VAISH CCF07KGNR36

CCF07
Vishay Dale
Metal Film Resistors, Industrial, ± 2 % and ± 5 % Tolerance
FEATURES
• 0.25 watt at + 70 °C power rating
Dual rated for 0.5 watt
Pb-free
Available
• ± 2 % and ± 5 % tolerance
e3
• ± 100 ppm/°C and ± 200 ppm/°C temperature
coefficient
RoHS*
• Tape and reel packaging for automatic insertion
(52.4 mm inside tape spacing per EIA-296-E)
COMPLIANT
• Flame retardant epoxy conformal coating
• Standard 4 band color code marking for ease of
identification after mounting
• Lead-(Pb)-free version is RoHS compliant
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL HISTORICAL
MODEL
MODEL
POWER RATING
P70 ˚C
W
LIMITING ELEMENT
VOLTAGE MAX.
V쓖
TEMPERATURE
COEFFICIENT
ppm/°C
TOLERANCE
RESISTANCE
RANGE
%
Ω
E-SERIES
CCF07
CCF-07
0.25 / 0.5
250
± 100
± 2, ± 5
10R - 1M
24
CCF07
CCF-07
0.25 / 0.5
250
± 200
±5
1.1M - 2M
24
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CCF07
Rated Dissipation at 70 °C
W
0.25 / 0.5
Maximum Working Voltage
V쓖
≤ 250
Insulation Voltage (1 min)
Veff
500
Dielectric Strength
VAC
450
Insulation Resistance
Ω
≥ 1011
Operating Temperature Range
°C
- 65 / + 150
Terminal Strength (pull test)
lb
2
Weight
g
0.35 max
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CCF07240RGKR36 (preferred part numbering format)
C
C
F
0
7
GLOBAL MODEL
RESISTANCE VALUE
CCF07
R = Decimal
K = Thousand
M = Million
10R0 = 10 Ω
680K = 680K Ω
2M00 = 2.0M Ω
2
4
0
TOLERANCE
CODE
G=±2%
J=±5%
R
G
K
TEMPERATURE
COEFFICIENT
K = 100 ppm
N = 200 ppm
R
3
6
PACKAGING
SPECIAL
E36 = Lead free, T/R (5000 pcs) Blank = Standard
R36 = Tin/Lead, T/R (5000 pcs) (Dash Number)
(up to 3 digits)
from 1 - 999
as applicable
Historical Part Number example: CCF-07241G (will continue to be accepted)
CCF-07
241
G
R36
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
12
For Technical Questions, contact [email protected]
Document Number: 31013
Revision 08-Dec-05
CCF07
DIMENSIONS in inches [millimeters]
1.100 ± 0.040
[27.94 ± 1.02]
0.245 ± 0.020
[6.22 ± 0.51]
Refer to note for
Wire Dia.
RATED POWER IN %
Metal Film Resistors, Industrial
Vishay Dale
120
100
80
60
40
0.090 ± 0.008
[2.29 ± 0.20]
20
0
*Note: Wire Dia.
CCF07 (Sn/Pb) = 0.025 ± 0.002 [0.64 ± 0.05]
CCF07 (Sn) = 0.023 ± 0.002 [0.60 ± 0.05]
- 65 - 50 - 25
0
25
50
70 75 100
125
150
175 200
AMBIENT TEMPERATURE IN ˚C
DERATING
MARKING
- Color band
RESISTANCE VALUES
Vishay Dale Model CCF07 is available in the standard 24 resistance values per decade. Values are obtained from the following decade table
by multiplying by powers of 10. As an example: 24 can represent 24 ohm, 240 ohm, 2.4 kohm, 24 kohm or 240 kohm.
10
18
33
56
11
20
36
62
12
22
39
68
13
24
43
75
15
27
47
82
16
30
51
91
PERFORMANCE
MAX. ∆R (Typical Test Lots)
TEST*
Thermal Shock
± 1.0 %
Short Time Overload
± 0.5 %
Low Temperature Operation
± 0.5 %
Moisture Resistance
± 1.5 %
Resistance to Soldering Heat
± 0.5 %
Shock / Bump
± 0.5 %
Vibration
± 0.5 %
Terminal Strength
± 0.5 %
Dielectric Withstanding Voltage
± 0.5 %
Life
± 1.5 %**
* Test Methods per MIL-STD-202G/IEC 60115/DIN EN 140000 (as applicable).
** Life ∆R is ± 2.0 % for 1/2 watt rating.
Document Number: 31013
Revision 08-Dec-05
For Technical Questions, contact [email protected]
www.vishay.com
13
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1