N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 FEATURES Part No VD S S (at Tj(max)) RD S ( o n ) ID FSM75N75 75V <0.011Ω 80A GENERAL DESCRIPTION This Power MOSFET series has specifically been designed to minimize input capacitance and gate charge. It is therefore suitable as primary switch in advanced high-efficiency, high-frequency isolated DC-DC converters for Telecom and Computer applications. It is also intended for any applications with low gate drive requirements. z Exceptional dv/dt capability z 100% avalanche tested z Low intrinsic capacitances ADVANTAGES APPLICATIONS z z z Easy to mount Space savings High power density z z z z DC motor control Solenoid and relay drivers DC-DC Converters Automotive environment INTERNAL SCHEMATIC DIAGRAM AND EXTERIOR ABSOLUTE MAXIMUM RATINGS Symbol Parameter Rating Unit VDSS TJ = 25°C to 150°C 75 V VGS Continuous ± 20 V Drain current (continuous) at TC = 25°C 80 Drain current (continuous) at TC = 100°C 65 Drain current (pulsed with limited by TJM) at TC = 25°C 320 A TJ = 25°C 200 W Derating Factor 1.5 W/°C ID IDM PD A 15 V/ns EAS Peak diode recovery voltage slope (ISD≤80A, di/dt≤300A/µs, VDD≤V(BR)DSS, TJ≤TJMAX) TJ = 25°C, ID = 40A, VDD= 38V 700 mJ TJ Max operating junction temperature 160 °C Storage temperature -55 to 160 °C dv/dt Tstg 1/9 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 THERMAL DATA Symbol Parameter Rating Unit RthJC Thermal resistance junction-case 1 °C/W RthJA Thermal resistance junction-ambient 62.5 °C/W Maximum lead temperature for soldering purpose(1) 300 °C Tl Note: (1) 1.6mm from case for 10sec. ELECTRICAL CHARACTERISTICS(TCASE=25°C, UNLESS OTHERWISE NOTED) Symbol Off Characteristics VDSS Test Conditions Min. ID = 250µA, VGS= 0 75 Typ. 1 10 µA µA ±100 nA 2.8 4 V 0.0097 0.011 Ω VDS = 75V，VGS= 0 ，TJ=100°C VGS = ±20V ，VDS= 0 IGSS Unit V VDS = 75V，VGS= 0 TJ=25°C IDSS Max. On Characteristics VDS = VGS , ID = 250µA VGS(th) VGS= 10V, ID= 40A RDS ( on ) Pulse test, t ≤ 300 ms, duty cycle d ≤ 2% 2 Dynamic Characteristics gfs VDS = 15V, ID = 40A ，Pulse test Ciss VDS = 25V, f=1MHz, VGS = 0V Coss Crss Switching Characteristics td(on) tr td(off) 2/9 80 S 3000 800 50 pF 20 VDD = 38V, ID = 45A, VGS = 10V 15 60 tf 10 Qg Qgs Qgd 100 20 40 VGS = 60 V, ID = 80A, VGS =10V 2007-7-27 ns nC N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 ELECTRICAL CHARACTERISTICS(TCASE=25°C, UNLESS OTHERWISE NOTED) Source-Drain Diode Ratings and Characteristics Symbol Test Conditions IS ISM VSD 3/9 Max. Unit VGS = 0V, Source-drain Current 80 A Repetitive; pulse width limited by TJM 320 A 1.4 V IF = 80A, VGS = 0 V Min. Typ. 0.98 trr VGS = 0 V, Is = 80A 70 ns Qrr dIF=100A/us, Pulse test, t ≤ 300 µs, duty cycle d ≤ 1.5% 200 nC TYPICAL CHARACTERISTICS 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 4/9 TYPICAL CHARACTERISTICS (CONTINUED) 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 TEST CIRCUITS Gate Charge Test Circuit and Waveform Resistive switch Test Circuit and Waveform UIS Test Circuit and Waveform 5/9 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 TEST CIRCUITS (CONTINUED) Peak Diode Recovery dv/dt Test Circuit and Waveform 6/9 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 ORDERING INFORMATION FSM75N75XX Package: T: TO220-3L Packing: Blank: Tube or Bulk MARKING INFORMATION Logo 75N75 Part Number YYWWXX Internal Code Date Code: YY: Year (01=2001) WW: Nth week (01~52) 7/9 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 PACKAGE INFORMATION (I) TO220 Symbol A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Φ 8/9 Min. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 28.6 9.8 2.9 15.9 9 3 Dimensions In Millimeters Nom. Max. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 16 30.6 10.6 3.6 16.4 9.3 3.2 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 Dimensions In Inches Nom. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 0.630 1.126 0.385 0.114 0.626 0.354 0.118 1.204 0.417 0.141 0.645 0.366 0.126 2007-7-27 N-CHANNEL 75V 0.0097Ω 80A POWER MOSFET FSM75N75 (2) TO220 Symbol A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA 9/9 Dimensions In Millimeters Nom. Max. 4.60 1.32 2.72 1.27 0.49 0.70 0.61 0.88 1.14 1.70 1.14 1.70 4.95 5.15 2.4 2.7 10.0 10.4 16.4 13.0 14.0 2.65 2.95 15.25 15.75 6.2 6.6 3.5 3.93 3.75 3.85 Min. 4.40 1.23 2.40 Min. 0.173 0.048 0.094 Dimensions In Inches Nom. Max. 0.181 0.051 0.107 0.050 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.027 0.034 0.067 0.067 0.203 0.106 0.409 0.645 0.511 0.104 0.600 0.244 0.137 0.147 0.551 0.116 0.620 0.260 0.154 0.151 2007-7-27