floating inputs must be held high or low.
REJ03D0115-0900 Rev.9.00, Mar 21, 2008
Page 3 of 6
Unit
V
V
V
mA
ns / V
°C
Conditions
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
VCC = 3.0 to 3.6 V
VCC = 4.5 to 5.5 V
HD74LV1GT00A
Electrical Characteristic
• Ta = –40 to 85°C
Item
Symbol
VOH
VCC (V) *
3.0 to 3.6
4.5 to 5.5
3.0 to 3.6
4.5 to 5.5
3.3
5.0
Min to Max
3.0
Min
1.5
2.0
—
—
—
—
VCC–0.1
2.48
Typ
—
—
—
—
0.10
0.15
—
—
Max
—
—
0.6
0.8
—
—
—
—
VOL
4.5
Min to Max
3.0
3.8
—
—
—
—
—
—
0.1
0.44
Input current
IIN
4.5
0 to 5.5
—
—
—
—
0.55
±1
µA
Quiescent
supply current
ICC
5.5
—
—
10
µA
∆ICC
5.5
—
—
1.5
mA
IOFF
CIN
0
5.0
—
—
—
2.5
5
—
µA
pF
VIH
Input voltage
VIL
Hysteresis voltage
VH
Output voltage
Output leakage current
Input capacitance
Note:
Unit
Test condition
V
VT+ – VT–
V
V
IOH = –50 µA
IOH = –6 mA
IOH = –12 mA
IOL = 50 µA
IOL = 6 mA
IOL = 12 mA
VIN = 5.5 V or GND
VIN = VCC or GND,
IO = 0
One input VIN = 3.4 V,
other input VCC or GND
VIN or VO = 0 to 5.5 V
VIN = VCC or GND
For conditions shown as Min or Max, use the appropriate values under recommended operating conditions.
Switching Characteristics
• VCC = 3.3 ± 0.3 V
Item
Symbol
Propagation
delay time
tPLH
tPHL
Ta = 25°C
Typ
Max
7.0
10.0
7.5
12.0
Ta = –40 to 85°C
Ta = 25°C
Min
Typ
Max
Ta = –40 to 85°C
Min
—
—
Min
1.0
1.0
Max
12.0
14.0
Unit
ns
Test
Conditions
CL = 15 pF
CL = 50 pF
FROM
(Input)
TO
(Output)
A or B
Y
FROM
(Input)
TO
(Output)
A or B
Y
• VCC = 5.0 ± 0.5 V
Item
Symbol
Propagation
delay time
tPLH
tPHL
—
—
5.0
5.5
Min
Max
6.9
7.9
1.0
1.0
8.0
9.0
Min
Ta = 25°C
Typ
Max
—
11.0
—
Unit
ns
Test
Conditions
CL = 15 pF
CL = 50 pF
Operating Characteristics
• CL = 50 pF
Item
Power dissipation
capacitance
Symbol
VCC (V)
CPD
5.0
REJ03D0115-0900 Rev.9.00, Mar 21, 2008
Page 4 of 6
Unit
pF
Test Conditions
f = 10 MHz
HD74LV1GT00A
Test Circuit
VCC
Output
Input
Pulse
generator
50 Ω
CL
Note: CL includes probe and jig capacitance.
Waveforms
tr
tf
90%
Input
VI
90%
Vref
Vref
10%
10%
GND
VOH
50%
Output
50%
VOL
t PLH
t PHL
INPUTS
VCC (V)
VI
3.3±0.3
5.0±0.5
Vref
tr / tf
2.5 V ≤ 3.0 ns
50%
≤ 3.0 ns
1.5 V
3V
Notes: 1. Input waveform : PRR ≤ 1 MHz, Zo = 50 Ω.
2. The output are measured one at a time with one transition per measurement.
REJ03D0115-0900 Rev.9.00, Mar 21, 2008
Page 5 of 6
HD74LV1GT00A
Package Dimensions
JEITA Package Code
RENESAS Code
SC-88A
Previous Code
PTSP0005ZC-A
MASS[Typ.]
CMPAK-5 / CMPAK-5V
D
0.006g
A
e
Q
c
E
HE
LP
L
A
A
x M
L1
S
Reference
Symbol
A3
b
A
A
A1
A2
A3
b
b1
c
c1
D
E
e
e
A2
A
A1
y S
S
e1
HE
L
L1
LP
x
y
b
b1
l1
c1
c
b2
A-A Section
JEITA Package Code
P-USON5-1.2x1.6-0.50
Pattern of terminal position areas
RENESAS Code
PUSN0005KA-A
Previous Code
TNP-5D/TNP-5DV
Dimension in Millimeters
Min
0.8
0
0.8
0.15
0.1
1.8
1.15
1.8
0.3
0.1
0.2
Nom
0.9
0.25
0.22
0.2
0.13
0.11
2.0
1.25
0.65
2.1
b2
e1
1.5
l1
Q
0.25
Max
1.1
0.1
1.0
0.3
0.15
2.2
1.35
2.4
0.7
0.5
0.6
0.05
0.05
0.35
0.9
MASS[Typ.]
0.002g
D
L1
1.0 ±0.1
4
( 0.1 )
HE
E
( 0.1 )
5
1
3
A
c
e
b
REJ03D0115-0900 Rev.9.00, Mar 21, 2008
Page 6 of 6
Reference Dimension in Millimeters
Symbol
D
E
A
A1
A2
b
b1
e
Lp
x
y
ZD
c
c1
HE
L1
Min Nom Max
1.55 1.6 1.65
1.1 1.2 1.3
0.6
0.15
0.2
0.3
0.5
0.07 0.12 0.22
1.55
1.6
0.2
1.65
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2377-3473
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.2
Similar pages