Aluminum Electrolytic Capacitors/ S Surface Mount Type Series: S Type: V ■ Features ● Endurance: 85 °C 2000 h ● Vibration-proof product is available upon request. (φ8 mm and larger) ● RoHS directive compliant ■ Specifications Category Temp. Range –40 °C to +85 °C Rated W.V. Range 4 V.DC to 100 V.DC Nominal Cap. Range 0.1 µF to 1500 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) (Bi-Polar I < 0.02 CV or 6 (µA) After 2 minutes (Whichever is greater) DC Leakage Current tan δ Please see the attached standard products list Characteristics at Low Temperature W.V. (V) 4 6.3 10 16 25 35 50 63 Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 3 100 3 Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 4 4 (Impedance ratio at 120 Hz) After applying rated working voltage for 2000 hours (Bi-polar:1000 hours for each polarity) at +85 °C ±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. ±20 % of inisial measured value Size code Capacitance change Endurance A(φ3) Rated W.V. Cap. change 4 W.V to 50 W.V B(φ4) to D, D8(φ6.3) 1000 hours ±30 % 4 W.V 6.3 W.V < D(φ6.3) Miniature > 10 W.V tan δ < 200 % initial specified value DC leakege current < initial specified value 1000 hours ±20 % After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Resistance to Soldering Heat ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 1.00 1k 1.30 10 k to 1.70 ■ Dimensions in mm (not to scale) Capacitance (µF) 33 4S Series indentification (S) or (A) (A size=Lot number) Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (V.DC) (6=6.3 V.DC) Lot number (No marking=A size) L 5.4+- 0.1 0.2 0.1 5.4+- 0.2 5.4+- 0.1 0.2 5.4+- 0.1 0.2 7.7±0.3 6.2±0.3 10.2±0.3 10.2±0.3 A, B (P) H L Pressure Relief (φ10 and larger) Size D code A 3.0 B 4.0 C 5.0 D 6.3 D8 6.3 E 8.0 F 8.0 G 10.0 K (I) A±0.2 – φD±0.5 Negative polarity marking (–) (No marking for the bi-polar) 0.3 max. + H 3.3 4.5 max. 4.3 5.5 max. 5.3 6.5 max. 6.6 7.8 max. 6.6 7.8 max. 8.3 9.5 max. 8.3 10.0 max. 10.3 12.0 max. (I) Example:4V 33 µF (Polarized) Marking color: BLACK (Unit : mm) B±0.2 ■ Marking 50, 60 0.70 W ( ) Reference size I W P 1.5 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.55±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 0.6 1.0 1.5 1.8 1.8 2.2 3.1 4.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-9 – K 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 + 0.15 0.35 - 0.20 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 0.70±0.20 0.70±0.20 00 Nov. 2012 Aluminum Electrolytic Capacitors/ S ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) 4 Cap. (±20 %) (µF) 22 33 47 100 220 330 470 22 33 47 100 6.3 220 330 470 1000 1500 22 33 47 100 10 220 330 470 1000 10 22 33 47 16 100 220 330 470 Dia. Length (mm) 3 4 4 5 6.3 6.3 6.3 3 4 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 5 5 6.3 6.3 8 8 8 10 10 3 4 4 5 5 5 6.3 6.3 8 6.3 8 8 10 8 10 (mm) 5.4 5.4 5.4 5.4 5.4 5.4 7.7 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification ✽Size Code A B B C D (D) D8 (A) B (B) (B) C (C) D (D) D8 E F (F) G G (B) (B) C (C) (C) D D8 E F (F) G G A B (B) C (C) (C) D (D) E D8 F (F) G (F) G Ripple tan δ Current Endurance (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mA r.m.s.) (hours) 19 0.37 1000 26 0.35 1000 34 0.35 1000 61 0.35 1000 82 0.35 1000 80 0.50 1000 200 0.35 1000 20 0.35 1000 29 0.26 2000 22 0.35 1000 36 0.35 1000 46 0.26 2000 47 0.35 1000 71 0.26 2000 74 0.35 1000 188 0.26 2000 300 0.35 2000 380 0.35 2000 500 0.35 2000 700 0.35 2000 750 0.35 2000 28 0.30 