SBR10100CT SBR10100CTFP 10A SBR® SUPER BARRIER RECTIFIER NEW PRODUCT Features • • • • • Mechanical Data • • Low Forward Voltage Drop Excellent High Temperature Stability Patented Super Barrier Rectifier Technology Soft, Fast Switching Capability Lead Free Finish, RoHS Compliant (Note 2) Case: TO-220AB, ITO-220AB Case Material: Molded Plastic, UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020D Terminals: Matte Tin Finish annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 2 Ordering Information: See Page 2 Weight: 2.1 grams TO-220AB (approximate) 1.9 grams ITO-220AB (approximate) • • • • • TO-220AB Maximum Ratings ITO-220AB Package Pin Out Configuration @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = 115ºC Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Peak Repetitive Reverse Surge Current (2uS-1Khz) Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 100 V 71 10 V A IFSM 120 A IRRM 2 A Symbol Value Unit RθJC 2 4 -65 to +150 ºC/W Thermal Characteristics Characteristic Maximum Thermal Resistance (per leg) Package = TO-220AB Package = ITO-220AB Operating and Storage Temperature Range Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) TJ, TSTG @TA = 25°C unless otherwise specified Symbol V(BR)R Min 100 Forward Voltage Drop VF - Leakage Current (Note 1) IR - Notes: ºC Typ 0.64 Max 0.80 0.71 - 0.2 25 Unit V V mA Test Condition IR = 0.2mA IF = 5A, TJ = 25ºC IF = 5A, TJ = 125ºC VR = 100V, TJ = 25ºC VR = 100V, TJ = 125ºC 1. Short duration pulse test used to minimize self-heating effect. 2. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. SBR is a registered trademark of Diodes Incorporated. SBR10100 Document number: DS30961 Rev. 5 - 2 1 of 3 www.diodes.com March 2008 © Diodes Incorporated SBR10100CT SBR10100CTFP 100 IF, INSTANTANEOUS FORWARD CURRENT (A) IF(AVE), AVERAGE FORWARD CURRENT (A) 4 3 2 1 0 0 25 50 75 100 125 Tj=100°C 10 Tj=125°C Tj=75°C Tj=25°C 1 400 150 500 600 700 800 900 1,000 VF, INSTANTANEOUS FORWARD VOLTAGE (mV) TC CASE TEMPERATURE (°C) Figure 2: Typical Forward Characteristics, Per Element Figure 1: Current Derating Curve, Per Element 1,000.0 IR, INSTANTANEOUS REVERSE CURRENT (µA) NEW PRODUCT 5 Tj=125°C 100.0 Tj=100°C 10.0 Tj=75°C 1.0 Tj=25°C 0.1 10 20 30 40 50 60 70 80 90 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3: Typical Reverse Characteristics, Per Element Ordering Information (Note 3) Part Number SBR10100CT SBR10100CTFP Notes: Case TO-220AB ITO-220AB Packaging 50 pieces/tube 50 pieces/tube 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information SBR10100CT SBR10100CT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) YYWW AB YYWW AB SBR is a registered trademark of Diodes Incorporated. SBR10100 Document number: DS30961 Rev. 5 - 2 SBR10100CTFP SBR10100CTFP = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year, ex: 06 = 2006 WW = Week (01-52) 2 of 3 www.diodes.com March 2008 © Diodes Incorporated SBR10100CT SBR10100CTFP Package Outline Dimensions A E SEATING PLANE Q H1 D D1 1 2 3 L1 b2 L NEW PRODUCT A1 P c b e A2 e1 A E F ØP Q + D Not Through Holes 1 2 3 b2 L1 A1 L2 J1 b1 L b c e Notes: TO-220AB Dim Min Typ Max A 3.56 4.82 A1 0.51 1.39 A2 2.04 2.92 b 0.39 0.81 1.01 c 0.356 0.61 D 14.22 16.51 D1 8.39 9.01 e 2.54 e1 5.08 E 9.66 10.66 H1 5.85 6.85 L 12.70 14.73 L1 6.35 P 3.54 4.08 Q 2.54 3.42 All Dimensions in mm ØP E A A1 Q 10° D 5° 5° D1 L1 1 2 3 5° 5° 3 x b1 A2 3xb L 2xe c ITO-220AB (Note 4) Dim Min Typ Max A 4.50 4.70 4.90 A1 3.04 3.24 3.44 A2 2.56 2.76 2.96 b 0.50 0.60 0.75 b1 1.10 1.20 1.35 c 0.50 0.60 0.70 D 15.67 15.87 16.07 D1 8.99 9.19 9.39 e 2.54 E 9.91 10.11 10.31 L 9.45 9.75 10.05 L1 15.80 16.00 16.20 P 2.98 3.18 3.38 Q 3.10 3.30 3.50 All Dimensions in mm ITO-220AB ALTERNATE (Note 4) DIM. MIN. MAX. A 4.30 4.70 A1 1.3 b 0.50 0.75 b1 1.10 1.35 b2 1.50 1.75 c 0.50 0.75 D 14.80 15.20 E 9.96 10.36 e 2.54 typ F 2.80 3.20 J1 2.50 2.90 L 12.80 13.60 L1 1.70 1.90 L2 1.90 2.10 ØP 3.50 typ Q 2.70 typ All Dimensions in mm 4. For product manufactured with Date Code 0733 (week 33, 2007) and newer, please refer to ITO-220AB dimensions. For product manufactured prior to Date Code 0733, please refer to ITO-220AB ALTERNATE dimensions. IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR is a registered trademark of Diodes Incorporated. SBR10100 Document number: DS30961 Rev. 5 - 2 3 of 3 www.diodes.com March 2008 © Diodes Incorporated