CEL NR7800FP-BC-AZ Ingaas pin-pd in coaxial package for 155mb/s and 622 mb/s application Datasheet

µm
NEC's φ
φ80µ
InGaAs PIN-PD IN COAXIAL PACKAGE NR7800 SERIES
FOR 155Mb/s AND 622 Mb/s APPLICATIONS
FEATURES
DESCRIPTION
• SMALL DARK CURRENT:
ID = 0.1 nA
NEC's NR7800 Series are InGaAs PIN photo diode (PIN-PD)
coaxial modules with optical fiber pigtail. These modules are
designed for long wavelength optical communication systems
and are ideal as recievers for Synchronous Digital Hierarchy
(SDH) system, STM-4 and STM-1, ITU-T recommendations.
• HIGH SPEED RESPONSE:
fc = 2.5 GHz MIN.
• HIGH SENSITIVITY:
S = 0.89 A/W AT λ = 1310 nm
S = 0.94 A/W AT λ = 1550 nm
• LOW OPERATING VOLTAGE:
VR = 5 V
• COAXIAL MODULE WITH SINGLE MODE FIBER (SMF)
or GI-50 fiber
• WITH SC CONNECTOR: Standard, FC connector: option
(Refer to Ordering Information)
ELECTRO-OPTICAL CHARACTERISTICS (TC = 40° C to +85º C, unless otherwise specified)
PART NUMBER
SYMBOLS
PARAMETERS AND CONDITIONS
ID
Dark Current, VR = 5 V, TC = 25º C
VR = 5 V
Ct
Terminal Capacitance, VR = 5 V, f = 1 MHz, TC = 25º C
S
Sensitivity, VR = 5 V, λ = 1310 nm
VR = 5 V, λ = 1550 nm
NR7800 SERIES
UNITS
MIN
nA
pF
A/W
0.78
0.80
TYP
MAX
0.1
1.0
20
1.0
1.5
0.89
0.94
∆St
Temperature Dependence of Sensitivity,
VR = 5 V, λ = 1550 nm
%
-5
5
∆Sp
Polarization Dependence of Sensitivity,
VR = 5 V, λ = 1550 nm, TC = 25º C
%
-2.5
2.5
∆S w
Wavelength Dependence of Sensitivity,
VR = 5 V, λ = 1520 to 1560 nm, TC = 25º C
%
-2.5
2.5
GHz
2.5
dB
30
28
fc
ORL
Cut-off Frequency, VR = 5 V, TC = 25º C
Optical Return Loss,
SMF
GI-50 Fiber
California Eastern Laboratories
NR7800 Series
ABSOLUTE MAXIMUM RATINGS1
(TC = 25°C, unless otherwise specified)
SYMBOLS
PARAMETERS
UNITS
RATINGS
VR
Reverse Voltage
V
20
IF
Forward Current
mA
10
PIN
Optical Input Power
mW
8
TC
-40 to +85
Operating Case Temp.
°C
TSTG
Storage Temperature
°C
-40 to +85
TSLD
Lead Soldering Temp.
°C
260 (10 sec.)
Relative Humidity
(noncondensing)
%
85
RH
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified)
TEMPERATURE DEPENDENCE OF
SENSITIVITY
WAVELENGTH DEPENDENCE OF
QUANTUM EFFICIENCY
10
Sensitivity (Relative Value), ∆S/S (%)
Quantum Efficiency, η (%)
100
80
60
40
20
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
-40
-20
0
20
40
60
80
100
Wavelength, λ (µm)
Operating Case Temperature, TC (°C)
REVERSE VOLTAGE DEPENDENCE
OF DARK CURRENT
TEMPERATURE DEPENDENCE
OF DARK CURRENT
10
10
VR = 5 V
Dark Current, ID (nA)
Dark Current, ID (nA)
0
-10
-60
0
0.9
λ = 1310 nm
TC = 75°C
1.0
50°C
25°C
0.1
0°C
1.0
0.1
0.01
0.01
-25°C
0.001
0
10
20
Reverse Voltage, VR (V)
Remark:The graphs indicate nominal characteristics.
