TI1 LM741J Lm741 operational amplifier Datasheet

LM741
www.ti.com
SNOSC25C – MAY 1998 – REVISED MARCH 2013
LM741 Operational Amplifier
Check for Samples: LM741
FEATURES
DESCRIPTION
•
•
The LM741 series are general purpose operational
amplifiers which feature improved performance over
industry standards like the LM709. They are direct,
plug-in replacements for the 709C, LM201, MC1439
and 748 in most applications.
1
2
Overload Protection on the Input and Output
No Latch-Up When the Common Mode Range
is Exceeded
The amplifiers offer many features which make their
application nearly foolproof: overload protection on
the input and output, no latch-up when the common
mode range is exceeded, as well as freedom from
oscillations.
The LM741C is identical to the LM741/LM741A
except that the LM741C has their performance
ensured over a 0°C to +70°C temperature range,
instead of −55°C to +125°C.
Connection Diagrams
LM741H is available per JM38510/10101
Figure 1. TO-99 Package
See Package Number LMC0008C
Figure 2. CDIP or PDIP Package
See Package Number NAB0008A, P0008E
Figure 3. CLGA Package
See Package Number NAD0010A
1
2
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated
LM741
SNOSC25C – MAY 1998 – REVISED MARCH 2013
www.ti.com
Typical Application
Figure 4. Offset Nulling Circuit
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings (1) (2) (3)
LM741A
LM741
±22V
±22V
±18V
500 mW
500 mW
500 mW
±30V
±30V
±30V
±15V
±15V
±15V
Continuous
Continuous
Continuous
Operating Temperature Range
−55°C to +125°C
−55°C to +125°C
0°C to +70°C
Storage Temperature Range
−65°C to +150°C
−65°C to +150°C
−65°C to +150°C
150°C
150°C
100°C
P0008E-Package (10 seconds)
260°C
260°C
260°C
NAB0008A- or LMC0008C-Package (10 seconds)
300°C
300°C
300°C
Vapor Phase (60 seconds)
215°C
215°C
215°C
Infrared (15 seconds)
215°C
215°C
215°C
400V
400V
400V
Supply Voltage
Power Dissipation
(4)
Differential Input Voltage
Input Voltage
(5)
Output Short Circuit Duration
Junction Temperature
LM741C
Soldering Information
M-Package
ESD Tolerance
(1)
(2)
(3)
(4)
(5)
(6)
(6)
“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits.
For military specifications see RETS741X for LM741 and RETS741AX for LM741A.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
For operation at elevated temperatures, these devices must be derated based on thermal resistance, and Tj max. (listed under “Absolute
Maximum Ratings”). Tj = TA + (θjA PD).
For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply voltage.
Human body model, 1.5 kΩ in series with 100 pF.
Electrical Characteristics (1)
Parameter
Input Offset Voltage
Test Conditions
LM741A
Min
LM741
Typ
Max
0.8
3.0
Min
LM741C
Typ
Max
1.0
5.0
Min
Typ
Max
2.0
6.0
Units
TA = 25°C
RS ≤ 10 kΩ
RS ≤ 50Ω
mV
TAMIN ≤ TA ≤ TAMAX
RS ≤ 50Ω
4.0
RS ≤ 10 kΩ
Average Input Offset Voltage
Drift
(1)
2
mV
6.0
15
7.5
μV/°C
Unless otherwise specified, these specifications apply for VS = ±15V, −55°C ≤ TA ≤ +125°C (LM741/LM741A). For the LM741C/LM741E,
these specifications are limited to 0°C ≤ TA ≤ +70°C.