1000 29 0.30 1000 43 0.20 2000 43 0.30 1000 50 0.30 1000 70 0.26 2000 173 0.20 2000 250 0.26 2000 390 0.26 2000 390 0.26 2000 400 0.26 2000 580 0.26 2000 20 0.18 1000 28 0.16 2000 28 0.26 1000 39 0.16 2000 35 0.26 1000 39 0.26 1000 70 0.16 2000 70 0.26 1000 200 0.20 2000 162 0.16 2000 280 0.20 2000 320 0.20 2000 380 0.20 2000 350 0.20 2000 420 0.20 2000 Part No. (RoHS:compliant) Reflow EEE0GS220SR ✽✽ EEE0GA330SR EEE0GA470SR EEE0GA101SR EEE0GA221SP EEE0GA331WP EEE0GA471XP EEE0JS220WR ✽✽ EEE0JA220SR EEE0JA330WR EEE0JA470WR EEE0JA470SR EEE0JA101WR EEE0JA101SP EEE0JA221WP EEE0JA331XP EEE0JA331P EEE0JA471P EEE0JA102UP EEE0JA102P EEE0JA152P EEE1AA220WR EEE1AA330WR EEE1AA330SR EEE1AA470WR EEE1AA101WR EEE1AA101SP EEE1AA221XP EEE1AA221P EEE1AA331P EEE1AA471UP EEE1AA471P EEE1AA102P EEE1CS100SR ✽✽ EEE1CA100SR EEE1CA220WR EEE1CA220SR EEE1CA330WR EEE1CA470WR EEE1CA470SP EEE1CA101WP EEE1CA101P EEE1CA221XP EEE1CA221P EEE1CA331UP EEE1CA331P EEE1CA471UP EEE1CA471P (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (2) Taping (pcs) 2000 2000 2000 1000 1000 1000 900 2000 2000 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 2000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 ✽ Size code( ):Miniaturization product ✽✽ Dia.3mm is not recommended for new design. Please consider Dia.4mm.(Available upon request) · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-10 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ S ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) Cap. (±20 %) (µF) 4.7 10 22 33 25 47 100 220 330 470 2.2 3.3 4.7 10 22 35 33 47 100 220 330 Dia. Length (mm) 3 4 4 5 5 6.3 5 6.3 6.3 6.3 8 8 8 10.0 8 10 10 3 3 4 4 5 5 6.3 6.3 8 6.3 8 6.3 8 10 8 10 10 (mm) 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 6.2 10.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 5.4 6.2 7.7 10.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification ✽Size Code A B (B) C (C) D (C) D (D) D8 (E) F (F) G (F) G G A A B (B) C (C) D (D) E (D) E D8 (F) G (F) G G Ripple tan δ Current Endurance (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mA r.m.s.) (hours) 12 0.16 1000 22 0.14 2000 22 0.20 1000 28 0.14 2000 35 0.20 1000 55 0.14 2000 42 0.20 1000 65 0.14 2000 70 0.20 1000 143 0.14 2000 91 0.16 2000 180 0.16 2000 230 0.16 2000 310 0.16 2000 270 0.16 2000 340 0.16 2000 380 0.16 2000 8 0.14 1000 10 0.14 1000 22 0.12 2000 22 0.16 1000 30 0.12 2000 36 0.16 1000 60 0.12 2000 60 0.16 1000 130 0.14 2000 70 0.16 1000 165 0.14 2000 132 0.12 2000 140 0.14 2000 210 0.14 2000 200 0.14 2000 310 0.14 2000 350 0.14 2000 Part No. (RoHS:compliant) Reflow EEE1ES4R7SR ✽✽ EEE1EA4R7SR EEE1EA100WR EEE1EA100SR EEE1EA220WR EEE1EA220SP EEE1EA330WR EEE1EA330SP EEE1EA470WP EEE1EA101XP EEE1EA101UP EEE1EA101P EEE1EA221UP EEE1EA221P EEE1EA331UP EEE1EA331P EEE1EA471P EEE1VS2R2SR ✽✽ EEE1VS3R3SR ✽✽ EEE1VA4R7SR EEE1VA100WR EEE1VA100SR EEE1VA220WR EEE1VA220SP EEE1VA330WP EEE1VA330P EEE1VA470WP EEE1VA470P EEE1VA101XP EEE1VA101UP EEE1VA101P EEE1VA221UP EEE1VA221P EEE1VA331P (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (1) (2) (2) (2) (2) (2) Taping (pcs) 2000 2000 2000 1000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 500 500 500 500 500 ✽ Size code( ):Miniaturization product ✽✽ Dia.3mm is not recommended for new design. Please consider Dia.4mm.