BOARDCOM ACPM-9430-TR1 Power amplifier module Datasheet

ACPM-9430
LTE Band 7 MIPI ET PA
2.0 mm × 2.5 mm
Power Amplifier Module
Product Brief
Description
Features
The ACPM-9430 is a fully matched 10-pin surface mount power
amplifier module developed for LTE Band30. The 2 mm ×
2.5 mm form-factor package is self contained, and it
incorporates 50-ohm input and output matching networks.

The ACPM-9430 features CoolPAM circuit technology that
supports two power modes—low and high. The CoolPAM is a
stage bypass technology that enhances PAE (power added
efficiency) at low power range.

The power amplifier is manufactured on an advanced InGaP
HBT (hetero-junction bipolar transistor) MMIC (microwave
monolithic integrated circuit) technology that offers
state-of-the-art reliability, temperature stability, and
ruggedness.

Thin package (0.82 mm typical)
Small size (2 mm × 2.5 mm)
Excellent linearity in envelope tracking mode
High efficiency at peak power envelope power
Compatible with MIPI RFFE
Two-mode power
Quiescent current control for high power mode and low
power mode
Ten-pin surface mounting package
Internal 50-ohm matching networks for both RF input and
output
Separate drive and output VCC supplies
Low bypass capacitance
Green –Lead-free and RoHS compliant









Application
LTE Band 30

Ordering Information
Part Number
ACPM-9430-TR1
Avago Technologies
-1-
Number of
Devices
1,000
Container
178 mm (7 in.) tape/reel
ACPM-9430
Product Brief
Package Dimensions
Package Dimensions
The dimensions are in millimeters.
1JO.BSL
œ
œ
œ
Marking Specification
1JO.BSL
111 1
'==
̻
%o%BUF$PEF
;;o"TTFNCMZ-PU*EFOUJGJDBUJPO
o%FWJDF$PEF
Avago Technologies
-2-
Pin Description
Pin #
Name
Description
1
VCC1
DC supply voltage, connect to the RF stages' collector to which APT/ET is applied (0.5V~3.5V)
2
RFIN
RF input
3
Vbat
DC supply voltage, connect to the bias circuitry with a fixed voltage (higher than 3.0V)
4
Vio
RFFE enable
5
Sdta
RFFE data
6
Sclk
RFFE clock
7
GND
Ground
8
NC
No connection
9
RFOUT
RF output
10
VCC2
DC supply voltage, connect to the RF stages' collector to which APT/ET is applied (0.5V~3.5V)
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the
United States and other countries. All other brand and product names may be trademarks of
their respective companies.
Data subject to change. Copyright © 2015 Avago Technologies. All Rights Reserved.
AV02-4863EN – 2015-03-24
Similar pages