PRODUCT DATASHEET Winnie series last update 2/2/2018 DETAILS Product Number CN15826_WINNIE-O-C Family Winnie Type Assembly Color black Diameter mm Height 19,5 mm Style Optic Material PMMA Holder Material Fastening Status production ready ROHS Compliant Yes Date Updated 2/02/2018 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector V6 Gen6 64+18 deg Oval 82 % 1.800 LEDiL: F15253_HEKLA-SOCKET-A CLL02x/CLU02x (LES10) 63+23 deg Oval 80 % 1.500 LEDiL: F15255_HEKLA-SOCKET-C CLC030 Series (Dim-To-Warm) 56+30 deg Oval 79 % 1.300 LEDiL: C16142_HEKLA-SOCKET-K CLC020 Series (Dim-To-Warm) 58+20 deg Oval 81 % 1.700 LEDiL: C16142_HEKLA-SOCKET-K CXA/B 13xx 64+19 deg Oval 83 % 1.800 LEDiL: F15956_HEKLA-SOCKET-J LUXEON CoB 1202s 64+18 deg Oval 83 % 1.800 LEDiL: F15848_HEKLA-SOCKET-G LC020C 63+21 deg Oval 82 % 1.600 LEDiL: F15848_HEKLA-SOCKET-G LC010C 65+20 deg Oval 81 % 1.600 LEDiL: F15848_HEKLA-SOCKET-G COB D Series LES 9.8 mm 62+22 deg Oval 82 % 1.500 LEDiL: F15255_HEKLA-SOCKET-C COB D Series LES 14.5 mm 58+29 deg Oval 80 % 1.200 LEDiL: F15859_HEKLA-SOCKET-I SLE G6 LES15 sim: 60+27 Oval sim: 80 % sim: 1.400 LEDiL: F15859_HEKLA-SOCKET-I February 5th 2018 3:13 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 19.5 4 4 Front view Isometric view 3 3 2 50 2 Top view INDEX PART NO DESCRIPTION MATERIAL COLOUR 1 2 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. WINNIE-HLD-C WINNIE LENS PA66GF30 PMMA black Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE WINNIE-C series SIZE 1 PART NUMBER A4 SCALE D C15821 - 1:1 WEIGHT 23 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.