HDSP-B42G, HDSP-B47G 18:88 0.56" Four Digit Seven Segment Displays Data Sheet Description Features The 18:88 0.56" Four Digit Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast. • Excellent appearance All devices are available in either common anode or common cathode configuration with tinted green segments. • Choice of character size: 0.56 inch • Slim font design • Mitered corners, evenly illuminated segments • Gray face for optimum on/off contrast • Choice of colors: green • Characterized for luminous intensity Devices Green Description HDSP-B42G 4 Digit, Common Anode, Tinted Green, 0.56" Display HDSP-B47G 4 Digit, Common Cathode, Tinted Green, 0.56" Display Package Dimensions (HDSP-B42G/B47G) FRONT VIEW RIGHT SIDE 8.00 (0.315) 7.80 (0.307) 7.00 (0.276) 10.00° 14.20 (0.559) 19.10 (0.752) 5.00 ± 0.50 (0.197) B 15.24 (0.600) 19.10 (0.752) C F A DP3 A G BF E D DP2 PIN 1 PIN 7 12.7x3 ± 38.1 (0.5x3 ± 1.500) CANNOT READ INPUT! G CE A BF D 8 – ∅1.50 (0.059) TOP SIDE BOTTOM SIDE 51.20 (2.016) 51.20 (2.016) 8.00 (0.315) 8.00 (0.315) HDSP-XXXX YWW XZ COO DATE CODE LUMINOUS INTENSITY CATEGORY COUNTRY OF ORIGIN 2.54 (0.100) COLOR BIN 0.50 (0.020) 4.00 (0.157) HDSP-B42G Pkg Dimen NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. PIN 1 2 3 4 5 6 7 8 9 10 11 12 G CE FUNCTION E D DP C G DIGIT 4 COMMON A/C B DIGIT 3 COMMON A/C DIGIT 2 COMMON A/C F A DIGIT 1 COMMON A/C B C D Internal Circuit Diagram (Common Cathode) DIGIT 1 12 B DIGIT 2 9 DIGIT 3 8 DIGIT 4 6 DIGIT 3 8 DIGIT 4 6 C A 11 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 Internal Circuit Diagram (Common Anode) DIGIT 1 12 B DIGIT 2 9 HDSP-B42G Circuit Diag – Cathode C A 11 B 7 C 4 D 2 E 1 F 10 G 5 DP 3 Absolute Maximum Ratings Description Green Units 65 mW Peak Forward Current per Segment or DP 100 mA DC Forward Current per Segment or DP 25 mA Operating Temperature Range –40 to +105 ˚C Storage Temperature Range –40 to +105 ˚C Reverse Voltage per Segment or DP 3 V Wavesoldering Temperature for 3 seconds 1.59 mm below body 250 ˚C Average Power per Segment or DP HDSP-B42G Circuit Diag – Anode Note: 1. Derate above 40˚C at 0.33 mA/˚C for Green. Electrical/Optical Characteristics at TA = 25˚C Device Series Parameter Symbol Min. Typ. HDSP-B42G/ HDSP-B47G Luminous Intensity/ Segment (Digit Average) IV 2.000 3.200 Forward Voltage/ Segment or DP VF 2.20 Peak Wavelength λPEAK Dominant Wavelength λd Reverse Current IR Max. Units Test Conditions mcd IF = 10 mA V IF = 20 mA 565 nm IF = 20 mA 570 nm IF = 20 mA µA VR = 5 V 2.50 100 Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. RθJ-A = 770°C/W 30 25 20 15 GREEN 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable DC current vs. HDSP-B42G fig 1 ambient temperature. 100 90 80 70 60 50 40 30 GREEN 20 10 0 0 1 2 3 4 5 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA FOR GREEN) 35 IF – FORWARD CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA 40 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 6 4 2 GREEN 0 0 5 10 15 20 25 IF – DC FORWARD CURRENT – mA Figure 3. Relative luminous intensity vs. DC forward current. HDSP-B42G fig 2 Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. For product information and a complete list of distributors, please go to our website: 8 www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved. Obsoletes 5988-4820EN AV02-1679EN - November 21, 2008 HDSP-B42G fig 3 30