Vishay MBR3045CTPBF Schottky rectifier, 2 x 15 a Datasheet

MBR30..CTPbF Series
Vishay High Power Products
Schottky Rectifier, 2 x 15 A
FEATURES
• 150 °C TJ operation
• Center tap TO-220, D2PAK and TO-262
Pb-free
Available
packages
• Low forward voltage drop
RoHS*
COMPLIANT
• High frequency operation
• High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
• Guard ring for enhanced ruggedness and long term
reliability
• Lead (Pb)-free (“PbF” suffix)
• Designed and qualified for industrial level
Base 2
common
cathode
Anode
2
1 Common 3
cathode
Anode
TO-220AB
DESCRIPTION
PRODUCT SUMMARY
IF(AV)
2 x 15 A
VR
35/45 V
IRM
100 mA at 125 °C
This center tap Schottky rectifier has been optimized for low
reverse leakage at high temperature. The proprietary barrier
technology allows for reliable operation up to 150 °C junction
temperature. Typical applications are in switching power
supplies, converters, freewheeling diodes, and reverse
battery protection.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL
CHARACTERISTICS
VALUES
UNITS
30
A
35/45
V
Rectangular waveform (per device)
IF(AV)
VRRM
IFRM
TC = 123 °C (per leg)
IFSM
tp = 5 µs sine
VF
20 Apk, TJ = 125 °C
TJ
Range
30
A
1020
0.6
V
- 65 to 150
°C
MBR3035CTPbF
MBR3045CTPbF
UNITS
35
45
V
VOLTAGE RATINGS
PARAMETER
SYMBOL
Maximum DC reverse voltage
VR
Maximum working peak reverse voltage
VRWM
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Maximum average
forward current
SYMBOL
per leg
per device
Peak repetitive forward current per leg
TEST CONDITIONS
Non-repetitive peak surge current
TC = 123 °C, rated VR
IFRM
Rated VR, square wave, 20 kHz, TC = 123 °C
Non-repetitive avalanche energy per leg
Repetitive avalanche current per leg
IFSM
UNITS
15
IF(AV)
5 µs sine or 3 µs rect. pulse
VALUES
30
Following any rated load
condition and with rated
VRRM applied
30
A
1020
Surge applied at rated load conditions halfwave,
single phase, 60 Hz
200
EAS
TJ = 25 °C, IAS = 2 A, L = 5 mH
10
mJ
IAR
Current decaying linearly to zero in 1 µs
Frequency limited by TJ maximum VA = 1.5 x VR typical
2
A
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 94292
Revision: 13-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
1
MBR30..CTPbF Series
Vishay High Power Products Schottky Rectifier, 2 x 15 A
ELECTRICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
30 A
VFM (1)
Maximum forward voltage drop
TJ = 25 °C
20 A
TJ = 125 °C
30 A
Maximum instantaneous reverse current
IRM (1)
Threshold voltage
VF(TO)
Forward slope resistance
rt
TJ = 25 °C
Rated DC voltage
TJ = 125 °C
TJ = TJ maximum
VALUES
UNITS
0.76
V
0.6
0.72
1
100
mA
0.29
V
13.6
mΩ
Maximum junction capacitance
CT
VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C
800
pF
Typical series inductance
LS
Measured from top of terminal to mounting plane
8.0
nH
10 000
V/µs
VALUES
UNITS
Maximum voltage rate of change
dV/dt
Rated VR
Note
(1) Pulse width < 300 µs, duty cycle < 2 %
THERMAL - MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
Maximum junction temperature range
TJ
- 65 to 150
Maximum storage temperature range
TStg
- 65 to 175
Maximum thermal resistance,
junction to case per leg
RthJC
DC operation
1.5
Typical thermal resistance,
case to heatsink
RthCS
Mounting surface, smooth and greased
Only for TO-220
0.50
Maximum thermal resistance,
junction to ambient
RthJA
DC operation
For D2PAK and TO-262
Approximate weight
Mounting torque
Marking device
www.vishay.com
2
minimum
maximum
Non-lubricated threads
Case style TO-220AB
For technical questions, contact: [email protected]
°C
°C/W
50
2
g
0.07
oz.
6 (5)
kgf · cm
(lbf · in)
12 (10)
MBR3045CT
Document Number: 94292
Revision: 13-Aug-08
MBR30..CTPbF Series
IF - Instantaneous Forward Current (A)
Schottky Rectifier, 2 x 15 A Vishay High Power Products
100
10
IR - Reverse Current (mA)
1000
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
TJ = 150 °C
100
10
TJ = 100 °C
TJ = 125 °C
1
TJ = 75 °C
TJ = 50 °C
0.1
0.01
TJ = 25 °C
1
0.001
0
0.3
0.6
1.2
0.9
0
1.5
10
20
30
40
50
VFM - Forward Voltage Drop (V)
VR - Reverse Voltage (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
(Per Leg)
Fig. 2 - Typical Values of Reverse Current vs.
Reverse Voltage (Per Leg)
CT - Junction Capacitance (pF)
1000
TJ = 25 °C
100
10
0
20
30
40
50
VR - Reverse Voltage (V)
ZthJC - Thermal Impedance (°C/W)
Fig. 3 - Typical Junction Capacitance vs.
Reverse Voltage (Per Leg)
10
1
0.1
Single pulse
(thermal resistance)
0.01
0.00001
0.0001
0.001
PDM
D = 0.75
D = 0.50
D = 0.33
D = 0.25
D = 0.20
0.01
t1
t2
Notes:
1. Duty factor D = t1/t2
2. Peak TJ = PDM x ZthJC + TC
0.1
1
10
100
t1 - Rectangular Pulse Duration (s)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg)
Document Number: 94292
Revision: 13-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
3
MBR30..CTPbF Series
Vishay High Power Products Schottky Rectifier, 2 x 15 A
15
140
Average Power Loss (W)
Allowable Case Temperature (°C)
150
DC
130
Square wave (D = 0.50)
Rated VR applied
120
110
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
12
9
RMS limit
6
DC
3
See note (1)
0
100
0
5
10
15
20
5
0
25
10
15
20
25
Fig. 5 - Maximum Allowable Case Temperature vs.
Average Forward Current (Per Leg)
Fig. 6 - Forward Power Loss Characteristics (Per Leg)
IFSM - Non-Repetitive Surge Current (A)
IF(AV) - Average Forward Current (A)
IF(AV) - Average Forward Current (A)
1000
At any rated load condition
and with rated VRRM applied
following surge
100
10
100
1000
10 000
tp - Square Wave Pulse Duration (µs)
Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)
Note
(1) Formula used: T = T - (Pd + Pd
C
J
REV) x RthJC;
Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6);
PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 94292
Revision: 13-Aug-08
MBR30..CTPbF Series
Schottky Rectifier, 2 x 15 A Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
MBR
30
45
CT
PbF
1
2
3
4
5
1
-
Schottky MBR series
2
-
Current rating (30 = 30 A)
3
-
Voltage ratings
4
-
CT = Essential part number
5
-
35 = 35 V
45 = 45 V
None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95222
Part marking information
http://www.vishay.com/doc?95225
Document Number: 94292
Revision: 13-Aug-08
For technical questions, contact: [email protected]
www.vishay.com
5
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
Similar pages