0.001
-60
-40
-20
0
20
40
60
80
Operating Case Temperature, TC (°C)
100
NR7800 Series
TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified)
REVERSE VOLTAGE DEPENDENCE
OF TERMINAL CAPACITANCE
FREQUENCY RESPONSE
5
12
9
Terminal Capacitance, Ct (pF)
VR = 5 V
λ = 1310 nm
RL = 50 Ω
Response (dB)
6
3
0
-3
-6
-9
-12
f = 1.0 MHz
1
0.5
-15
2.5
0
0.01
5.0
0.1
Frequency, f (GHz)
1
10
100
Reverse Voltage, VR (V)
Remark:The graphs indicate nominal characteristics.
OUTLINE DIMENSIONS (Units in mm)
NR7800BFP/FR
Optical Fiber
Length: 1 m MIN
0.5±0.1
ø0.45±0.05
12.7±0.2
17.0±0.2
2
7.2±0.3
1
3.7±0.3
3
2
ø0.45±0.05
16.0±0.2
3
P.C.D. = ø2.0
0.5
24.7±1.0
14.0±1.0
ø2.2
ø5.0±0.2
4.0±0.5
3.5±0.5
2.2
10.5±1.0
1.2±0.2
3.2
ø7.0±0.2
1.0±0.1
ø3.2±0.2
ø3.2±0.2
ø5.0±0.2
4.0±0.2
ø0.9
3.5±0.5
11.2±1.0
4.0±0.5
14.0±1.0
25.4±1.0
ø0.9
3
P.C.D. = ø2.0
1
2
4–R1.25±0.2
3
1. Anode (Negative)
2. Cathode (Positive)
3. Case
2
2 – ø2.5
1
8.5±0.2
12.0±0.1
7.0±0.2
Optical Fiber
Length: 1 m MIN
NR7800CP/CR
1
1. Anode (Negative)
2. Cathode (Positive)
3. Case
NR7800 Series
OPTICAL FIBER CHARACTERISTICS
PARAMETER
UNITS
SPECIFICATION
SMF
GI-50
Mode Field Diameter
µm
9.5±1
–
Core Diameter
µm
–
50±3
Cladding Diameter
µm
125±2
125±2
Maximum Cladding Noncircularity
%
2
2
Maximum Core/Cladding Concentricity
%
1.6
4.0
mm
0.9±0.1
0.9±0.1
Cut-off Wavelength
nm
1100 to 1270
–
Minimum Fiber Bending Radius
mm
30
30
Fiber Length
mm
1000 MIN
1000 MIN
Outer Diameter
Flammability
UL1581 VW-1
35±2
5±2 mm
8.99±0.5 mm
Connector
Fiber Length: 1000 mm MIN
ORDERING INFORMATION
PART NUMBER FLANGE TYPE
NR7800FP-BC-AZ* Flat mount Flange
NR7800FP-CC-AZ*
NR7800FR-BB-AZ*
NR7800FR-CB-AZ*
NR7800CP-BC-AZ* Vertical Mount
NR7800CP-CC-AZ* Flange
NR7800CR-BB_AZ*
NR7800CR-CB-AZ*
Note:
1. SC Connector: standard
FC Connector: option
FIBER TYPE
SMF
GI-50 Fiber
SMF
GI-50 Fiber
AVAILABLE CONNECTOR1
With FC-UPC Connector
With SC-UPC Connector
With FC-SPC Connector
With SC-SPC Connector
With FC-UPC Connector
With SC-UPC Connector
With FC-SPC Connector
With SC-SPC Connector
*NOTE:
Please refer to the last page of this data sheet, “Compliance with EU Directives” for Pb-Free RoHS Compliance Infomation.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify
CEL for all damages resulting from such improper use or sale.
04/02/2003
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
3-180
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
3-181
Similar pages