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM741
LM741
www.ti.com
SNOSC25C – MAY 1998 – REVISED MARCH 2013
Electrical Characteristics(1) (continued)
Parameter
Test Conditions
Input Offset Voltage
Adjustment Range
TA = 25°C, VS = ±20V
Input Offset Current
TA = 25°C
LM741A
Min
Typ
3.0
Min
Typ
Max
±15
30
20
200
70
85
500
TA = 25°C
30
20
TA = 25°C, VS = ±20V
1.0
80
TAMIN ≤ TA ≤ TAMAX,
VS = ±20V
0.5
6.0
Units
mV
200
300
nA
nA/°C
80
0.210
500
80
1.5
0.3
2.0
0.3
500
nA
0.8
μA
2.0
MΩ
TA = 25°C
±12
TAMIN ≤ TA ≤ TAMAX
Large Signal Voltage Gain
LM741C
Max
0.5
TAMIN ≤ TA ≤ TAMAX
Input Voltage Range
Typ
±15
Average Input Offset
Current Drift
Input Resistance
Min
±10
TAMIN ≤ TA ≤ TAMAX
Input Bias Current
LM741
Max
±12
±13
V
±13
TA = 25°C, RL ≥ 2 kΩ
VS = ±20V, VO = ±15V
50
V/mV
VS = ±15V, VO = ±10V
50
200
20
200
TAMIN ≤ TA ≤ TAMAX,
RL ≥ 2 kΩ,
VS = ±20V, VO = ±15V
32
V/mV
VS = ±15V, VO = ±10V
VS = ±5V, VO = ±2V
Output Voltage Swing
25
15
10
VS = ±20V
RL ≥ 10 kΩ
±16
RL ≥ 2 kΩ
±15
V
VS = ±15V
RL ≥ 10 kΩ
±12
±14
±12
±14
RL ≥ 2 kΩ
±10
±13
±10
±13
Output Short Circuit
TA = 25°C
10
Current
TAMIN ≤ TA ≤ TAMAX
10
Common-Mode
TAMIN ≤ TA ≤ TAMAX
Rejection Ratio
RS ≤ 10 kΩ, VCM = ±12V
RS ≤ 50Ω, VCM = ±12V
Supply Voltage Rejection
TAMIN ≤ TA ≤ TAMAX,
Ratio
VS = ±20V to VS = ±5V
RS ≤ 50Ω
25
35
mA
70
80
95
86
96
90
70
90
dB
dB
77
96
77
96
TA = 25°C, Unity Gain
Rise Time
0.25
0.8
0.3
0.3
μs
Overshoot
6.0
20
5
5
%
0.5
0.5
Bandwidth
(2)
TA = 25°C
Slew Rate
TA = 25°C, Unity Gain
Supply Current
TA = 25°C
Power Consumption
TA = 25°C
VS = ±20V
0.437
1.5
0.3
0.7
80
MHz
V/μs
1.7
2.8
1.7
2.8
50
85
50
85
150
VS = ±15V
(2)
25
40
RS ≤ 10 kΩ
Transient Response
25
V
mA
mW
Calculated value from: BW (MHz) = 0.35/Rise Time (μs).
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM741
3
LM741
SNOSC25C – MAY 1998 – REVISED MARCH 2013
www.ti.com
Electrical Characteristics(1) (continued)
Parameter
LM741A
LM741A
Test Conditions
Min
Typ
LM741
Max
Min
Typ
LM741C
Max
Min
Typ
Max
Units
VS = ±20V
LM741
TA = TAMIN
165
TA = TAMAX
135
mW
VS = ±15V
TA = TAMIN
60
100
TA = TAMAX
45
75
Thermal Resistance
θjA (Junction to Ambient)
θjC (Junction to Case)
mW
CDIP (NAB0008A)
PDIP (P0008E)
TO-99 (LMC0008C)
SO-8 (M)
100°C/W
100°C/W
170°C/W
195°C/W
N/A
N/A
25°C/W
N/A
SCHEMATIC DIAGRAM
4
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM741
LM741
www.ti.com
SNOSC25C – MAY 1998 – REVISED MARCH 2013
REVISION HISTORY
Changes from Revision B (March 2013) to Revision C
•
Page
Changed layout of National Data Sheet to TI format ............................................................................................................ 4
Submit Documentation Feedback
Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: LM741
5
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM741CH
ACTIVE
TO-99
LMC
8
500
TBD
Call TI
Call TI
0 to 70
LM741CH
LM741CH/NOPB
ACTIVE
TO-99
LMC
8
500
Green (RoHS
& no Sb/Br)
POST-PLATE
Level-1-NA-UNLIM
0 to 70
LM741CH
LM741CN
ACTIVE
PDIP
P
8
40
TBD
Call TI
Call TI
0 to 70
LM
741CN
LM741CN/NOPB
ACTIVE
PDIP
P
8
40
Green (RoHS
& no Sb/Br)
SN
Level-1-NA-UNLIM
0 to 70
LM
741CN
LM741H
ACTIVE
TO-99
LMC
8
500
TBD
Call TI
Call TI
-55 to 125
LM741H
LM741H/NOPB
ACTIVE
TO-99
LMC
8
500
Green (RoHS
& no Sb/Br)
POST-PLATE
Level-1-NA-UNLIM
-55 to 125
LM741H
LM741J
ACTIVE
CDIP
NAB
8
40
TBD
Call TI
Call TI
-55 to 125
LM741J
U5B7741312
ACTIVE
TO-99
LMC
8
500
TBD
Call TI
Call TI
-55 to 125
LM741H
U5B7741393
ACTIVE
TO-99
LMC
8
500
TBD
Call TI
Call TI
0 to 70
LM741CH
U9T7741393
ACTIVE
PDIP
P
8
40
TBD
Call TI
Call TI
0 to 70
LM
741CN
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
(3)
11-Apr-2013
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
NAB0008A
J08A (Rev M)
www.ti.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages