FAB0403012 RY INA M I L E R P FEATURES 74 x 87 x 233 mm INPUT : 90-265Vac or 130-210Vdc OUTPUT : 24V / 300W Efficiency : 85 % typ. External air forced APPLICATIONS Naval. INPUT Voltage range : 90-265Vac or 130-210Vdc 47-63Hz PFC EN61000-3-2, MIL-STD 461E CE101 Input protection : fuse 5A transient and surges protected inrush current limitation reverse polarity protection in DC operation OUTPUT Voltage : Output power : 24Vdc 200W for AC input : 90-132Vac 300W for AC input : 132-264Vac and DC input 132-210Vdc OUTPUT Typ. Max. Line regulation 0,1 % 0,2 % Load regulation 0,5 % 1% No load to full load Ripple and noise 1% 2% Peak to peak, nom. Input ; full load Current limit Short circuit current Rev. 01 115 % of I nominal 115 % of I out nominal Conditions Low line to high line ; full load Vout = 95% of nominal ; Automatic restart 115 % of I out nominal 1/3 FAB0403012 SIGNALS Power Good : Output OK by relay contact Input OK : by led ENVIRONMENTAL Storage temperature : -40°C to +100°C Operating temperature : -20°C to +55°C ambiant, forced air, Nominal Power Humidity : PCB coating ISOLATION Input to chassis : 1500 Vrms Input to Output : 3000 Vrms GENERAL Safety : built to meet EN60950 EMI : built to meet EN55022B, GAM EG13, MIL-STD 461E, conducted Rev. 01 2/3 FAB0403012 MECHANICALS INPUT J1 : FCI - DA7W2PA00 PIN A1 A2 1-5 INPUT AC/L or +IN AC/N or -IN Ground REPORT INPUT J2 : FCI - DA7W2SA00 PIN A1 A2 1-2 3 4 5 INPUT AC/L or +IN AC/N or -IN Ground Power Good normally open (no) Power Good normally closed (nc) Power Good common INPUT J3 : FCI - DA3W3SA00 PIN A1 A2 A3 Rev. 01 3/3 INPUT + Vout - Vout NC