(Available upon request) · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-11 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ S ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) Cap. (±20 %) (µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 50 4.7 10 22 33 47 100 220 22 63 33 47 100 3.3 4.7 100 10 22 33 Dia. Length (mm) 3 4 3 4 3 4 3 4 3 4 3 4 4 4 5 5 6.3 6.3 8 6.3 8 8 6.3 8 10 8 10 10 8 8 8 8 10 10 8 8 8 8 8 8 10 10 (mm) 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 6.2 10.2 10.2 10.2 10.2 10.2 6.2 6.2 10.2 6.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification ✽Size Code A B A B A B A B A B A B B (B) C (C) D (D) E D8 (E) F D8 (F) G (F) G G (E) F F (F) G G E (E) F (E) F (F) G G Ripple tan δ Current Endurance (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mA r.m.s.) (hours) 1 0.14 1000 1 0.12 2000 2 0.14 1000 2 0.12 2000 3 0.14 1000 3 0.12 2000 5 0.14 1000 5 0.12 2000 8 0.14 1000 10 0.12 2000 8 0.14 1000 16 0.12 2000 16 0.12 2000 18 0.14 1000 23 0.12 2000 27 0.14 1000 35 0.12 2000 40 0.14 1000 120 0.12 2000 85 0.12 2000 65 0.12 2000 110 0.12 2000 105 0.12 2000 110 0.12 2000 130 0.12 2000 200 0.12 2000 250 0.12 2000 300 0.12 2000 40 0.18 2000 40 0.18 2000 45 0.18 2000 45 0.18 2000 45 0.18 2000 60 0.18 2000 50 0.18 2000 50 0.18 2000 80 0.18 2000 50 0.18 2000 85 0.18 2000 55 0.18 2000 85 0.18 2000 90 0.18 2000 Part No. (RoHS:compliant) Reflow EEE1HS0R1SR ✽✽ EEE1HA0R1SR EEE1HSR22SR ✽✽ EEE1HAR22SR EEE1HSR33SR ✽✽ EEE1HAR33SR EEE1HSR47SR ✽✽ EEE1HAR47SR EEE1HS010SR ✽✽ EEE1HA010SR EEE1HS2R2SR ✽✽ EEE1HA2R2SR EEE1HA3R3SR EEE1HA4R7WR EEE1HA4R7SR EEE1HA100WR EEE1HA100SP EEE1HA220WP EEE1HA220P EEE1HA330XP EEE1HA330UP EEE1HA330P EEE1HA470XP EEE1HA470UP EEE1HA470P EEE1HA101UP EEE1HA101P EEE1HA221P EEE1JA220UP EEE1JA220P EEE1JA330P EEE1JA470UP EEE1JA470P EEE1JA101P EEE2AA3R3P EEE2AA4R7UP EEE2AA4R7P EEE2AA100UP EEE2AA100P EEE2AA220UP EEE2AA220P EEE2AA330P (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (1) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) Taping (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 900 1000 500 900 500 500 500 500 500 1000 500 500 500 500 500 1000 1000 500 1000 500 500 500 500 ✽ Size code( ):Miniaturization product ✽✽ Dia.3mm is not recommended for new design. Please consider Dia.4mm.(Available upon request) · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-12 – 00 Nov. 2012 Aluminum Electrolytic Capacitors/ S ■ Standard Products (Bi-polar) Endurance : 85 °C 2000 h Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (µF) 22 47 10 33 4.7 10 22 3.3 4.7 10 2.2 4.7 10 0.22 0.33 0.47 1 2.2 3.3 4.7 Dia. Length (mm) 5 6.3 4 6.3 4 5 6.3 4 5 6.3 4 5 6.3 4 4 4 4 5 5 6.3 (mm) 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 Min. Packaging Q'ty Specification Size Code C D B D B C D B C D B C D B B B B C C D Ripple tan δ Current Endurance (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mA r.m.s.) (hours) 29 0.52 2000 46 0.52 2000 25 0.40 2000 43 0.40 2000 20 0.32 2000 25 0.32 2000 39 0.32 2000 12 0.28 2000 21 0.28 2000 28 0.28 2000 12 0.24 2000 22 0.24 2000 30 0.24 2000 2 0.24 2000 3 0.24 2000 5 0.24 2000 10 0.24 2000 16 0.24 2000 21 0.24 2000 31 0.24 2000 Part No. (RoHS:compliant) EEE0JA220NR EEE0JA470NP EEE1AA100NR EEE1AA330NP EEE1CA4R7NR EEE1CA100NR EEE1CA220NP EEE1EA3R3NR EEE1EA4R7NR EEE1EA100NP EEE1VA2R2NR EEE1VA4R7NR EEE1VA100NP EEE1HAR22NR EEE1HAR33NR EEE1HAR47NR EEE1HA010NR EEE1HA2R2NR EEENZ1H3R3R EEE1HA4R7NP Reflow (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) Taping (pcs) 1000 1000 2000 1000 2000 1000 1000 2000 1000 1000 2000 1000 1000 2000 2000 2000 2000 1000 1000 1000 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EEE-13 – 00 Nov. 2012