Electrical / Environmental Micropower Low Profile Surface Mount Inductors S H o R ant • Operating Temperature Range pli Com -40°C to +125°C Specifications @ 25°C Inductance @100kHz, 0.1 V RMS Zero DC (µH ±20%) with DC (µH Min.) Part Number HM64-101R0LF HM64-102R2LF HM64-104R7LF HM64-10100LF HM64-10150LF HM64-10220LF HM64-10330LF HM64-10470LF Notes: 1.0 2.2 4.7 10.0 15.0 22.0 33.0 47.0 Rated (1) DC Current Amps Isat (2) Amps DC Resistance Ω Max. 1.67 1.40 0.98 0.67 0.54 0.45 0.37 0.31 2.1 1.4 1.0 0.68 0.54 0.45 0.37 0.31 0.103 0.130 0.180 0.240 0.330 0.360 0.550 0.850 0.80 1.60 3.22 6.96 10.71 15.26 23.59 32.48 (1) Rated DC current is the approximate current at which inductance will be decreased by 30% from it’s initial (zero DC) value or the DC current at which ∆T = 40°C, whichever is lower. (2) Peak Current (Isat) for approximately 30% inductance roll-off. Outline Dimensions (mm) Figure 1 Recommended Solder Pad Layout 5.7 + 0.3 7.5 + 0.25 5.6 0.8 4.5 5.1 + 0.2 1.6 + 0.2 Packaging Standard: Embossed Tape & Reel Reel: 44 Diameter: Capacity: = = 7” (177.8mm) 500 Units MAGNETIC COMPONENTS SELECTOR GUIDE 2007/08 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical Characteristics @ 25°C Ordering Information HM64 10 1R0 LF TR7 TR - Tape & Reel Packing 7 - 7” reel Model Series Case Size Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10µH, “R“ denotes the decimal point. Lead-Free 2007/08 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 45